Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T18:05:30.855Z Has data issue: false hasContentIssue false

On the formation of cores in accreting filaments and the impact of ambient environment on it

Published online by Cambridge University Press:  14 November 2024

Sumedh Vinayak Anathpindika*
Affiliation:
Indian Institute of Technology, Kharagpur, West Bengal, IndiaUniversity Observatory München, München, Germany
James Di Francesco
Affiliation:
National Research Council of Canada, Herzberg, Astronomy & Astrophysics Research Centre, Victoria, BC V9E 2E7, Canada
*
Corresponding author: Sumedh Vinayak Anathpindika; Email: sumed_k@yahoo.co.in
Rights & Permissions [Opens in a new window]

Abstract

Results from some recent numerical works, including ours, lend credence to the thesis that the ambient environment, that is, the magnitude of external pressure, affects the star-forming ability of clouds and filaments. In continuation with our series of papers on this subject, we explore this thesis further by developing new hydrodynamic simulations of accreting filaments confined by external pressures in the range $10^{4 -7}$ K cm$^{-3}$. Our principal findings are – (i) irrespective of linemass, filament-fragmentation generally yields spheroidal cores. The initially sub-critical filaments in low to intermediate external pressure environments form broad cores suggesting that weakly self-gravitating filaments must fragment via the collect – and- collapse mode to form broad cores. Transcritical filaments, by contrast, become susceptible to the Jeans-type instability and form pinched cores; (ii) the ambient environment bears upon the physical properties of filaments including their FWHM$_{fil}$. Only the filaments initially suffused with subsonic turbulence in Solar-Neighbourhood-like environments, however, have FWHM$_{fil}$$\sim$ 0.1 pc. In high pressure environs such filaments not only have much smaller widths, but also become severely eviscerated. On the contrary, filaments suffused with initially supersonic turbulence are typically broader; (iii) the quasi-oscillatory nature of velocity gradients must be ubiquitous along filament lengths and its magnitude generally increases with increasing pressure. The periodicity of the velocity gradients approximately matches the fragmentation lengthscale of filaments; (iv) oscillatory features of the radial component of the velocity gradient are a unreliable proxy for detecting signatures of accretion onto filaments; and (v) filaments at either extreme of external pressure are inefficient at cycling gas into the dense phase which could reconcile the corresponding inefficiency of star-formation in such environments.

Information

Type
Research Article
Copyright
© The Author(s), 2024. Published by Cambridge University Press on behalf of Astronomical Society of Australia
Figure 0

Table 1.Physical parameters for simulations discussed below.

Figure 1

Figure 1.Cartoon showing the schematic set-up of the test filament and the envelope of gas to be accreted by it. Shown on the left hand is a cross-section of this system; $r_{fil}$ and $r_{env}$ here denote the initial radius of the filament and the radius of the envelope of gas to be accreted, respectively.

Figure 2

Table 2.Classification of simulations listed in Table 1 on the basis of $f_{cyl}$.

Figure 3

Figure 2.Top-panel: Temporal evolution of the concentration parameter. Central-panel: The concentration parameter as a function of the external pressure. Data points on both these plots represent the value of C at different epochs of filament evolution. The continuous line here represents the locus of mean values of C for each simulation. Lower-panel: Radial density profiles of the filaments in respective simulations at the terminal epoch of their evolution.

Figure 4

Figure 3.Temporal variation of the radial component of the Divergence of the velocity field within the filament.

Figure 5

Figure 4.Temporal variation of the fraction of mass having density $\gtrsim 10^{18}$ g cm$^{-3}$ in different simulations. Individual data points in this plot represent the mean value of $M_{frac}$ at each epoch. See text for further explanation.

Figure 6

Figure 5.Left panel : Temporal variation of the dense gas fraction in different simulations. Right panel : NPDF of molecular Hydrogen in filaments at their respective terminal epochs. As in Fig. 4 the lightly shaded region about each characteristic in either plot represents the variation of the respective quantities over the realisations developed with 5 random number seeds for different choices of the external pressure.

Figure 7

Figure 6.Axial component of velocity gradient for filaments at different epochs of their evolution for different choices of external pressure. Given the identical nature of these plots and in the interests of brevity, we show here only a few cases such that they span the entire range of $P_{ext}$ & linemasses explored in this work. As with the plot on the lower panel of Fig. 2, these plots are also made from one of the simulations developed with 5 different random number seeds for each $P_{ext}$.

Figure 8

Figure 7.Same as in Fig. 6 but now showing the radial component of velocity gradient.

Figure 9

Figure 8.Similar to plots in Figs. 6 & Fig. 7, but now shown for only the terminal epoch of the filaments in respective simulations and superposed with the location of density peaks along the filament-length.

Figure 10

Figure 9.Left – panel: Temporal variation of the FWHM$_{fil}$. As in the Fig. 2, 4 & 5 the lightly shaded region about each characteristic in either plot represents the variation of the FWHM$_{fil}$ over the simulations developed with 5 random number seeds for different choices of the external pressure. Right – panel: FWHM$_{fil}$ as a function of external pressure. Multiple data points for a given external pressure were generated by calculating the FWHM$_{fil}$ at different epochs of filament evolution. The thick black line on this plot represents the locus of points corresponding to the mean FWHM$_{fil}$ for each simulation. As before, individual data points here represent the mean value of FWHM$_{fil}$ across the simulations developed with 5 random number seeds for different $P_{ext}$.

Figure 11

Figure 10.Similar to the plots in Fig. 9, but now showing respectively the column density, velocity dispersion, and the Virial parameter are shown on the top, central & bottom panels.

Figure 12

Figure 11.Similar to the plots in Figs. 9 & 10, but now showing respectively the column density, and the velocity dispersion as a function of the external pressure.

Figure 13

Figure 12.Like the earlier plots in Figs. 9, 10 & 11 but now showing the turbulent pressure, $P_{turb}$, as a function of the external pressure. The black continuous line represents as before the locus of points corresponding to the mean $P_{turb}$ for each simulation.

Figure 14

Figure A1.Rendered density images showing the evolutionary sequence of the filaments in respectively Cases 1 (Upper panel) and 3 (Lower panel).

Figure 15

Figure A2.As in Fig. A1 but now for respectively Cases 3 (Upper panel), and 4 (Lower panel).

Figure 16

Figure A3.As in Figs. A1 & A2 but now showing the terminal epoch of the filament in respectively Cases 5 (Top panel left) and 10 (Top panel right). Similarly the terminal epoch of the filaments in respectively Cases 6, 11, 12, & 13 are shown on the lower panel from left to right.