Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T19:49:10.435Z Has data issue: false hasContentIssue false

A Critical Comparison Between MOVPE and MBE Growth of III-V Nitride Semiconductor Materials for Opto-Electronic Device Applications

Published online by Cambridge University Press:  13 June 2014

M.A.L. Johnson
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27603 jan_schetzina@ncsu.eduDepartment of Material Science and Engineering, North Carolina State University, Raleigh, NC 27603
Zhonghai Yu
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27603 jan_schetzina@ncsu.edu
J.D. Brown
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27603 jan_schetzina@ncsu.edu
F.A. Koeck
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27603 jan_schetzina@ncsu.edu
N.A. El-Masry
Affiliation:
Department of Material Science and Engineering, North Carolina State University, Raleigh, NC 27603
H.S. Kong
Affiliation:
Cree Research, Inc., Durham, NC
J.A. Edmond
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27603 jan_schetzina@ncsu.eduDepartment of Material Science and Engineering, North Carolina State University, Raleigh, NC 27603
J.W. Cook Jr.
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27603 jan_schetzina@ncsu.edu
J.F. Schetzina
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27603 jan_schetzina@ncsu.edu

Abstract

A systematic study of the growth and doping of GaN, AlGaN, and InGaN by both molecular beam epitaxy (MBE) and metal-organic vapor phase epitaxy (MOVPE) has been performed. Critical differences between the resulting epitaxy are observed in the p-type doping using magnesium as the acceptor species. MBE growth, using rf-plasma sources to generate the active nitrogen species for growth, has been used for III-Nitride compounds doped either n-type with silicon or p-type with magnesium. Blue and violet light emitting diode (LED) test structures were fabricated. These vertical devices required a relatively high forward current and exhibited high leakage currents. This behavior was attributed to parallel shorting mechanisms along the dislocations in MBE grown layers. For comparison, similar devices were fabricated using a single wafer vertical flow MOVPE reactor and ammonia as the active nitrogen species. MOVPE grown blue LEDs exhibited excellent forward device characteristics and a high reverse breakdown voltage. We feel that the excess hydrogen, which is present on the GaN surface due to the dissociation of ammonia in MOVPE, acts to passivate the dislocations and eliminate parallel shorting for vertical device structures. These findings support the widespread acceptance of MOVPE, rather than MBE, as the epitaxial growth technique of choice for III-V nitride materials used in vertical transport bipolar devices for optoelectronic applications.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1:Scanning Electron Micrographs of as Grown Surfaces: a.) Undoped GaN by MBE; b.) Undoped GaN by MOVPE; c.) Magnesium Doped GaN by MBE; and d.) Magnesium Doped GaN by MOVPE.

Figure 1

Figure 2:MBE Grown InGaN MQW Structure a.) Cross Sectional TEM Image (200 kV) and b.) Room Temperature PL Spectrum

Figure 2

Figure 3:Spectrum for InGaN quantum well LEDs grown by a.) MBE and b.) MOVPE. I-V curve trace for LEDs grown by c.) MBE and d.) MOVPE. Note the substantially lower forward current and reduced breakdown voltage for the MOVPE grown LEDs.