Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T07:41:02.173Z Has data issue: false hasContentIssue false

Calibration of Greenhouse Spray Chambers—The Importance of Dynamic Nozzle Patternation

Published online by Cambridge University Press:  12 June 2017

Thomas M. Wolf
Affiliation:
Agriculture and Agri-Food Canada, Regina Research Station, Box 440, Regina, SK, Canada S4P 3A2
Shu Hua Liu
Affiliation:
Agriculture and Agri-Food Canada, Regina Research Station, Box 440, Regina, SK, Canada S4P 3A2
Brian C. Caldwell
Affiliation:
Agriculture and Agri-Food Canada, Regina Research Station, Box 440, Regina, SK, Canada S4P 3A2
Andrew I. Hsiao
Affiliation:
Agriculture and Agri-Food Canada, Regina Research Station, Box 440, Regina, SK, Canada S4P 3A2

Abstract

In an attempt to refine calibration procedures for greenhouse spray chambers, the effects of an herbicide adjuvant, operating pressure, and travel speed on the static and dynamic spray patterns of single flat-fan hydraulic nozzle tips were studied. The volume output in the central 15 cm of the spray pattern (where target plants would ordinarily be positioned) was used as an indicator of the relative dosages received from both a tapered flat-fan tip (8001 VS) and an even-spray tip (8001 EVS). All tested variables significantly altered the spray pattern. Specifically, dynamic spray patterns differed from static patterns, and speed of travel affected the dynamic pattern for both tapered and even flat-fan sprays. Increasing the travel speed from 0.375 to 0.75 m/s reduced spray deposit in the central 15 cm of the spray pattern by up to 19% for water, and by up to 34% for water containing 0.1% v/v nonionic surfactant. Increasing surfactant concentration to 1% decreased the magnitude of the speed effect. Higher pressure sprays tended to reduce the effect of increased travel speeds. These results show that changes in physicochemical properties of the spray solution as well as air turbulence introduced by nozzle movement can affect the pesticide dosage to which a target plant is exposed in a spray chamber. For proper treatment comparison, delivery systems for greenhouse spray experiments should be calibrated with end-use spray liquids, operating pressures, and nozzle travel speeds.

Information

Type
Research
Copyright
Copyright © 1997 by the Weed Science Society of America 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable