Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T09:45:12.585Z Has data issue: false hasContentIssue false

Kinematics and dynamics of pitching flexible panels in a quiescent fluid

Published online by Cambridge University Press:  07 July 2021

Parag Deshpande*
Affiliation:
UAV Design and Integration Division, CSIR-National Aerospace Laboratories, Bangalore 560037, India
Abhijeet Vishwasrao
Affiliation:
Defence Institute of Advanced Technology, Department of Aerospace Engineering, Pune 411025, India
*
†Email address for correspondence: parag@nal.res.in

Abstract

An experimental investigation was carried out to understand the kinematics and dynamics of flexible panels having pure pitching motion in a quiescent fluid. Simultaneous measurements of force and angular position of a panel were performed for various panel configurations. A high-speed camera imaging technique was used to find the instantaneous position of the trailing edge. The wake vortex flow was also quantified using the particle image velocimetry technique (PIV). We established a generic correlation between a time-averaged thrust coefficient $C_T$ and an effective flexural stiffness $\varPi$ of the panel. The results in terms of both time and phase-evolution of hydrodynamic forces and torque are exhibited through the complete kinematics and dynamics of the pitching panels, perhaps for the first time. The elastic deformation of the flexible panel at stroke reversals is found to affect the longitudinal force generation significantly when compared with the rigid panel. We have described many interesting features related to the elastic deformation of the panel. During stroke reversal, the motion of the pitching for the flexible panels reduces when compared to the pitching motion imposed by the forcing function. Reduced panel motion is found to aid thrust generation for a longer time in a cycle for which magnitude is indirectly governed by the flexural stiffness of the panel. The onset of instantaneous thrust and trailing-edge vortex generation is found to match precisely with the spatio-temporal location of the panel inflection. We noted that both the maximum phase lag $\phi$ and corresponding hydrodynamic torque $T_{hyd}$ are strongly correlated to the panel's effective flexural stiffness $\varPi$.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Schematic of the experimental set-up. An inset shows detailed geometry of the panel. The hatched ‘T’ portion shown is the clamping surface to held the panel firmly to the pitching shaft.

Figure 1

Table 1.Compilation of the panel configurations based their geometrical specifications and elastic properties. The panel configurations are defined by writing a number corresponding to an aspect ratio as a subscript to the panel name.

Figure 2

Figure 2.Coefficient of mean thrust as a function of (a) aspect ratio (b) effective flexural stiffness. $\circ$, panel A; $\Box$, panel B; $\vartriangle$, panel C; $\triangledown$, panel D.

Figure 3

Figure 3.Coefficient of mean thrust as a function of effective flexural stiffness for all the panel configurations having various aspect ratios.

Figure 4

Figure 4.Half-pitching cycle for panel $C_3$ illustrated by six different phases. (a) The rigid pointer is at the extreme left and about to begin an anti-clockwise motion and the panel is lagging behind the pointer and still completing a clockwise motion owing to the flexibility effect. (b) Both the pointer and panel are moving towards each other and the phase lag between them is reducing. (c) Panel inflection phase, where the pointer and the panel cross each other. (d) The panel reaches the extreme left and is about to start an anti-clockwise motion. (e) Both the pointer and panel have an anti-clockwise motion, and the phase lag continues to rise from $0^\circ$ at the panel inflection phase to its peak. (f) The pointer has reached the extreme right of the stroke and is about to begin the second half of the pitching cycle.

Figure 5

Figure 5.Kinematics of the pitching cycle. Instantaneous angular position of the cosine forcing function of the pitching motion, solid line; instantaneous angular positions of leading edge, $\circ$; trailing edge: $\Box$ and phase lag, $\vartriangle$ for (a) panel $A_3$ ($\varPi = 3.27$) (b) panel $B_3$ ($\varPi = 0.18$) (c) panel $C_3$ ($\varPi = 0.06$) (d) panel $D_3$ ($\varPi = 0.001$) having same aspect ratio of 0.625.

Figure 6

Figure 6.Time required for storing (filled symbols) and releasing (empty symbols) of strain energy for various panel configurations.

Figure 7

Figure 7.Comparison of the single-cycle data with the phase-averaged data for (a) longitudinal force ($F_x$) and (b) lateral force ($F_y$) force for panel $B_3$.

Figure 8

Figure 8.Instantaneous forces, angular position of the leading edge and phase lag between the leading edge and trailing edge of the panel plotted against a non-dimensional cycle time. Longitudinal force ($F_x$), $\blacktriangle$; lateral force ($F_y$), $\triangledown$; phase lag ($\phi$), solid line; TE angle, dashed line; for (a) panel $A_3$ ($\varPi = 3.27$) (b) panel $B_3$ ($\varPi = 0.18$) (c) panel $C_3$ ($\varPi = 0.06$) (d) panel $D_3$ ($\varPi = 0.001$) having same aspect ratio of 0.625.

Figure 9

Figure 9.Instantaneous forces, angular position of the leading edge and phase lag between the leading edge and trailing edge of the panel plotted against a non-dimensional cycle time. Longitudinal force ($F_x$), $\blacktriangle$; lateral force ($F_y$), $\triangledown$; phase lag ($\phi$), solid line; TE angle, dashed line; for (a) panel $B_1$ ($\varPi = 0.08$) (b) panel $C_6$ ($\varPi = 0.25$) having aspect ratio of 0.44 and 1.1, respectively.

Figure 10

Figure 10.Instantaneous forces, angular position of the leading edge and phase lag between the leading edge and trailing edge of the panel plotted against a non-dimensional cycle time. Longitudinal force ($F_x$), $\blacktriangle$; lateral force ($F_y$); $\triangledown$; phase lag ($\phi$), solid line; TE angle, dashed line; for (a) panel $B_6$ ($\varPi = 0.77$) (b) panel $C_8$ ($\varPi = 0.62$) having aspect ratio of 1.1 and 1.6, respectively.

Figure 11

Figure 11.Instantaneous torque ($T_{hyd}$) experienced by the panel plotted against a non-dimensional cycle time. Torque ($T_{hyd}$), $\triangledown$; phase lag ($\phi$), solid line; TE angle, dashed line; for (a) panel $A_3$ ($\varPi = 3.27$) (b) panel $B_3$ ($\varPi = 0.18$) (c) panel $C_3$ ($\varPi = 0.06$) (d) panel $D_3$ ($\varPi = 0.001$) having same aspect ratio of 0.625.

Figure 12

Figure 12.Variation of $T_{hyd}$, $F_y$ and $F_x$ as a function of $\phi$ for panel B (dashed line) and panel C (solid line) for aspect ratio (a) 0.44 ($\varPi _{B1} = 0.08$ and $\varPi _{C1} = 0.026$) (b) 0.625 ($\varPi _{B3} = 0.18$ and $\varPi _{C3} = 0.06$) (c) 1.1 ($\varPi _{B6} = 0.77$ and $\varPi _{C6} = 0.25$) and (d) 1.6 ($\varPi _{B8} = 1.92$ and $\varPi _{C8} = 0.62$). Filled circle and arrow show the beginning and direction of the cycle.

Figure 13

Figure 13.Variation of (a) $C_{Tq}/\phi _{max}$ and (b) $\delta _{max}, _h/c$ as a function of $\varPi$. the symbols $\Box$ and $\circ$ depict panel B and C configurations, respectively. Filled and empty symbols in figure 13(b) denote $\delta _{max}$ and $\delta _h$, respectively. The schematic defining $\delta _{max}$ and $\delta _h$ is depicted in the inset of figure 13(b).

Figure 14

Figure 14.Flow-field characteristics for panel $A_3$ are illustrated by the phase-averaged vorticity field superimposed with velocity vectors shown at different instances in a pitching cycle. Both the panel and pointer are pitching from left to right. Normalised vorticity contour levels shown are $\omega ^* = 5, 10, 15,\ldots$ .

Figure 15

Figure 15.Flow-field characteristics for panel $B_3$ are illustrated by the phase-averaged vorticity field superimposed with velocity vectors shown at different instances in a pitching cycle. Both the panel and pointer are pitching from left to right. Normalised vorticity contour levels shown are $\omega ^* = 5, 10, 15,\ldots$ .

Figure 16

Figure 16.Flow-field characteristics for panel $C_3$ are illustrated by the phase-averaged vorticity field superimposed with velocity vectors shown at different instances in a pitching cycle. Both the panel and pointer are pitching from left to right. Normalised vorticity contour levels shown are $\omega ^* = 5, 10, 15,\ldots$ .

Figure 17

Figure 17.Flow-field characteristics for panel $D_3$ are illustrated by the phase-averaged vorticity field superimposed with velocity vectors shown at different instances in a pitching cycle. The panel is pitching from left to right and pointer is pitching from right to left. Normalised vorticity contour levels shown are $\omega ^* = 5, 10, 15,\ldots$ .

Deshpande and Vishwasrao supplementary movie 1

Panel B3

Download Deshpande and Vishwasrao supplementary movie 1(Video)
Video 41.8 MB

Deshpande and Vishwasrao supplementary movie 2

Panel C3

Download Deshpande and Vishwasrao supplementary movie 2(Video)
Video 25.8 MB

Deshpande and Vishwasrao supplementary movie 3

Panel D3

Download Deshpande and Vishwasrao supplementary movie 3(Video)
Video 25.6 MB