Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T22:49:19.482Z Has data issue: false hasContentIssue false

Theory of the gain characteristics of InGaN/AlGaN QD Lasers

Published online by Cambridge University Press:  13 June 2014

A.D. Andreev
Affiliation:
A.F. Ioffe Physico-Technical Institute of Russian Academy of Sciences, Polytechnicheskaya 26, St.-Petersburg 194021, Russia; E-mail: A.Andreev@surrey.ac.uk
E.P. O’Reilly
Affiliation:
Department of Physics, University of Surrey, Guildford GU2 5XH, UK

Abstract

We present a theoretical analysis of the gain characteristics of InGaN/AlGaN quantum dot (QD) lasers. We calculate the elastic strain distribution caused by the lattice mismatch between the QD and the barrier using an original method which takes into account the hexagonal symmetry of the structure’s elastic properties. The method is based on an analytical derivation of the Fourier transform of the strain tensor. The proposed approach is combined with a plane-wave expansion method to calculate the carrier spectrum and wave functions. The many-body gain of a laser containing a periodic array of QDs is calculated using the Padé approximation. We show that band gap reduction and the Coulomb enhancement of the interband transition probability can significantly modify the gain spectrum in InGaN/AlGaN QD lasers.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig.1Strain tensor dependence on space position for a cylindrical In0.5Ga0.5N/ Al0.1Ga0.9N QD. The QD diameter is 10nm, height is 3nm, lateral period is 25nm, and period along z is 10 nm. Material parameters are from Refs.[12,13].

Figure 1

Fig.2Strain tensor dependence on space position along three different directions for a GaN/AlN pyramidal QD. The QD base is 6×6nm, the height is 3nm, lateral period d// =18nm, and period along z, dz =12nm. Material parameters are from Refs.[12,13].

Figure 2

Figure 3.Spatial variation of the valence band edges, including strain-induced splittings. The structure parameters are the same as in Fig.1; the deformation potentials are assumed equal in the QD and matrix, with D1= 0.7 eV, D2= 2.1 eV, D5= −0.7 eV; the barrier height ratio (without strain) is taken as Ev/Ec =7/3 [16].

Figure 3

Figure 4.Dependence of the hole and electron energy levels on In content in an InxGa1−xN/ Al0.1G0.9N QD array. The energy is measured form the barrier valence (a) or conduction (b) band edge. The QD is cylindrical with a diameter of 5nm and height of 2nm; the periods are d||=10nm and dz=5nm. Valence band parameters are from [17], electron effective masses from [18], and the band offset ratio for unstrained materials is taken as Ev/Ec=7/3 [16].

Figure 4

Figure 5.Calculated gain spectra for an In0.5Ga0.5N/Al0.1Ga0.9N QD structure at T=300 K. Curves 3, 2 and 1 correspond to carrier densities (cm−3) of 4×1018, 6×1018 and 8×1018, respectively. Dashed curves are results without Coulomb enhancement. The QDs are disk-like; the diameter and height are 5nm and 2 nm respectively. The QD array periods are d||=7.5nm and dz=4nm.