Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T07:51:25.763Z Has data issue: false hasContentIssue false

On the energy transport and heat transfer efficiency in radiatively heated particle-laden Rayleigh–Bénard convection

Published online by Cambridge University Press:  14 December 2022

Wenwu Yang
Affiliation:
Shanghai Institute of Applied Mathematics and Mechanics, School of Mechanics and Engineering Science, and Shanghai Key Laboratory of Mechanics in Energy Engineering and Shanghai Frontier Science Center of Mechanoinformatics, Shanghai University, Shanghai 200072, PR China
Zhen-Hua Wan
Affiliation:
Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, PR China
Quan Zhou
Affiliation:
Shanghai Institute of Applied Mathematics and Mechanics, School of Mechanics and Engineering Science, and Shanghai Key Laboratory of Mechanics in Energy Engineering and Shanghai Frontier Science Center of Mechanoinformatics, Shanghai University, Shanghai 200072, PR China
Yuhong Dong*
Affiliation:
Shanghai Institute of Applied Mathematics and Mechanics, School of Mechanics and Engineering Science, and Shanghai Key Laboratory of Mechanics in Energy Engineering and Shanghai Frontier Science Center of Mechanoinformatics, Shanghai University, Shanghai 200072, PR China
*
†Email address for correspondence: dongyh@shu.edu.cn

Abstract

We investigate the energy transport and heat transfer efficiency in turbulent Rayleigh–Bénard (RB) convection laden with radiatively heated inertial particles. Direct numerical simulations combined with the Lagrangian point-particle mode were carried out in the range of density ratio $854.7\le \rho _p/\rho _0 \le 8547$ and radiation intensity $1\le \phi /\phi _{solar}\le 100$ for both two-dimensional (2-D) and three-dimensional (3-D) simulations. The Rayleigh number ranges from $2\times 10^6$ to $10^8$ for 2-D cases, and is $10^7$ for 3-D cases for $Pr=0.71$. It is found that particles with small density ratio that encounter strong radiation significantly alter the flow momentum transport and fluid heat transfer, so the fluid temperature of bulk is remarkably heated. We then derived the theoretical relation of the Nusselt number for interphase heat transfer in the heated particle-laden RB convection, which reveals that the heat transfer difference between the top and bottom plates stems from the interphase heat transfer. We further found that both the interphase heat transfer and the interphase thermal energy transport exhibit universal properties. They are both increased linearly with the reciprocal of the normalized density ratio. Additionally, both the interphase heat transfer and the interphase thermal energy transport increase linearly with the increase of radiation intensity. The growth rates exhibit specific scaling relations versus Rayleigh number and density ratio. Two different regimes distinguished by the critical density ratio, i.e. the exothermic particle regime and the endothermic particle regime, are observed. We further derived the power-law relation of the critical density ratios versus Rayleigh number and radiation intensity, i.e. $\rho _p/\rho _c \sim (\phi /\phi _{solar})^{1/2}\,Ra^{1/3}$, which is in remarkable agreement with the 3-D simulations.

Information

Type
JFM Papers
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Figure 1.Configuration of turbulent RB convection laden with heated particles.

Figure 1

Table 1.Summary of the fluid and particle properties used in the simulation. Here, the heights of the convection cell are 0.07, 0.12 and 0.26 m for $Ra=2\times 10^6$, $10^7$ and $10^8$, respectively.

Figure 2

Table 2.Simulation parameters. For all cases, the Prandtl number is $Pr=0.71$, the Froude number is $Fr_p=0.447$, the mass loading is $\varPhi _m=0.01$, the temperature differential is $\varepsilon =0.1$, and the particle diameter is $d_p=40\,\mathrm {\mu } {\rm m}$.

Figure 3

Figure 2.Typical snapshots of the 2-D instantaneous temperature field (colour) and streamlines (black lines with arrows) for $Ra=10^7$ at $Pr=0.71$, $\varepsilon =0.1$ and $\phi =50\times \phi _{solar}$: (a) single-phase, (b) $\rho _p/\rho _0=2564.1$, (c) $\rho _p/\rho _0=4273.5$, and (d) $\rho _p/\rho _0=8547.0$. (e, f) Instantaneous temperature isosurfaces of 3-D cases with the opacity set to be 50 % and the distribution of particles for $Ra=10^7$ at $Pr=0.71$, $\varepsilon =0.1$ and $\phi =50\times \phi _{solar}$: (e) single-phase, ( f) $\rho _p/\rho _0=2564.1$. Here, 50 % and 1 % of the total number of particles are shown for the 2-D cases and 3-D case, respectively.

Figure 4

Figure 3.Cold-plate Nusselt number $Nu_c$ as a function of density ratio $\rho _p/\rho _0$ for (a) 2-D cases and (b) 3-D cases. Hot-plate Nusselt number $Nu_h$ as a function of density ratio $\rho _p/\rho _0$ for (c) 2-D cases and (d) 3-D cases. For all the cases, $Ra=10^7$, $Pr=0.71$ and $\varepsilon =0.1$. The black dashed lines denote the volume-averaged Nusselt number for 2-D and 3-D single-phase cases.

Figure 5

Figure 4.$Re$ as functions of $\rho _p/\rho _0$ for different values of radiation intensity for (a) 2-D cases and (b) 3-D cases, for $Ra=10^7$ at $Pr=0.71$ and $\varepsilon =0.1$.

Figure 6

Figure 5.$Nu_c / (Nu_h+Nu_q)$ as functions of $\rho _p/\rho _0$ for different values of radiation intensity at $Ra=10^7$ for (a) 2-D cases and (b) 3-D cases.

Figure 7

Figure 6.Plots of $Nu_q$ as a function of $\rho _p/\rho _0$ obtained at various $\phi$ and fixed $Ra=10^7$ for (a) 2-D cases and (b) 3-D cases. Ratio $Nu_q/Nu^*$ as a function of the normalized density ratio $\rho _p/\rho _c$ for (c) all 2-D cases and (d) all 3-D cases; the black solid curves are the best power function fits to the respective data. Here, $\phi _1$, $\phi _2$, $\phi _3$, $\phi _4$ and $\phi _5$ represent the radiation strengths of $\phi _{solar}$, $10\phi _{solar}$, $20\phi _{solar}$, $50\phi _{solar}$ and $100\phi _{solar}$, respectively.

Figure 8

Figure 7.(a) Plots of $Nu_q$ as functions of $\phi /\phi _{solar}$ obtained at various density ratios $\rho _p/\rho _0$ and fixed $Ra=10^7$ for 2-D cases. The solid and dashed lines are eye guides. (b) Fitted slope in the linear relation $Nu_q\sim \alpha (\phi /\phi _{solar})$ as a function of the product $(\rho _p/\rho _0)^{-1.11}\,Ra^{0.65}$ for both 2-D and 3-D cases. The black dashed line is the fitted relation for $\alpha$ versus $(\rho _p/\rho _0)^{-1.11}\,Ra^{0.65}$.

Figure 9

Figure 8.The schematic of the energy process in the RB convection laden with heated particles.

Figure 10

Figure 9.The particle-induced kinetic energy as functions of $\rho _p/\rho _0$ obtained at various $\phi$ and fixed $Ra=10^7$ for (a) 2-D cases and (b) 3-D cases.

Figure 11

Figure 10.The volume-averaged temperature as functions of $\rho _p/\rho _0$ obtained at various $\phi$ and fixed $Ra=10^7$ for (a) 2-D cases and (b) 3-D cases.

Figure 12

Figure 11.The particle-to-fluid thermal energy $\langle Q T\rangle _{V,t}$ as a function of $\rho _p/\rho _0$ obtained at various $\phi$ and fixed $Ra=10^7$ for (a) 2-D cases and (b) 3-D cases. Ratio $\langle Q T\rangle _{V,t}/\langle \varepsilon ^*_T\rangle _{V,t}$ as a function of the normalized density ratio $\rho _p/\rho _c$ for (c) all 2-D cases and (d) all 3-D cases; the black solid curves are the best power function fits to the respective data. Here, $\phi _1$, $\phi _2$, $\phi _3$, $\phi _4$ and $\phi _5$ represent the radiation strengths of $\phi _{solar}$, $10\phi _{solar}$, $20\phi _{solar}$, $50\phi _{solar}$ and $100\phi _{solar}$, respectively.

Figure 13

Figure 12.(a) Plots of $\langle Q T\rangle _{V,t}$ as functions of $\phi /\phi _{solar}$ obtained at various density ratios $\rho _p/\rho _0$ and fixed $Ra=10^7$ for 2-D cases. The solid and dashed lines are eye guides. (b) Fitted slope in the linear relation $1000\langle Q T\rangle _{V,t}\sim \beta (\phi /\phi _{solar})$ as a function of the product $(\rho _p/\rho _0)^{-1.2}\,Ra^{0.18}$ for both 2-D and 3-D cases. The black dashed line is the fitted relation for $\beta$ versus $(\rho _p/\rho _0)^{-1.2}\,Ra^{0.18}$.

Figure 14

Figure 13.(a) The characteristic density ratio $\rho _p/\rho _0$ as a function of the product $(\phi /\phi _{solar})^{3/4}\,Ra^{0.18}$ for all the 2-D cases. (b) The characteristic density ratio $\rho _p/\rho _0$ as a function of the product $(\phi /\phi _{solar})^{0.55}$ for all the 3-D cases. The black dashed lines are the best functions that fit the respective data.