Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T09:12:13.121Z Has data issue: false hasContentIssue false

Melting processes of phase change materials in a horizontally placed rectangular cavity

Published online by Cambridge University Press:  26 October 2022

Min Li
Affiliation:
School of Science, Harbin Institute of Technology, Shenzhen 518055, PR China
Zhenjun Jiao
Affiliation:
School of Science, Harbin Institute of Technology, Shenzhen 518055, PR China
Pan Jia*
Affiliation:
School of Science, Harbin Institute of Technology, Shenzhen 518055, PR China
*
†Email address for correspondence: jiapan@hit.edu.cn

Abstract

This paper revisits the melting process of phase change materials (PCMs) enclosed in a horizontally placed rectangular cavity, with isothermal and adiabatic conditions subjected to the vertical and horizontal walls, respectively. First, numerical simulations based on an improved lattice Boltzmann method are conducted to illustrate and to inform the theoretical modelling. It is shown that, compared with the traditional two-stage conduction–convection melting description, it is more reasonable to include a third stage in terms of the heat transfer behaviour. During the third stage, the remnant solid PCM is located in the corner formed by the cold and bottom walls of the cavity, and an increasing part of the input energy will be transferred directly out of the cavity without compensating for the melting latent heat, thus inducing a continuously decreasing melting rate until the end of the melting process. Then theoretical predictions are derived piecewise for the melted liquid fraction during the entire melting process, and the corresponding transitions between two successive stages are also discussed. The results are validated successfully via the available experimental and numerical data in the literature, and could guide the design and operation of latent heat storage systems.

Information

Type
JFM Papers
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Figure 1.Schematic of PCM melting in a rectangular cavity, and the boundary conditions. The origin of coordinates $O$ lies in the bottom left corner.

Figure 1

Table 1.Summary of the reported correlations for the melted liquid fraction $f_l$ in the literature. Note that the definitions of dimensionless numbers are already unified in this table, as given in (2.6a–d) and (2.7a,b) in § 2.

Figure 2

Table 2.Numerical parameters in the simulations presented in the figures.

Figure 3

Figure 2.Steady pure thermal flow at ${Ra}=2.5 \times 10^4$, ${Pr}=0.02$, ${Ste}=0.01$ and $\gamma =1$. (a) Dimensionless temperature field $\theta$ and streamlines. (b) Local temperature profiles at three altitudes. (c) Average thicknesses of TBLs at the left and right walls.

Figure 4

Figure 3.Melting thermal flow at $Ra = 2.5 \times 10^4$, $Pr = 0.02$, $Ste = 0.01$ and $\gamma = 1$. (a–c) Dimensionless temperature fields and streamlines. (d) Horizontal intersection between solid PCM and the bottom wall ($x_0$) from present simulation (circles), from Rakotondrandisa et al. (2019) (squares), and from Bénard et al. (1985) (triangles). (e) Comparison between average thicknesses of TBLs ($\delta _{T}^l$ and $\delta _{T}^i$) and the average thickness of the melted liquid layer ($s$). Three melting stages are in turn labelled in orange, green and grey in the background. (f) The average Nusselt number $Nu$ obtained from the melting thermal flows performed by Webb & Viskanta (1986) (circles) and Rakotondrandisa et al. (2019) (triangles). The red dashed line is $Nu$ scaling (see (2.10)) developed in the pure thermal flow by Shishkina (2016).

Figure 5

Figure 4.(a) Schematic of the PCM melting during the third stage, where the red line is the melting interface, and its upper part ($y_0 \leq y \leq L_y$) overlaps the uncovered right cold wall. (b) Melting rate of three stages normalised by that of the second stage. In addition to the present simulations (circles and squares), the results from Bénard et al. (1985) (triangles) and Huang et al. (2013) (stars) are also presented.

Figure 6

Figure 5.The predictions are tested against the reported data available with different PCMs: (a) and (b) n-octadecane; (c) gallium; (d) tin; (e) and (f) n-octadecane. In all panels, the orange, green and grey backgrounds are used to denote the first (conduction), the second (convection) and the third (decaying convection) stages, respectively.

Figure 7

Figure 6.The upper limit of $Ste$. Simulations and predictions are performed with ${Ra}=1.0 \times 10^5$, ${Pr}=0.02$ and $\gamma =1.0$: (a) ${Ste}=0.2$, (b) ${Ste}=0.3$, and (c) ${Ste}=0.4$.