Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T21:19:32.285Z Has data issue: false hasContentIssue false

Numerical and asymptotic analysis of the three-dimensional electrohydrodynamic interactions of drop pairs

Published online by Cambridge University Press:  05 March 2021

Chiara Sorgentone
Affiliation:
KTH Mathematics, Linné Flow Centre, 10044 Stockholm, Sweden
Jeremy I. Kach
Affiliation:
Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh PA 15213, USA
Aditya S. Khair
Affiliation:
Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh PA 15213, USA
Lynn M. Walker
Affiliation:
Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh PA 15213, USA
Petia M. Vlahovska*
Affiliation:
Engineering Sciences and Applied Mathematics, Northwestern University, Evanston, IL 60208, USA
*
†Email address for correspondence: petia.vlahovska@northwestern.edu

Abstract

We study the pairwise interactions of drops in an applied uniform DC electric field within the framework of the leaky dielectric model. We develop three-dimensional numerical simulations using the boundary integral method and an analytical theory assuming small drop deformations. We apply the simulations and the theory to explore the electrohydrodynamic interactions between two identical drops with arbitrary orientation of their line of centres relative to the applied field direction. Our results show a complex dynamics depending on the conductivities and permittivities of the drops and suspending fluids, and the initial drop pair alignment with the applied electric field.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Two initially spherical identical drops with radius $a$, permittivity ${\varepsilon }_{{{d}}}$ and conductivity $\sigma _{{{d}}}$ suspended in a fluid with permittivity ${\varepsilon }_{{{s}}}$ and conductivity $\sigma _{{{s}}}$ and subjected to a uniform DC electric field $\boldsymbol {E}^\infty =E_0\boldsymbol {\hat{\boldsymbol{z}}}$. The angle between the line-of-centres vector and the field direction is $\varTheta =\arccos (\boldsymbol {\hat {z}}\boldsymbol {\cdot }\boldsymbol {\hat {d}})$.

Figure 1

Figure 2.Comparison between our fully three-dimensional simulations and the axisymmetric simulations of a drop pair aligned with the field by Baygents et al. (1998). (a) Absolute value of the radial component of the steady drop velocity as a function of separation for $Ca= 0.1$ (red dots) and 1 (blue dots) for a drop with $R=5$, $S=4$. Black dots are the data from figure 9 in Baygents et al. (1998) with $Ca=1$. Solid line is the theoretical $\boldsymbol {U}_2\boldsymbol {\cdot }\boldsymbol {\hat {d}}$ for a drop of low $Ca$ given by (4.7). The drop velocity at large separations shows the $1/d^2$ behaviour of a stresslet flow. (b) Absolute value of the steady velocity of a drop undergoing only a dielectrophoretic force, $R=S=5$, corresponding to figure 4(a) in Baygents et al. (1998). The black dots are from our fully three-dimensional code, the solid line is the dielectrophoretic velocity, (4.2), showing $1/d^4$ dependence.

Figure 2

Figure 3.Comparison between the simulations (black) and the analytical theory (red) for a drop pair with $R=1$, $S=3$, initial separation 3.5, initial angle between the line of centres and the applied field direction $50^{\circ }$ and $Ca=0.1$. The trajectory was computed from the relative drop velocity (4.7). Time evolution of the (a) separation, (b) angle between the line of centres and applied field direction, (c) radial component of the relative velocity $\boldsymbol {U}\boldsymbol {\cdot }\boldsymbol {\hat {d}}$ and (d) tangential component of the relative velocity $\boldsymbol {U}\boldsymbol {\cdot }{\boldsymbol {\hat {t}}}$.

Figure 3

Figure 4.(a) Phase diagram of drop deformations and alignment with the field for different viscosity ratios. The solid lines correspond to $\varPhi ({\lambda }, R, S)=0$ given by (4.8). In the shaded regions, the line of centres of the two drops rotates away from the applied field direction $\varPhi <0$. The dashed line corresponds to the Taylor discriminating function (A3); in the parameter space above it, drop deformation is oblate. (b) Critical separation above which EHD dominates the interactions for ${\lambda }=1$ and $S=0.1$ (blue), $S=1$ (black) and $S=10$ (red).

Figure 4

Figure 5.Radial component $\boldsymbol {U}\boldsymbol {\cdot }\boldsymbol {\hat {d}}$ of the relative velocity of the two drops $\boldsymbol {U}$ at $t=0$ as a function of the angle made between the applied field and the line of centres of the two spheres $\boldsymbol {E}^\infty \boldsymbol {\cdot }\boldsymbol {\hat {d}}=\cos \varTheta$. Initial separation is $d=4$. (a) Case $R/S<1$: $R=0.1,\,S=1$ (black), $R=1, S=10$ (blue). At $\varTheta =0$, both electrostatic (DEP) and EHD interactions are attractive. At $\varTheta ={{\rm \pi} }/{2}$, both DEP and EHD are repulsive. (b) Case $R/S>1$: $R=1, S=0.1$ (red), $R=100,\,S=1$ (green). Solid line corresponds to the velocity computed from the theory accounting for transient drop deformation (A9), while the dashed line corresponds to the theory assuming spherical drops (4.7). Points are the numerical simulations.

Figure 5

Figure 6.(a) Tangential component $\boldsymbol {U}\boldsymbol {\cdot }{\boldsymbol {\hat {t}}}$ of the relative velocity of the two drops $\boldsymbol {U}$ at $t=0$ as a function of the angle made between the applied field and the line of centres of the two drops $\boldsymbol {E}^\infty \boldsymbol {\cdot }\boldsymbol {\hat {d}}=\cos \varTheta$. Initial separation is $d=4$. $R=1$, $S=10$ (blue), $R=0.1$, $S=1$ (black), $R=1$, $S=0.1$ (red), $R=100$, $S=1$ (green). Solid line corresponds to the velocity computed from the theory accounting for transient drop deformation (A9), while the dashed line corresponds to the theory assuming spherical drops (4.7). Points are the numerical simulations. (b) Critical value of the angle $\varTheta$ for which the initial radial velocity between two spheres is zero, plotted as a function of the separation distance between the drops. This critical angle separates configurations for which drops attract ($\boldsymbol {U}\boldsymbol {\cdot }\boldsymbol {\hat {d}} <0$) and repel ($\boldsymbol {U}\boldsymbol {\cdot }\boldsymbol {\hat {d}}>0$). Points are the numerical simulations and the lines are added to guide the eye.

Figure 6

Figure 7.The EHDs of a pair of deforming drops with $R=0.1$ and $S=1$ with initial separation $d=4$ and inclinations $\varTheta =0$ (a–c) and $\varTheta ={\rm \pi} /2$ (d–f). Evolution of the centre-to-centre distance (a,d), the radial component of the relative velocity (b,e) and the deformation parameter (c,f). Black dots correspond to the numerical simulations. Red line corresponds to the radial velocity and separation predicted by (4.7) and the blue line is the deformation of an isolated drop calculated from (5.2).

Figure 7

Figure 8.The EHDs of a pair of deforming drops with $R=100$ and $S=1$ with initial separation $d=4$ and inclinations $\varTheta =0$ (a–c) and $\varTheta ={\rm \pi} /2$ (d–f). Evolution of the centre-to-centre distance (a,d), the radial component of the relative velocity (b,e) and the deformation parameter (c,f). Black dots correspond to the numerical simulations. Red line corresponds to the radial velocity and separation predicted by (4.7) and the blue line is the deformation of an isolated drop calculated from (5.2).The insets show the sign reversal of the radial velocity.

Figure 8

Figure 9.Trajectories of two identical drops with (a,e) $R=0.1$, $S=1$, (b,f) $R=1$, $S=10$, (c,g) $R=1$, $S=0.1$ and (d,h) $R=100$, $S=1$. Initially, the separation in all cases is $d=4$ and the angle with the applied field direction is (a,e) $\varTheta =60^{\circ }$, (b,f) $\varTheta =45^{\circ }$, (c,g) $\varTheta =65^{\circ }$ and (d,h) $\varTheta =80^{\circ }$. (e,f,g,h) Trajectories in the $xz$ planes.

Figure 9

Figure 10.Dynamics of a pair of identical drops with initial separation $d=4$ and different angles with the applied field; (a,b) $R=0.1$, $S=1$ (repulsion–attraction, alignment with the field), (c,d) $R=1$, $S=10$ (attraction–repulsion, misalignment with the field), (e,f) $R=1$, $S=0.1$ (attraction–repulsion, alignment perpendicular to the field) and (g,h) $R=100$, $S=1$ (repulsion–attraction, alignment with the field).

Figure 10

Figure 11.Comparison between the transient and steady migration theories with the numerical simulations. Centroid distance (a) and relative radial velocity (b) as a function of time for a pair of identical drops with $R=1$, $S=10$, aligned with the field ($\varTheta =0$) and initial separation $d=4$, $Ca=0.1$. The red line corresponds to the trajectory computed using the steady state velocity (4.7). The transient solution using (A9) with $Ca=0.05$ is given in black and $Ca=0.1$ in blue.

Sorgentone et al. supplementary movie 1

Movie corresponding to Figures 9 and 10 (a)

Download Sorgentone et al. supplementary movie 1(Video)
Video 1.4 MB

Sorgentone et al. supplementary movie 2

Movie corresponding to Figures 9 and 10 (b)

Download Sorgentone et al. supplementary movie 2(Video)
Video 7.8 MB

Sorgentone et al. supplementary movie 3

Movie corresponding to Figures 9 and 10 (c)

Download Sorgentone et al. supplementary movie 3(Video)
Video 3.9 MB

Sorgentone et al. supplementary movie 4

Movie corresponding to Figures 9 and 10 (d)

Download Sorgentone et al. supplementary movie 4(Video)
Video 1.8 MB