Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T07:37:01.928Z Has data issue: false hasContentIssue false

Transition to stably stratified states in open channel flow with radiative surface heating

Published online by Cambridge University Press:  09 February 2015

N. Williamson*
Affiliation:
School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney, NSW 2006, Australia
S. W. Armfield
Affiliation:
School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney, NSW 2006, Australia
M. P. Kirkpatrick
Affiliation:
School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney, NSW 2006, Australia
S. E. Norris
Affiliation:
Department of Mechanical Engineering, University of Auckland, Auckland, New Zealand
*
†Email address for correspondence: nicholas.williamson@sydney.edu.au
Rights & Permissions [Opens in a new window]

Abstract

Direct numerical simulations (DNS) of turbulent stratified flow in an open channel with an internal heat source following the Beer–Lambert law from the surface are used to investigate the transition from neutral to strongly stable flow. Our buoyancy bulk parameter is defined through the ratio of the domain height ${\it\delta}$ to $\mathscr{L}$ , a bulk Obukhov length scale for the flow. We cover the range ${\it\lambda}={\it\delta}/\mathscr{L}=0{-}2.0$ , from neutral conditions to the onset of the stable regime, with the Reynolds number range $Re_{{\it\tau}}=200{-}800$ , at a Prandtl number of 0.71. The result is a boundary layer flow where the effects of stratification are weak in the wall region but progressively stronger in the outer layer up to the free surface. At ${\it\lambda}\simeq 1$ the turbulent kinetic energy (TKE) budget is in local equilibrium over a region extending from the near-wall region to a free-surface affected region a distance $l_{{\it\nu}}$ from the surface, with $l_{{\it\nu}}/{\it\delta}\sim Re^{-1/2}$ . In this equilibrium region the flow can be characterised by the flux Richardson number $R_{f}$ and the local Obukhov length scale ${\it\Lambda}$ . At higher ${\it\lambda}$ local mixing limit conditions are observed over an extended region. At ${\it\lambda}=2$ the flux Richardson number approaches critical limit values of $R_{f,c}\simeq 0.18$ and gradient Richardson number $Ri_{c}\simeq 0.2$ . At high ${\it\lambda}$ , we obtain a flow field where buoyancy interacts with the smallest scales of motion and the turbulent shear stress and buoyancy flux are suppressed to molecular levels. We find that this regime can be identified in terms of the parameter $Re_{\mathscr{L},c}=\mathscr{L}u_{{\it\tau}}/{\it\nu}\lesssim 200{-}400$ (where $u_{{\it\tau}}$ is the friction velocity and ${\it\nu}$ the kinematic viscosity), which is related to the $L_{\ast }$ parameter of Flores and Riley (Boundary-Layer Meteorol., vol. 139 (2), 2011, pp. 241–259) and buoyancy Reynolds number $\mathscr{R}$ . With energetic equilibrium attained, the local buoyancy Reynolds number, $Re_{{\it\Lambda}}={\it\Lambda}\langle u^{\prime }w^{\prime }\rangle ^{1/2}/{\it\nu}$ , is directly related to the separation of the Ozmidov ( $l_{O}$ ) and Kolmogorov ( ${\it\eta}$ ) length scales in the outer boundary layer by $Re_{{\it\Lambda}}\simeq \mathscr{R}\equiv (l_{O}/{\it\eta})^{4/3}$ . The inner wall region has the behaviour $\mathscr{R}\sim Re_{\mathscr{L}}Re_{{\it\tau}}$ , in contrast to stratified boundary layer flows where the buoyancy flux is non-zero at the wall and $\mathscr{R}\sim Re_{\mathscr{L}}$ .

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 
Figure 0

Figure 1.Schematic of the flow; the domain is periodic in $x$ and $y$.

Figure 1

Figure 2.Mean temperature profile, $({\it\phi}-{\it\phi}_{0})/(I_{s}/{\it\delta}q_{N})$ at $\mathit{Re}_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$ (a) and $\mathit{Re}_{{\it\tau}}=200{-}800$, ${\it\alpha}{\it\delta}=8{-}32$ (b).

Figure 2

Table 1.Simulation parameters, and measured flow statistics: $E_{r}={\it\lambda}\sqrt{C_{f}/2}$, $C_{f}=2(u_{{\it\tau}}/u_{b})^{2}$, $Ri_{b}={\rm\Delta}{\it\phi}{\it\lambda}{\it\delta}/u_{b}^{2}$, $Ri_{{\it\tau}}={\rm\Delta}{\it\phi}{\it\lambda}{\it\delta}/u_{{\it\tau}}^{2}$, and $Re_{{\it\tau}}^{\ast }$ is Reynolds number based on the measured wall friction velocity $u_{{\it\tau}}^{\ast }$.

Figure 3

Figure 3.Mean buoyancy frequency, $N(z){\it\delta}/u_{{\it\tau}}$ at $\mathit{Re}_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$.

Figure 4

Figure 4.An instantaneous realisation of $({\it\phi}-{\it\phi}_{0})/{\rm\Delta}{\it\phi}$ at $Re_{{\it\tau}}=395$ and ${\it\lambda}=2.0$ (a); ${\it\lambda}=1.0$ (b); ${\it\lambda}=0.1$ (c). Plot depicts full extent of domain, $L_{x}\times L_{z}=2{\rm\pi}\times {\it\delta}$.

Figure 5

Figure 5.Temperature fluctuation normalised as $\langle {\it\phi}^{\prime }{\it\phi}^{\prime }\rangle ^{1/2}/(I_{s}/{\it\delta}q_{N})$ at $\mathit{Re}_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$ (a) and $\mathit{Re}_{{\it\tau}}=200{-}800$, ${\it\alpha}{\it\delta}=8{-}32$ (b).

Figure 6

Figure 6.Variation of instantaneous bulk flow properties over non-dimensional flow time at $\mathit{Re}_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$: (a) skin friction $C_{f}=2\langle u_{{\it\tau}}/u_{b}\rangle ^{2}$ and (b) instantaneous plane-averaged temperature difference ${\rm\Delta}{\it\phi}/\langle {\rm\Delta}{\it\phi}\rangle +A$ where $A$ is a vertical offset given in the figure.

Figure 7

Figure 7.Variation of mean streamwise velocity profile $u$ with height in wall units: (a) for $Re_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$ and ${\it\lambda}=0{-}2.0$; and (b) ${\it\alpha}{\it\delta}=8{-}32$.

Figure 8

Figure 8.Turbulent shear stress, $-\langle u^{\prime }w^{\prime }\rangle$ at $\mathit{Re}_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$ (a) and $\mathit{Re}_{{\it\tau}}=200{-}800$, ${\it\alpha}{\it\delta}=8{-}32$ (b).

Figure 9

Figure 9.Scalar flux normalised as $-\langle {\it\phi}^{\prime }w^{\prime }\rangle /(I_{s}/{\it\delta}q_{N})$ at $\mathit{Re}_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$ (a) and $\mathit{Re}_{{\it\tau}}=395{-}800$, ${\it\alpha}{\it\delta}=8{-}32$ (b).

Figure 10

Figure 10.Turbulence kinetic energy transport terms as a ratio of total dissipation: (a) production $P/({\it\varepsilon}+B)$, (b) turbulent diffusion $T/({\it\varepsilon}+B)$ and (c) buoyancy flux $-B/({\it\varepsilon}+B)$ or equivalently $-R_{f}$.

Figure 11

Figure 11.Variation of length scales $l_{O},l_{C},{\it\eta}$ normalised by ${\it\delta}$ with $z$ for (a) ${\it\lambda}=0{-}2.0$ at $Re_{{\it\tau}}=395$ with lines defined in figure 10; (b) $Re_{{\it\tau}}=200{-}800$ and ${\it\lambda}=0.5{-}1.0$.

Figure 12

Figure 12.Variation of $Ri$ with $z$ for (a) $Re_{{\it\tau}}=395$ with ${\it\lambda}=0.05{-}1.0$ and (b) $\mathit{Re}_{{\it\tau}}=200{-}800$, ${\it\alpha}{\it\delta}=8{-}32$ and ${\it\lambda}=0.5{-}1.0$.

Figure 13

Figure 13.$Pr_{t}$ for ${\it\lambda}=0{-}2.0$.

Figure 14

Figure 14.Variation of $\mathscr{R}$ with $z$ at $\mathit{Re}_{{\it\tau}}=395$ (a) and $\mathit{Re}_{{\it\tau}}=200{-}800$ (b). In (a) the thin solid line indicates $\mathscr{R}=Re_{{\it\Lambda}}$ estimated from $Re_{{\it\Lambda}}=(1-z)^{2}Re_{{\it\tau}}/{\it\lambda}(z-\text{e}^{(z-1){\it\alpha}{\it\delta}})$ at $Re_{{\it\tau}}=395$ and ${\it\lambda}=0.5$. Solid horizontal line indicates $\mathscr{R}=7$.

Figure 15

Figure 15.Streamwise r.m.s. velocity, $\langle u^{\prime }u^{\prime }\rangle ^{1/2}$ at $\mathit{Re}_{{\it\tau}}=395$, ${\it\alpha}{\it\delta}=8$ (a) and $\mathit{Re}_{{\it\tau}}=395{-}800$, ${\it\alpha}{\it\delta}=8{-}32$ (b).

Figure 16

Figure 16.Wall-normal r.m.s. velocity, $\langle w^{\prime }w^{\prime }\rangle ^{1/2}$ with lines defined in figure 15.

Figure 17

Figure 17.Spanwise r.m.s. velocity, $\langle v^{\prime }v^{\prime }\rangle ^{1/2}$ with lines defined in figure 15.

Figure 18

Figure 18.Variation of bulk parameter $Ri_{b}$ with ${\it\lambda}$, where the symbols indicate $Pr=0.7{-}0.71$ results: ▫, $Re_{{\it\tau}}=200$; ♦, $Re_{{\it\tau}}=395$; $\,$, $Re_{{\it\tau}}=800$; ○, ${\it\alpha}{\it\delta}=32$; $+$, Garcia-Villalba & del Alamo (2011) $Re_{{\it\tau}}=180$; ♢, Garcia-Villalba & del Alamo (2011) $Re_{{\it\tau}}=550$; ▵, Taylor et al. (2005) $Re_{{\it\tau}}=400$, $Pr=5.0$ result normalised to $Ri_{b}~(0.71/5.0)$. Lines are defined: – – – –, $Ri_{b}=0.16{\it\lambda}^{4/3}$; ——, $Ri_{b}=9{\it\lambda}Pr/Re_{{\it\tau}}$ with $Pr=0.71$ and $Re_{{\it\tau}}=395$.

Figure 19

Figure 19.$l_{m}{\it\delta}/R_{f}{\it\Lambda}$ for $Re_{{\it\tau}}=395$ with ${\it\lambda}=0.05{-}2.0$.

Figure 20

Figure 20.Variation of eddy viscosity ratio, $k_{m}/{\it\nu}$, with $\mathscr{R}$ at $\mathit{Re}_{{\it\tau}}=395$ (a) and $\mathit{Re}_{{\it\tau}}=200{-}800$ (b). Straight solid line indicates $k_{m}/{\it\nu}=0.25\mathscr{R}$.

Figure 21

Figure 21.Log-law constant, ${\it\gamma}=z^{+}\text{d}u/\text{d}z^{+}$. Thin horizontal line indicates $1/{\it\kappa}=2.44$. Closed channel flow data of Moser et al. (1999) at $Re=392$ indicated for comparison.

Figure 22

Figure 22.Variation of near-surface profiles of $\mathscr{R}$ with $(1-z)Re^{1/2}$ with vertical line indicating $(1-z)Re^{1/2}=0.9$.

Figure 23

Figure 23.Turbulent kinetic energy production as a ratio of total dissipation $P/({\it\varepsilon}+B)$ at $\mathit{Re}_{{\it\tau}}=200{-}800$, with location from free surface $(1-z)$ normalised by $Re_{{\it\tau}}^{1/2}$.