Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T03:45:36.278Z Has data issue: false hasContentIssue false

A Simple Two-step Geometric Approach for the Kinematic Calibration of the 3-PRS Parallel Manipulator

Published online by Cambridge University Press:  14 January 2019

Genliang Chen*
Affiliation:
State Key Laboratory of Mechanical Systems and Vibration, Shanghai Key Laboratory of Digital Manufacturing for Thin-Wall Structures, Shanghai Jiao Tong University, Shanghai 200240, China
Lingyu Kong
Affiliation:
Intelligent Robot Research Center, Zhejiang Lab, Hangzhou 311100, China
Qinchuan Li
Affiliation:
The Mechatronic Institute, Zhejiang Sci-Tech University, Hangzhou 310018, China
Hao Wang
Affiliation:
State Key Laboratory of Mechanical Systems and Vibration, Shanghai Key Laboratory of Digital Manufacturing for Thin-Wall Structures, Shanghai Jiao Tong University, Shanghai 200240, China
*
*Corresponding author. E-mail: leungchan@sjtu.edu.cn
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Kinematic calibration plays an important role in the improvement of positioning accuracy for parallel manipulators. Based on the specific geometric constraints of limbs, this paper presents a new kinematic parameter identification method for the widely studied 3-PRS parallel manipulator. In the proposed calibration method, the planes where the PRS limbs exactly located are identified firstly as the geometric characteristics of the studied parallel manipulator. Then, the limbs can be considered as planar PR mechanisms whose kinematic parameters can be determined conveniently according to the limb planes identified in the first step. The main merit of the proposed calibration method is that the system error model which relates the manipulator’s kinematic errors to the output ones is not required for kinematic parameter identification. Instead, only two simple geometric problems need to be established for identification, which can be solved readily using gradient-based searching algorithms. Hence, another advantage of the proposed method is that parameter identification of the manipulator’s limbs can be accomplished individually without interactive impact on each other. In order to validate the effectiveness and efficiency of the proposed method, calibration experiments are conducted on an apparatus of the studied 3-PRS parallel manipulator. The results show that using the proposed two-step calibration method, the kinematic parameters can be identified quickly by means of gradient searching algorithm (converge within five iterations for both steps). The positioning accuracy of the studied 3-PRS parallel manipulator has been significantly improved by compensation according to the identified parameters. The mean position and orientation errors at the validation configurations have been reduced to 1.56 × 10−4 m and 1.13 × 10−3 rad, respectively. Further, the proposed two-step kinematic calibration method can be extended to other limited-degree-of-freedom parallel manipulators, if proper geometric constraints can be characterized for their kinematic limbs.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 2019