Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T12:15:15.023Z Has data issue: false hasContentIssue false

An Air-Assist Spray Nozzle for Applying Herbicides in Ultralow Volume

Published online by Cambridge University Press:  12 June 2017

Chester G. McWhorter
Affiliation:
South. Weed Sci. Lab., Agric. Res. Serv., U.S. Dep. Agric., Stoneville, MS 38776
Floyd E. Fulgham
Affiliation:
South. Weed Sci. Lab., Agric. Res. Serv., U.S. Dep. Agric., Stoneville, MS 38776
William L. Barrentine
Affiliation:
Delta Branch, Mississippi Agric. and For. Exp. Stn., Stoneville, MS 38776

Abstract

An air-assist spray nozzle was constructed to apply herbicides in oil or water at volumes as low as 2.3 L/ha. The spray was metered through a disc orifice inside the nozzle and forced into an airstream which atomized the liquid. The nozzle produced 16 to 54 spray droplets/cm2 with air pressures from 3.4 to 62 kPa from a 2-mm outlet using a lightweight paraffinic oil. The number of spray droplet deposits produced with a paraffinic oil at 34 kPa increased from 7 droplets/cm2 with a 0.8-mm outlet to 48 droplets/cm2 with a 2.4-mm outlet. The nozzle was designed primarily to apply herbicides in oil at 2.3 to 4.7 L/ha, but it has the capability of applying 150 L/ha of oil or water.

Information

Type
Special Topics
Copyright
Copyright © 1988 by the Weed Science Society of America 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable