Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T06:43:25.327Z Has data issue: false hasContentIssue false

Stability of Poiseuille flow of a Bingham fluid overlying an anisotropic and inhomogeneous porous layer

Published online by Cambridge University Press:  11 July 2019

Sourav Sengupta
Affiliation:
Department of Chemical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
Sirshendu De*
Affiliation:
Department of Chemical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
*
†Email address for correspondence: sde@che.iitkgp.ac.in

Abstract

Modal and non-modal stability analyses are performed for Poiseuille flow of a Bingham fluid overlying an anisotropic and inhomogeneous porous layer saturated with the same fluid. In the case of modal analysis, the resultant Orr–Sommerfeld type eigenvalue problem is formulated and solved via the Chebyshev collocation method, using QZ decomposition. It is found that no unstable eigenvalues are present for the problem, indicating that the flow is linearly stable. Therefore, non-modal analysis is attempted in order to observe the short-time response. For non-modal analysis, the initial value problem is solved, and the response of the system to initial conditions is assessed. The aim is to evaluate the effects on the flow stability of porous layer parameters in terms of depth ratio (ratio of the fluid layer thickness $d$ to the porous layer thickness $d_{m}$), Bingham number, Darcy number and slip coefficient. The effects of anisotropy and inhomogeneity of the porous layer on flow transition are also investigated. In addition, the shapes of the optimal perturbations are constructed. The mechanism of transient growth is explored to comprehend the complex interplay of various factors that lead to intermediate amplifications. The present analysis is perhaps the first attempt at analysing flow stability of viscoplastic fluids over a porous medium, and would possibly lead to better and efficient designing of flow environments involving such flow.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.Flow configuration for plane Poiseuille flow of a Bingham fluid overlying a porous layer.

Figure 1

Figure 2.Validation with literature. (a,b) Comparison with Reddy & Henningson (1993) for (a) streamwise ($\unicode[STIX]{x1D6FC}=1,~\unicode[STIX]{x1D6FD}=0$) and (b) spanwise $(\unicode[STIX]{x1D6FC}=0,~\unicode[STIX]{x1D6FD}=2)$ perturbations. (c) Comparison with Chang et al. (2006) for $Bn=0$. For (a), the boundaries of the $\unicode[STIX]{x1D700}$-pseudospectra from outer to inner are $\unicode[STIX]{x1D700}=10^{-1},~10^{-2},~10^{-3},~10^{-4}$. For (b), they are $\unicode[STIX]{x1D700}=10^{-1},~10^{-2}$. In (a,b), the legend denotes the following: RH-EV, eigenvalues reported by Reddy & Henningson (1993); CS-EV, eigenvalues obtained in the current study; RH-PS, pseudospectra reported by Reddy & Henningson (1993); CS-PS, pseudospectra obtained in the current study.

Figure 2

Figure 3.Variation of $\bar{z}_{01}$ and $\bar{z}_{02}$ with various parameters: (a) Bingham number; (b) depth ratio; (c) slip coefficient; (d) Darcy number; and (e) inhomogeneity factor.

Figure 3

Figure 4.Eigenvalue spectra studying the effect of depth ratio $\hat{d}$: (a) $\hat{d}=0.1$ and (b) $\hat{d}=1$. Dotted lines represent the oblique branches.

Figure 4

Figure 5.Eigenvalue spectra studying the effect of slip parameter $\unicode[STIX]{x1D6FC}_{BJ}$: (a) $\unicode[STIX]{x1D6FC}_{BJ}=0.1$ and (b) $\unicode[STIX]{x1D6FC}_{BJ}=0.4$. Dotted lines represent the oblique branches.

Figure 5

Figure 6.Eigenvalue spectra studying the effect of Darcy number $\unicode[STIX]{x1D6FF}$: (a) $\unicode[STIX]{x1D6FF}=0.0001$ and (b) $\unicode[STIX]{x1D6FF}=0.001$. Dotted lines represent the oblique branches.

Figure 6

Figure 7.Variation of the eigenfunctions with $Bn$: (a) $Bn=0.01$; (b) $Bn=0.05$; (c) $Bn=0.1$; and (d) $Bn=0.2$. Here $u_{m}$ is the eigenfunction corresponding to the domain $-1\leqslant z_{m}\leqslant 0,$ whereas $u$ is the eigenfunction corresponding to the domain $0\leqslant z\leqslant 1.$ Solid lines refer to the real components, while the dashed lines refer to the imaginary components.

Figure 7

Figure 8.Plots of energy Reynolds number versus spanwise wavenumber ($\unicode[STIX]{x1D6FC}=0$) to depict the effects of: (a) depth ratio $\hat{d}$; (b) slip parameter $\unicode[STIX]{x1D6FC}_{BJ}$; (c) Darcy number $\unicode[STIX]{x1D6FF}$; (d) inhomogeneity factor $A_{inh}$; (e) spanwise anisotropy parameter $\unicode[STIX]{x1D709}_{1}$; and (f) normal anisotropy parameter $\unicode[STIX]{x1D709}_{2}$. The numbers in the panels denote the respective values of the parameters. Here $Bn=0.2$ in all cases.

Figure 8

Figure 9.Growth rate curves depicting the effects of: (a) depth ratio $\hat{d}$; (b) slip parameter $\unicode[STIX]{x1D6FC}_{BJ}$; and (c) Darcy number $\unicode[STIX]{x1D6FF}$. The numbers in the panels denote the respective values of the parameters. Here $Re=600$ and $\unicode[STIX]{x1D6FD}=4$ in all cases.

Figure 9

Figure 10.Effect of Bingham number: contours of $G_{max}$ at (a) $Bn=0.02$ and (b) $Bn=0.1$. In (a), dashed lines refer to the studies of Nouar et al. (2007).

Figure 10

Figure 11.Effect of Darcy number: contours of $G_{max}$ at (a) $\unicode[STIX]{x1D6FF}=5\times 10^{-4}$ and (b) $\unicode[STIX]{x1D6FF}=5\times 10^{-3}$.

Figure 11

Figure 12.Effect of depth ratio: contours of $G_{max}$ at (a) $\hat{d}=0.3$ and (b) $\hat{d}=3$.

Figure 12

Figure 13.Effect of slip parameter: contours of $G_{max}$ at (a) $\unicode[STIX]{x1D6FC}_{BJ}=0.05$ and (b) $\unicode[STIX]{x1D6FC}_{BJ}=0.2$.

Figure 13

Figure 14.Optimal perturbation at $x=0$, $Re=600$ for: (a) $\hat{d}=0.3$, $Bn=0.02$; (b) $\hat{d}=3$, $Bn=0.02$; and (c) $\hat{d}=3$, $Bn=0.3$. Contour levels from outer to inner denote the values of $u$ in the following order $[0.1,0.3,0.5,0.7,0.9]$.