Hostname: page-component-74656f9884-8rzl6 Total loading time: 0 Render date: 2026-11-06T00:33:35.787Z Has data issue: false hasContentIssue false
  • English
  • Français

Solving nonlinear optimal path tracking problem using a new closed loop direct–indirect optimization method: application on mechanical manipulators

Published online by Cambridge University Press:  31 August 2018

M. Irani Rahaghi Open the ORCID record for M. Irani Rahaghi [Opens in a new window]  and
F. Barat
M. Irani Rahaghi*
Affiliation:
Department of Mechanical Engineering, Islamic Azad University, Kashan Branch, Kashan, Iran
F. Barat
Affiliation:
Department of Mechanical Engineering, University of Kashan, Kashan, Iran. E-mail: farzaneh_barat@yahoo.com
*
*Corresponding author. E-mail: irani@kashanu.ac.ir
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The purpose of this study is to determine the dynamic load carrying capacity (DLCC) of a manipulator that moves on the specified path using a new closed loop optimal control method. Solution methods for designing nonlinear optimal controllers in a closed-loop form are usually based on indirect methods, but the proposed method is a combination of direct and indirect methods. Optimal control law is given by solving the nonlinear Hamilton–Jacobi–Bellman (HJB) partial differential equation. This equation is complex to solve exactly for complex dynamics, so it is solved numerically using the Galerkin procedure combined with a nonlinear optimization algorithm. To check the performance of the proposed algorithm, the simulation is performed for a fixed manipulator. The results represent the efficiency of the method for tracking the pre-determined path and determining the DLCC. Finally, an experimental test has been done for a two-link manipulator and compare with simulation results.

Keywords

Optimal controlNonlinear optimizationHJBTrackingDLCC of manipulators

Information

Type
Articles
Information
Robotica , Volume 37 , Issue 1 , January 2019 , pp. 39 - 61
Copyright
Copyright © Cambridge University Press 2018 

References

1. Kong, M., Chen, Z., Ji, C. and You, W., “Optimal Point-to-point Motion Planning of Heavy-Duty Industry Robot with Indirect Method,” International Conference on Robotics and Biomimetics (2013) pp. 768–773.Google Scholar
2. Kashiri, N., Ghasemi, M. H. and Dardel, M., “An iterative method for time optimal control of dynamic systems,” Arch. Control Sci. 21 (1), 5–23 (2011).Google Scholar
3. Korayem, M. H., Irani, M. and Rafee Nekoo, S., “Motion control and dynamic load carrying capacity of mobile robot via nonlinear optimal feedback,” Int. J. Manuf. Mater. Sci. 2 (1), 16–21 (2012).Google Scholar
4. Korayem, M. H. and Irani, M., “New optimization method to solve motion planning of dynamic systems: Application on mechanical manipulators,” Multibody Syst. Dyn. 31 (2), 169–189 (2014).Google Scholar
5. Kong, M., Chen, Z., Ji, C. and Liu, M., “Optimal Point-to-point Motion Planning of Flexible Parallel Manipulator with Adaptive Gauss Pseudo-Spectral Method,” International Conference on Advanced Intelligent Mechatronics (AIM) (2014) pp. 852–858.Google Scholar
6. Korayem, A. H., Irani Rahagi, M., Babaee, H. and Korayem, M. H., “Maximum load of flexible joint manipulators using nonlinear controllers,” Robotica — 35 (1), pp. 119–142 (2017).Google Scholar
7. Shafei, A. M. and Korayem, M. H., “Theoretical and experimental study of DLCC for flexible robotic arms in point-to-point motion,” Optim. Control Appl. Methods 38 (6), 963–972 (2017).Google Scholar
8. Korayem, M. H., Shafei, A. M. and Shafei, H. R., “Dynamic modeling of nonholonomic wheeled mobile manipulators with elastic joints using recursive Gibbs-Appell formulation,” Sci. Iran. 19 (4), 1092–1104 (2012).Google Scholar
9. Korayem, M. H., Irani Rahagi, M., and Nekoo, S. Rafee, “Load maximization of flexible joint mechanical manipulator using nonlinear optimal controller,” Acta Astronaut 69 (7–8), 458–469 (2011).Google Scholar
10. Guo, W., Li, R., Cao, C., Tong, X. and Gao, Y., “A new methodology for solving trajectory planning and dynamic load-carrying capacity of a robot manipulator,” Math. Probl. Eng. (2016) 28 pages.Google Scholar
11. Wu, J., Chen, X., Wang, L. and Liu, X., “Dynamic load-carrying capacity of a novel redundantly actuated parallel conveyor,” Nonlinear Dyn. 78 (1), 241–250 (2014).Google Scholar
12. Kong, M., Chen, Z. and Ji, C., “Optimal Point-to-point Motion Planning of Flexible Parallel Manipulator with Multi-Interval Radau Pseudospectral Method,” MATEC Web of Conferences, 42, EDP Science (2016).Google Scholar
13. Fen, L., Jiang-hai, Z., Xiao-bo, S., Pei-ying, Z., Shi-hui, F. and Zhong-jie, L., “Path Planning of 6-DOF Humanoid Manipulator Based on Improved Ant Colony Algorithm,” Control and Decision Conference (ccdc) (2012) pp. 4158–4161.Google Scholar
14. Gallant, A. and Gosselin, C., “Parametric trajectory optimisation for increase payload,” Trans. Canadian Soc. Mech. Eng. 40 (2), 125–137 (2016).Google Scholar
15. Korayem, M. H., Azimirad, V. and Irani Rahagi, M., “Maximum allowable load of mobile manipulator in the presence of obstacle using non-linear open and closed loop optimal control,” Arab. J. Sci. Eng. 39 (5), 4103–4117 (2014).Google Scholar
16. Chen, C. T. and Liao, T. T., “Trajectory planning of parallel kinematic manipulators for the maximum dynamic load-carrying capacity,” Meccanica 51 (8), 1653–1674 (2016).Google Scholar
17. Kirk, D. E., Optimal Control Theory. (Prentice-Hall Inc, Englewood Cliffs, New Jersey, USA, 1970).Google Scholar
18. Fletcher, C., “Computational Galerkin Methods,” In: Springer Series in Computational Physics (Springer Verlag, New York, 1984).Google Scholar
19. Beeler, S. C., Tran, H. T. and Banks, H. T., “Feedback control methodologies for nonlinear systems,” J. Optim. Theory Appl. 107 (1), 1–33 (2000).Google Scholar
20. Cizniar, M., Fikar, M. and Latifi, M. A., “Matlab Dynamic Optimisation Code,” Institute of Information Engineering, Automation, and Mathematics, Department of Information Engineering and Process Control, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Radlinského 9, 812 37 Bratislava, Slovak Rebublic (2009).Google Scholar
21. Korayem, M. H. and Nikoobin, A., “Maximum payload for flexible joint manipulators in point-to point task using optimal control approach,” Int. J. Adv. Manuf. Technol. 38, 1045–1060 (2008).Google Scholar