Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T10:57:19.983Z Has data issue: false hasContentIssue false

Linear instability of low Reynolds number massively separated flow around three NACA airfoils

Published online by Cambridge University Press:  15 December 2016

W. He*
Affiliation:
School of Aeronautics, Universidad Politécnica de Madrid, Pza. Cardenal Cisneros 3, E28040 Madrid, Spain
R. S. Gioria
Affiliation:
Escola Politécnica, Universidade de São Paulo, Av. Prof. Mello Moraes 2373, 05508-900, São Paulo, Brazil
J. M. Pérez
Affiliation:
School of Aeronautics, Universidad Politécnica de Madrid, Pza. Cardenal Cisneros 3, E28040 Madrid, Spain
V. Theofilis
Affiliation:
School of Engineering, University of Liverpool, The Quadrangle, Browlow Hill, Liverpool L69 3GH, UK
*
†Email address for correspondence: w.he@alumnos.upm.es

Abstract

Two- and three-dimensional modal and non-modal instability mechanisms of steady spanwise-homogeneous laminar separated flow over airfoil profiles, placed at large angles of attack against the oncoming flow, have been investigated using global linear stability theory. Three NACA profiles of distinct thickness and camber were considered in order to assess geometry effects on the laminar–turbulent transition paths discussed. At the conditions investigated, large-scale steady separation occurs, such that Tollmien–Schlichting and cross-flow mechanisms have not been considered. It has been found that the leading modal instability on all three airfoils is that associated with the Kelvin–Helmholtz mechanism, taking the form of the eigenmodes known from analysis of generic bluff bodies. The three-dimensional stationary eigenmode of the two-dimensional laminar separation bubble, associated in earlier analyses with the formation on the airfoil surface of large-scale separation patterns akin to stall cells, is shown to be more strongly damped than the Kelvin–Helmholtz mode at all conditions examined. Non-modal instability analysis reveals the potential of the flows considered to sustain transient growth which becomes stronger with increasing angle of attack and Reynolds number. Optimal initial conditions have been computed and found to be analogous to those on a cascade of low pressure turbine blades. By changing the time horizon of the analysis, these linear optimal initial conditions have been found to evolve into the Kelvin–Helmholtz mode. The time-periodic base flows ensuing linear amplification of the Kelvin–Helmholtz mode have been analysed via temporal Floquet theory. Two amplified modes have been discovered, having characteristic spanwise wavelengths of approximately 0.6 and 2 chord lengths, respectively. Unlike secondary instabilities on the circular cylinder, three-dimensional short-wavelength perturbations are the first to become linearly unstable on all airfoils. Long-wavelength perturbations are quasi-periodic, standing or travelling-wave perturbations that also become unstable as the Reynolds number is further increased. The dominant short-wavelength instability gives rise to spanwise periodic wall-shear patterns, akin to the separation cells encountered on airfoils at low angles of attack and the stall cells found in flight at conditions close to stall. Thickness and camber have quantitative but not qualitative effect on the secondary instability analysis results obtained.

Information

Type
Papers
Copyright
© 2016 Cambridge University Press 
Figure 0

Figure 1.Mesh topologies employed for the base flow computation and instability analyses of the NACA airfoils. (a,b) Finite-element mesh used for the 4415 in the matrix-forming computations based on FreeFEM++; full view (a) and close up near the airfoil (b). (c,d) Same for spectral element mesh used for the NACA 0015 in the time stepping computations employing nektar++ or nek5000; full view (c) and close up near the airfoil (d). (e,f) Detail of the spectral element mesh near the leading edge (e) and the trailing edge (f).

Figure 1

Table 1.Boundary conditions for basic flow $(\bar{u},\bar{v})^{\text{T}}$, direct perturbation $(\hat{u} ,\hat{v},{\hat{w}})^{\text{T}}$ and adjoint perturbation $(\hat{u} ^{+},\hat{v}^{+},{\hat{w}}^{+})^{\text{T}}$ velocity components. D: homogeneous Dirichlet; N: homogeneous Neumann; U: uniform inflow.

Figure 2

Figure 2.Base flow vorticity on the NACA 0015 airfoil at $Re=200,AoA=18^{\circ }$.

Figure 3

Table 2.Convergence history of base flow spanwise vorticity $\bar{\unicode[STIX]{x1D714}}_{z}=-\unicode[STIX]{x2202}\bar{u}/\unicode[STIX]{x2202}y+\unicode[STIX]{x2202}\bar{v}/\unicode[STIX]{x2202}x$ at probe locations, from left to right column, $P1(3.0,0.5),P2(2.0,0.5)$ and close to the centre of the recirculation zone $P3(1.0,0.0)$.

Figure 4

Table 3.Unsteadiness as a function of $Re$ and $AoA$ for three NACA airfoils. S: steady, Us: unsteady base flow.

Figure 5

Table 4.Maximum recirculation, $|\bar{u}_{min}/\bar{u}_{max}\times 100|$ as a function of $Re$ and $AoA$.

Figure 6

Figure 3.Growth rate and Strouhal number of the least-damped modes of the NACA 0015 airfoil at $Re=200,AoA=18^{\circ }$, obtained by the nektar++ time stepping (open symbol) and the FreeFEM++ matrix-forming (full symbol) methodologies.

Figure 7

Figure 4.NACA 0015 at $Re=200,AoA=18^{\circ }$. Amplitude functions of the least-damped travelling (a) and stationary (b) perturbation velocity components at $\unicode[STIX]{x1D6FD}=1$ and $\unicode[STIX]{x1D6FD}=3$, respectively. Normalized by the highest velocity component, from blue $-0.1$ to red 0.1.

Figure 8

Figure 5.Stability analysis of flow around the three airfoils at $AoA=18^{\circ }$. (a) Growth rate of the leading eigenvalue, as function of spanwise wavenumber $\unicode[STIX]{x1D6FD}$. (b) Strouhal number dependence on wavenumber. ○: 0009 at $Re=200$ and 220; ▫: 0015 at $Re=200$ and 230; ♢: 4415 at $Re=150$ and 200. The respective lower $Re$ value results are denoted by open symbols, while those at the respective higher $Re$ value are presented by full symbols.

Figure 9

Figure 6.Stability analysis of flow around the three airfoils at $Re=200,AoA=15^{\circ }$ (open symbols) and $18^{\circ }$ (full symbols). (a) Growth rate of the leading eigenvalue, as function of spanwise wavenumber $\unicode[STIX]{x1D6FD}$. (b) Strouhal number dependence on wavenumber. ○: 0009; ▫: 0015; ♢: 4415.

Figure 10

Figure 7.Optimal gain $G(\unicode[STIX]{x1D70F})$ as a function of wavenumber $\unicode[STIX]{x1D6FD}$ at $Re=200,AoA=18^{\circ }$ for the 0009 (○), 0015 (▫) and 4415 (♢) airfoils. Upper to lower curves: $\unicode[STIX]{x1D6FD}=0,\unicode[STIX]{x03C0}/8,\unicode[STIX]{x03C0}/4,\unicode[STIX]{x03C0}/2,\unicode[STIX]{x03C0}$ and $2\unicode[STIX]{x03C0}$.

Figure 11

Figure 8.Maximum gain, $G(\unicode[STIX]{x1D70F})$ at $\unicode[STIX]{x1D6FD}=0$ (solid line), $\unicode[STIX]{x1D6FD}=\unicode[STIX]{x03C0}/4$ (– – –), $\unicode[STIX]{x1D6FD}=\unicode[STIX]{x03C0}/2$ (— ⋅ —) and $\unicode[STIX]{x1D6FD}=\unicode[STIX]{x03C0}$ ($\cdots \cdots$) for the 0015 airfoil at $Re=200,AoA=18^{\circ }$ at short time horizons in the range $0\leqslant \unicode[STIX]{x1D70F}\leqslant 4$.

Figure 12

Figure 9.Optimal perturbations of the flow past the NACA 0015 airfoil at $Re=200,AoA=18^{\circ },\unicode[STIX]{x1D6FD}=1$. From (a–g), $\unicode[STIX]{x1D70F}=0,10,20,30,40,50$ and 60.

Figure 13

Figure 10.Maximum gain, $G(\unicode[STIX]{x1D70F})$ at $\unicode[STIX]{x1D6FD}=0$ for the 0009 (○), 0015 (▫) and 4415 (♢) airfoils. (a,c,e) Effect of Reynolds number, $Re=150,200$ and 220 at $AoA=18^{\circ }$. (b,d,f) Effect of angle of attack, $AoA=10^{\circ },15^{\circ }$ and $18^{\circ }$ at $Re=200$.

Figure 14

Figure 11.Optimal gain at $Re=200,AoA=18^{\circ },\unicode[STIX]{x1D6FD}=0$ for the 0009 (○), 0015 (▫) and 4415 (♢) airfoils as a function of airfoil thickness and camber.

Figure 15

Figure 12.Dependence of the Strouhal number of the wake behind the 0009 (○), 0015 (▫) and 4415 (♢) airfoils as function on the Reynolds number considered in this work.

Figure 16

Figure 13.Maximum Floquet multiplier, $\unicode[STIX]{x1D707}$, as function of wavenumber $\unicode[STIX]{x1D6FD}$ at $AoA=20^{\circ }$. (a) NACA 0009 at (upper-to-lower) $Re=600,500,442$ and 400. (b) NACA 0015 at (upper-to-lower) $Re=600,500,474$ and 400. (c) NACA 4415 at (upper-to-lower) $Re=600,500,435$ and 400.

Figure 17

Figure 14.Effect of the angle of attack on Floquet multiplier, $\unicode[STIX]{x1D707}$, for the 0009 (○), 0015 (▫) and 4415 (♢) airfoils at $Re=500$ and $AoA=18^{\circ }$ (full symbols) and $20^{\circ }$ (open symbols).

Figure 18

Table 5.Maximum Floquet multiplier, $\unicode[STIX]{x1D707}$, and wavenumber, $\unicode[STIX]{x1D6FD}$, as function of $Re$ and $AoA$ for the three NACA airfoils; dash denotes than no unstable $\unicode[STIX]{x1D707}$ has been found at the respective parameters.

Figure 19

Table 6.Critical conditions for secondary instability of short-wavelength (SW) and long-wavelength (LW) instabilities in the wake of the three airfoils.

Figure 20

Figure 15.Ratio $\unicode[STIX]{x1D703}/(2\unicode[STIX]{x03C0})$ between the secondary and primary periods, $T_{s}$ and $T$ as function of $\unicode[STIX]{x1D6FD}$ at $AoA=20^{\circ }$. In each plot lower to upper set of results correspond to $Re=400,500$ and 600.

Figure 21

Figure 16.Isosurfaces of $\hat{\unicode[STIX]{x1D714}}_{z}$. NACA 4415 airfoil at $Re=500$, $AoA=20^{\circ }$. (a) Long-wavelength instability at $\unicode[STIX]{x1D6FD}=3$. (b) Short-wavelength instability at $\unicode[STIX]{x1D6FD}=11$.

Figure 22

Figure 17.Three-dimensional reconstruction of the results of figure 16. (a) LW instability at $\unicode[STIX]{x1D6FD}=3$. (b) SW instability at $\unicode[STIX]{x1D6FD}=11$.

Figure 23

Figure 18.Wall streamlines of the reconstructed flow field composed of two periods of the $\unicode[STIX]{x1D6FD}=3$ LW eigenmode (a) and the $\unicode[STIX]{x1D6FD}=11$ SW eigenmode (b) perturbation superposed at $\unicode[STIX]{x1D716}=5\times 10^{-4}$ upon the $O(1)$ time-periodic base state.

Figure 24

Table 7.Effect of domain extent on the modal analysis for the basic flow at $Re=220,AoA=18^{\circ }$ and wavenumber $\unicode[STIX]{x1D6FD}=1$.

Figure 25

Figure 19.Dependence of $G(\unicode[STIX]{x1D70F})$ (a) and the maximum singular value $\unicode[STIX]{x1D70E}_{max}$ (b) on the extent of the analysis domain for the 0015 airfoil at $Re=200,AoA=18^{\circ }$.

Figure 26

Figure 20.Comparison of $\unicode[STIX]{x1D707}$ dependence on $\unicode[STIX]{x1D6FD}$, as obtained in the present work by Semtex for the NACA 0012 airfoil at $Re=500,AoA=20^{\circ }$, against literature results (Tsiloufas et al.2009).