Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T18:28:08.536Z Has data issue: false hasContentIssue false

Fabrication of GaN mesa structures

Published online by Cambridge University Press:  13 June 2014

K.V. Vassilevski
Affiliation:
Cree Research EED
M.G. Rastegaeva
Affiliation:
Ioffe Physical-Technical Institute
A.I. Babanin
Affiliation:
Cree Research EED and Ioffe Physical-Technical Institute
I.P. Nikitina
Affiliation:
Cree Research EED and Ioffe Physical-Technical Institute
V.A. Dmitriev
Affiliation:
Cree Research EED and Ioffe Physical-Technical Institute

Abstract

We report on nickel based technology for the fabrication of GaN mesa structures. Ti/Ni ohmic contacts for n-doped GaN with contact resistivity Rc ~2×10−5  Ω×cm2 and Ni ohmic contacts for p-doped GaN with Rc ~ 4×10−2 Ω×cm2 were formed. Both types of contacts were used as masks for GaN reactive ion etching (RIE) in a CCl2F2/Ar gas mixture. Maximum etch rates of ~ 40 nm/min were obtained. Mesa structures up to 3 μm in height were formed.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.The Rtot dependence of ln(R/r) for Ti/Ni contact on n-GaN after annealing for 30 sec at 1040°C. The scheme of pattern used for contact resistivity measurements is shown in the inset. The black regions are covered by metal.

Figure 1

Figure 2.The AES profiles of Ti/Ni contacts: (1) as deposited; (2) annealed at 600°C for 300 sec; (3) annealed at 950°C for 140 sec; and (4) annealed at 1040°C for 140 sec.

Figure 2

Figure 3.The SEM micrograph of a cleaved GaN/SiC sample with a stripe-like mesa structure formed by RIE in CCl2F2:Ar (12 sccm : 12 sccm) at 10 mTorr. The Ni mask, deposited by e-beam sputtering, is not removed.

Figure 3

Figure 4.The Rtot dependence of ln(R/r) for Ni contact on p-GaN.