Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T19:27:58.055Z Has data issue: false hasContentIssue false

Scanning Tunneling Microscopy Studies of InGaN Growth by Molecular Beam Epitaxy

Published online by Cambridge University Press:  13 June 2014

Huajie Chen
Affiliation:
Department of Physics, Carnegie Mellon University, Pittsburgh, PA 15213
A. R. Smith*
Affiliation:
Department of Physics, Carnegie Mellon University, Pittsburgh, PA 15213
R. M. Feenstra
Affiliation:
Department of Physics, Carnegie Mellon University, Pittsburgh, PA 15213
D. W. Greve
Affiliation:
Department of Electrical and Computer Engineering, Carnegie Mellon University
J. E. Northrup
Affiliation:
Xerox Palo Alto Research Center, 3333 Coyote Hill Road, Palo Alto, CA 94304
*
(a)Present address: Dept. of Physics and Astronomy, Ohio University, Athens, Ohio 45701.

Abstract

InGaN alloys with indium compositions ranging from 0–40% have been grown by molecular beam epitaxy. The dependence of the indium incorporation on growth temperature and group III/group V ratio has been studied. Scanning tunneling microscopy images, interpreted using first-principles theoretical computations, show that there is strong indium surface segregation on InGaN. Based on this surface segregation, a qualitative model is proposed to explain the observed indium incorporation dependence on the growth parameters.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure1.(a) X-ray diffraction 2θ-ω scans for a series of InGaN films grown with a In/(In+Ga) flux ratio of 22%. Indium incorporation,deduced from the x-ray results, is indicated for each film. (b) Summary of the indium incorporation dependence on growth temperature.

Figure 1

Figure2.(a) X-ray diffraction 2θ-ω scans for a series of InGaN films grown with varying In+Ga flux, JIn+Ga, with J0= 1014 cm−2s−1, at 640°C. The In/(In+Ga) flux ratio was kept constant at 36%. (b) Summary of the indium incorporation dependence on (In+Ga) flux.

Figure 2

Figure 3.STM image of the InGaN(000;) surface, obtained from a sample with negligible indium incorporation in the bulk. The image was acquired with sample bias voltage of −0.5 V and tunnel current of 0.075 nA. The grey scale range is 0.6 Å for each terrace. A line cut, taken at the position of the arrows in the figure, is shown on the right side of the figure.

Figure 3

Figure 4.Schematic view of the InGaN surface in an (1;00) projection, showing theoretical results for atomic positions. The surface adlayer consists of 75% In plus 25% Ga, in a 2×2 arrangement.

Figure 4

Figure 5.Schematic view of the InGaN(000;) surface layers, in a (110) projection: layer 1, the metal adatoms residing on top of the metal adlayer; layer 2, metal adlayer on nitrogen; layers 3 and 5, nitrogen atoms; layers 4 and 6, metal atoms.