This paper focuses on overcoming the problem of tracking control in structurally flexible redundant manipulators by utilizing their self-motion capabilities. In the proposed algorithm, the self-motion is evaluated in order to nullify the dominant modal force of flexural motion that is induced by a rigid body motion.

The flexure motions of manipulators, which are induced by joint motion, cause undesired inaccuracy in end-effector tracking. In-plath planning states, joint trajectories are so designed as not to excite but to damp out the flexure motions. The self-motion, inherent in redundant manipulators, can alter joint motion, influencing the flexure motion (by exciting and damping the flexure modes), while not affecting end-effector motion at all. Therefore, the self-motion can be utilized to regulate flexibility and effectively reduce the end-effector tracking error.

The effectiveness and applicability of the proposed algorithm have been demonstrated through numerical simulation with three-link planar robotic manipulators possessing flexible links.