Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T13:31:04.841Z Has data issue: false hasContentIssue false

Growth of Oriented Thick Films of Gallium Nitride from the Melt

Published online by Cambridge University Press:  13 June 2014

Jeffrey S. Dyck
Affiliation:
Dept of Chemical Engineering
Kathleen Kash
Affiliation:
Dept of Chemical Engineering
Michael T. Grossner
Affiliation:
Dept of Chemical Engineering
Cliff C. Hayman
Affiliation:
Dept of Chemical Engineering
Alberto Argoitia
Affiliation:
Dept of Chemical Engineering
Nan Yang
Affiliation:
Dept of Materials Science and Engineering
Moon-Hi Hong
Affiliation:
Dept of Materials Science and Engineering
Martin E. Kordesch
Affiliation:
Dept of Physics and Astronomy, Ohio University, Athens, OH 45701
John C. Angus
Affiliation:
Dept of Chemical Engineering

Abstract

While significant strides have been made in the optimization of GaN-based devices on foreign substrates, a more attractive alternative would be homoepitaxy on GaN substrates. The primary motivation of this work is to explore the growth of thick films of GaN from the melt for the ultimate use as substrate material. We have previously demonstrated the synthesis of polycrystalline, wurtzitic gallium nitride and indium nitride by saturating gallium metal and indium metal with atomic nitrogen from a microwave plasma source. Plasma synthesis avoids the high equilibrium pressures required when molecular nitrogen is used as the nitrogen source. Here we report the growth of thick oriented GaN layers using the same technique by the introduction of (0001) sapphire into the melt to serve as a substrate. The mechanism of this growth is not established, but may involve transport of the metal as a liquid film onto the sapphire and subsequent reaction with atomic nitrogen. The films were characterized by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. X-ray diffraction showed that the GaN films were oriented with their c-axes parallel to the sapphire c-axis. The TEM analysis confirmed the orientation and revealed a dislocation density of approximately 1010 cm−2. The E2 Raman active phonon modes were observed in the GaN films.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Schematic drawings of growth configuration. (a) The metal and substrate are first exposed to a hydrogen plasma to clean the surfaces. (b) After exposure to nitrogen plasma, a thin liquid metal film moves across the substrate and is converted to GaN.

Figure 1

Figure 2.SEM image of a portion of a GaN layer that has peeled away from the (0001) sapphire substrate.

Figure 2

Figure 3.TEM image of GaN film sample A. The arrow marks the direction of the c-axis of the sapphire substrate.

Figure 3

Figure 4.Selected area diffraction pattern of GaN film sample A taken along the[110] zone axis.

Figure 4

Figure 5.Cross-sectional TEM images of a 50 μm thick area of GaN film on (0001) sapphire substrate sample B near the (a) interface, (b) about 5 μm from the interface, and (c) about 20 μm from the interface. The inserts are selective area diffraction patterns taken along the [110] zone axis.

Figure 5

Figure 6.Raman spectrum of GaN film on c-plane sapphire substrate sample B and the spectrum from the substrate before deposition.