Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T08:07:13.363Z Has data issue: false hasContentIssue false

Robust Lyapunov-based motion control of a redundant upper limb cable-driven rehabilitation robot

Published online by Cambridge University Press:  14 March 2022

Niloufar Sadat Seyfi
Affiliation:
Department of Mechanical Engineering, Faculty of Engineering, Kharazmi University, Tehran, 15719-14911, Iran
Ali Keymasi Khalaji*
Affiliation:
Department of Mechanical Engineering, Faculty of Engineering, Kharazmi University, Tehran, 15719-14911, Iran
*
*Corresponding author. E-mail: keymasi@khu.ac.ir
Rights & Permissions [Opens in a new window]

Abstract

This research presents an upper limb cable-driven rehabilitating robot with one degree of redundancy to improve the movements of the injured. A spatial trajectory is planned through the joint limit avoidance approach to apply the limits of the joint angles, which is a new method for trajectory planning of joints with an allowed definite interval. Firstly, a Lyapunov-based control is applied to the robot with taking uncertainty and disturbances into consideration. To derive the best responses of the system with considering uncertainty and disturbances, a novel robust tracking controller, namely a computed-torque-like with independent-joint compensation, is introduced. The mentioned new robust controller has not been applied to any cable robot which is the novelty of this paper to derive a superior output and the robustness of the given approach. Stability analysis of both controllers is demonstrated and the outputs of the controllers are compared for an exact three-dimensional motion planning and desirable cable forces. Eventually, the proposed novel controller revealed a better function in the presence of uncertainties and disturbances with about 28.21% improvement in tracking errors and 69.22% improvement in the required cable forces as control inputs, which is a considerable figure.

Information

Type
Research Article
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Figure 1.The proposed upper limb cable-driven rehabilitation robot scheme.

Figure 1

Table I.Figures for the upper limb cable-driven rehabilitating system and human upper limb.

Figure 2

Table II.Allowed movement interval of hand joints.

Figure 3

Figure 2.Path planning of hand joints in the absence and the presence of the JLA approach.

Figure 4

Figure 3.The diagram of the Lyapunov-based control for the upper limb cable rehabilitating robot.

Figure 5

Figure 4.The Lyapunov-based control in the lack of uncertainty and disturbance. (a) Desired and actual joint angles of hand motion. (b) Trajectory tracking of a spatial reference path.

Figure 6

Figure 5.Control inputs of the system in the Lyapunov-based control in the lack of uncertainties and disturbances.

Figure 7

Figure 6.The Lyapunov-based control with considering uncertainty and disturbance. (a) Desired and actual joint angles of hand motion. (b) Trajectory tracking of a spatial reference path.

Figure 8

Figure 7.Cable forces in the Lyapunov-based control with considering uncertainty and disturbance.

Figure 9

Figure 8.Block diagram of the computed-torque-like control with independent-joint compensation for the upper limb cable-driven rehabilitating system.

Figure 10

Figure 9.Compared hand joint angles in the computed-torque-like control with independent-joint compensation with considering uncertainty and disturbance.

Figure 11

Figure 10.Tracking errors in x, y, and z coordinate in computed-torque-like control with and without the independent-joint compensation with considering uncertainty and disturbance.

Figure 12

Figure 11.The control inputs in the computed-torque-like control with and without independent-joint compensation with considering uncertainty and disturbance.

Figure 13

Table III.The tracking errors and control inputs in computed-torque-like control in the presence and absence of independent-joint compensation.

Figure 14

Figure 12.Compared hand joint angles between the Lyapunov-based control and the computed-torque-like control with independent-joint compensation with considering uncertainty and disturbance.

Figure 15

Figure 13.The tracking in the upper limb between the computed-torque-like control with independent-joint compensation and the Lyapunov-based control with considering uncertainty and disturbance.

Figure 16

Figure 14.Tracking errors in x, y, and z coordinate in the computed-torque-like control with independent-joint compensation and the Lyapunov-based control with considering uncertainty and disturbance.

Figure 17

Figure 15.The control inputs in the computed-torque-like control with independent-joint compensation and the Lyapunov-based control with considering uncertainty and disturbance.

Figure 18

Table IV.The tracking errors and the control inputs in the Lyapunov-based control and the computed-torque-like control with independent-joint compensator.