Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-19T06:42:11.407Z Has data issue: false hasContentIssue false

Theoretical Model for Analysis and Optimization of Group III-Nitrides Growth by Molecular Beam Epitaxy

Published online by Cambridge University Press:  13 June 2014

M. V. Averyanova
Affiliation:
Russian Research Center “Applied Chemistry”
S. Yu. Karpov
Affiliation:
Advanced Technology Center
Yu. N. Makarov
Affiliation:
Lehrstuhl für Strömungsmechanik, University of Erlangen-Nürnberg
I. N. Przhevalskii
Affiliation:
Russian Research Center “Applied Chemistry”
M. S. Ramm
Affiliation:
Ioffe Physical-Technical Institute
R. A. Talalaev
Affiliation:
Ioffe Physical-Technical Institute

Abstract

A theoretical model which accounts for a physisorption precursor of molecular nitrogen is proposed for the analysis of group III-nitride growth by molecular beam epitaxy (MBE). The kinetics of nitrogen evaporation are found to be an essential factor influencing the MBE growth process of group III-nitrides. The high thermal stability of nitrides is explained to be related to the desorption kinetics resulting in a low value of the evaporation coefficient. The values of the evaporation coefficients as functions of temperature are extracted from the experimental Langmuir evaporation data of GaN and AlN. Using the revised thermodynamic properties of the group III-nitrides, and the obtained values of the evaporation coefficient, the process parameter dependent growth rate and transition to extra liquid phase formation during the GaN MBE are calculated. The theoretical results are compared to the available experimental data.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.The configuration diagram for the physisorption precursor of N2. and are the vacuum energy levels of the gaseous Ga and N2, respectively.

Figure 1

Figure 2.Boundary of liquid phase formation for GaN calculated at a Ga flux of 0.15 ML/s. The dashed-dotted line shows results obtained via a pure thermodynamic approach [3]. The solid line is obtained by the model proposed in this work (the high-temperature branch of this curve is not plotted since it lies above 2000°C). The shaded area indicates typical conditions of GaN growth by plasma enhanced and ion assisted MBE.

Figure 2

Figure 3.Critical growth rate resulting in liquid phase appearance. The solid circles represent data points at which GaN growth with droplets was observed, and the open circles are data points at which the growth was without droplets [12][13]. The solid curve shows the results of our calculations assuming an incident nitrogen flux of 0.15 ML/s.

Figure 3

Figure 4.Growth rate of GaN vs temperature calculated for different V/III ratios. The incident Ga flux corresponds to the low temperature growth rate of 0.2 μm/h. The experimental points are taken from Ref. [4].