Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T08:09:18.504Z Has data issue: false hasContentIssue false

Effective boundary conditions for dynamic contact angle hysteresis on chemically inhomogeneous surfaces

Published online by Cambridge University Press:  03 February 2022

Zhen Zhang
Affiliation:
Department of Mathematics, Guangdong Provincial Key Laboratory of Computational Science and Material Design, International Center for Mathematics, National Center for Applied Mathematics (Shenzhen), Southern University of Science and Technology (SUSTech), Shenzhen 518055, PR China
Xianmin Xu*
Affiliation:
NCMIS & LSEC, Institute of Computational Mathematics and Scientific/Engineering Computing, Academy of Mathematics and Systems Science, Beijing 100190, PR ChinaSchool of Mathematical Sciences, University of Chinese Academy of Sciences, Beijing 100049, PR China
*
†Email address for correspondence: xmxu@lsec.cc.ac.cn

Abstract

Recent experiments (Guan et al., Phys. Rev. Lett., vol. 116, issue 6, 2016a, p. 066102; Guan et al., Phys. Rev. E, vol. 94, issue 4, 2016b, p. 042802) showed many interesting phenomena on dynamic contact angle hysteresis while there is still a lack of complete theoretical interpretation. In this work, we study the time averaging of the apparent advancing and receding contact angles on surfaces with periodic chemical patterns. We first derive a new Cox-type boundary condition for the apparent dynamic contact angle on homogeneous surfaces using the Onsager variational principle. Based on this condition, we propose a reduced model for some typical moving contact line problems on chemically inhomogeneous surfaces in two dimensions. Multiscale expansion and averaging techniques are employed to approximate the model for asymptotically small chemical patterns. We obtain a quantitative formula for the averaged dynamic contact angles. It describes explicitly how the advancing and receding contact angles depend on the velocity and the chemical inhomogeneity of the substrate. The formula is a coarse-graining version of the Cox-type boundary condition on inhomogeneous surfaces. Numerical simulations are presented to validate the analytical results. The numerical results also show that the formula characterizes well the complicated behaviour of dynamic contact angle hysteresis observed in the experiments.

Information

Type
JFM Papers
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Figure 1.The region near the moving contact point in different scalings($l\ll D\ll L$).

Figure 1

Figure 2.Comparison between Cox's formula and (2.7). Here, we choose $\lambda =0$ and $\theta _Y=110^{\circ }$. Their difference is small for small capillary number ($Ca\sim O(10^{-2}$)).

Figure 2

Figure 3.Contact point motion in a micro-channel.

Figure 3

Figure 4.Contact line motion on a moving fibre.

Figure 4

Figure 5.Sketch of phase plane analysis for the ODEs (3.8) and (3.9). Here, $\theta _0$ is independent of $\tau$; $y_0$ increases when $\theta _0>\varphi (y_0)$ and $y_0$ decreases when $\theta _0<\varphi (y_0)$.

Figure 5

Figure 6.The effective contact angles on chemically patterned surfaces; (a) $\theta _A=90^{\circ }$, $\theta _B=100^{\circ }$. (b) $\theta _A=45^{\circ }$, $\theta _B=90^{\circ }$.

Figure 6

Figure 7.Comparisons of the averaged formulae by different models.

Figure 7

Figure 8.Receding dynamics for $\varepsilon =0.1, 0.01, 0.001$ and ${v}=0.01$ given $\theta _A=60^{\circ }$ and $\theta _B=120^{\circ }$. (a) Dynamical contact angle starting from $\theta _{init}=150^{\circ }$. (b) The contact line position starting from $\hat {x}_{ct}=0$.

Figure 8

Figure 9.Advancing and receding dynamics for $\varepsilon =0.01$ and ${v}=\pm 0.02,\pm 0.01,\pm 0.005$ given $\theta _A=60^{\circ }$ and $\theta _B=120^{\circ }$. (a) Dynamical contact angle starting from $\theta _{init}=100^{\circ }$. (b) The contact line position starting from $0$. From top to bottom, the solid curves represent the contact angle and contact line motion in the original dynamics. The dashed curves are the corresponding averaged dynamics.

Figure 9

Figure 10.Advancing and receding dynamics for $\varepsilon =0.01$ and ${v}=\pm 0.01$ given $\theta _A=60^{\circ }$ and $\theta _B=120^{\circ }$. (a) Dynamical contact angle starting from $\theta _{init}=100^{\circ }$. (b) The contact line position starting from $0$. From top to bottom, the solid curves represent the contact angle and contact line dynamics with respect to ${v}=-0.01$ and ${v}=0.01$. Black curves show the dynamics in the case of a fibre while blue curves show the dynamics in the case of a microscopic channel. The dashed curves are the corresponding averaged dynamics.

Figure 10

Figure 11.Dependence of CAH on different wall speeds. The dimensional period of the chemical pattern is set to be $\varepsilon =0.05\,\mathrm {\mu }$m. (a) Water–air, $\theta _A=105^{\circ }$, $\theta _B=115^{\circ }$, $\alpha =4\times 10^{5}$ and $\chi =0.9$. (b) Octanol–air, $\theta _A=45^{\circ }$, $\theta _B=60^{\circ }$, $\alpha =1\times 10^{4}$ and $\chi =0.4$. (c) Decane–air, $\theta _A=43^{\circ }$, $\theta _B=63^{\circ }$, $\alpha =5\times 10^{4}$ and $\chi =0.9$. (d) FC77–air, $\theta _A=13^{\circ }$, $\theta _B=14^{\circ }$, $\alpha =1\times 10^{3}$ and $\chi =0.4$. The black, red, green and blue curves represent the results with fibre speeds of $|u_{wall}|=2\,\mathrm {\mu }$m, $5\,\mathrm {\mu }$m, $20\,\mathrm {\mu }$m and $50\,\mathrm {\mu }$m, respectively.

Figure 11

Figure 12.Dependence of CAH on different wall speeds in the presence of noise. The dimensional period of the chemical pattern is set to $\varepsilon =0.05\,\mathrm {\mu }$m. The noise level $\sigma$ is chosen case by case without affecting the effective advancing and receding angles. (a) Water–air, $\theta _A=105^{\circ }$, $\theta _B=115^{\circ }$, $\alpha =4\times 10^{5}$, $\chi =0.9$ and $\sigma =0.1$. (b) Octanol–air, $\theta _A=45^{\circ }$, $\theta _B=60^{\circ }$, $\alpha =1\times 10^{4}$, $\chi =0.4$ and $\sigma =0.02$. (c) Decane–air, $\theta _A=43^{\circ }$, $\theta _B=63^{\circ }$, $\alpha =5\times 10^{4}$, $\chi =0.9$ and $\sigma =0.03$. (d) FC77–air, $\theta _A=13^{\circ }$, $\theta _B=14^{\circ }$, $\alpha =1\times 10^{3}$, $\chi =0.4$ and $\sigma =0.002$. The black, red, green and blue curves represent the results with fibre speeds at $|u_{wall}|=2\,\mathrm {\mu }$m, $5\,\mathrm {\mu }$m, $20\,\mathrm {\mu }$m and $50\,\mathrm {\mu }$m, respectively.

Figure 12

Figure 13.A domain of two-phase flow with a moving contact line.

Figure 13

Figure 14.The wedge region near the moving contact point.

Figure 14

Figure 15.Sketch of the function $f(\varTheta _a)C(\varTheta _a)$ in the case that $v=0.1$, $f$ is given by $\mathcal {F}_1$ in (2.14) and $\varphi$ is given by (3.5) with $\theta _A=60^{\circ }$ and $\theta _B=120^{\circ }$. The red point represents the steady apparent contact angle $\varTheta ^{*}$ closest to $\theta _A$. It is clear that $f(\varTheta _a)C(\varTheta _a)$ is non-decreasing at $\varTheta ^{*}$.