Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T21:48:28.907Z Has data issue: false hasContentIssue false

GaN 20-mm Diameter Ingots Grown from Melt-Solution by Seeded Technique

Published online by Cambridge University Press:  13 June 2014

V.A. Sukhoveyev
Affiliation:
Crystal Growth Research Center, 29 Ligovsky Pr., 193036 St. Petersburg, Russian Federation
V.A. Ivantsov
Affiliation:
TDI, Inc., 8660 Dakota Dr., Gaithersburg, MD 20877, U.S.A.Ioffe Institute, 26 Polytechnicheskaya Str., 194021 St. Petersburg, Russian Federation
I.P. Nikitina
Affiliation:
Crystal Growth Research Center, 29 Ligovsky Pr., 193036 St. Petersburg, Russian Federation
A.I. Babanin
Affiliation:
Crystal Growth Research Center, 29 Ligovsky Pr., 193036 St. Petersburg, Russian Federation
A.Y. Polyakov
Affiliation:
Institute of Rare Metals, 5 B.Tolmachevsky, 109017 Moscow, Russian Federation
A.V. Govorkov
Affiliation:
Institute of Rare Metals, 5 B.Tolmachevsky, 109017 Moscow, Russian Federation
N.B. Smirnov
Affiliation:
Institute of Rare Metals, 5 B.Tolmachevsky, 109017 Moscow, Russian Federation
M.G. Mil’vidskii
Affiliation:
Institute of Rare Metals, 5 B.Tolmachevsky, 109017 Moscow, Russian Federation
V.A. Dmitriev
Affiliation:
TDI, Inc., 8660 Dakota Dr., Gaithersburg, MD 20877, U.S.A.

Abstract

In this paper, we describe the seeded growth of ∼20 mm diameter 15 mm long GaN ingots from the melt-solution. This is the first successful attempt to conduct growth of GaN boule-crystals. GaN ingots were grown from Ga-based melt in the temperature range of 800-1000°C at less than 2 atm ambient pressure. Growth was performed at ∼2 mm/hr growth rate. X-ray diffraction revealed polycrystalline structure of the ingots. Homoepitaxial GaN layers were deposited by HVPE technique on the substrates, which were fabricated from the grown GaN ingots.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.As-grown ∼20-mm diameter 15-mm in length GaN ingot (a). The same ingot after etching in HF+HNO3 mixture and sawing in ∼2 mm thick wafers (b).

Figure 1

Figure 2.Auger electron spectrum (left) and secondary ion depth-profile (right) taken from the bulk GaN polycrystalline sample after Ar+-beam sputtevariation of N and Ga signals are likely due to “sputtering effect”.

Figure 2

Figure 3.Secondary electron microscopy image (a), and SEM cathodoluminescence map (b) of the wafer that was sliced from the GaN ingot (RT, 1000x).

Figure 3

Figure 4.Cathodoluminescent spectra taken from a GaN wafer at room temperature (left) and edge CL peak measured at 95 K (right).

Figure 4

Figure 5.Figure 5. X-ray diffraction spectra for GaN substrate (solid line) and deposited homoepitaxial GaN layer (dash-dot line).