Microbes are widely used in agricultural practices to control pests. For instance, the application, utilization and role of Bacillus thuringiensis (Bt) has grown rapidly particularly through biotechnological innovations to incorporate Bt insect-specific toxin genes into crop plants. Current estimates suggest that this sort of genetic modification associated with Bt accounts for US$7·5 billion and in the US alone over 62·5 million hectares are now planted with GM crops. As such the widespread application of this Bt-based biotechnology could lead to unprecedented selection pressures on agricultural pests (Tabashnik et al. Reference Tabashnik, Gassmann, Crowder and Carriere2008). Understanding how agricultural pests may respond to these factors requires a pluralistic approach particularly in delineating the processes that might drive or mitigate the evolution of pest resistance to Bt. While baseline information exists on the mechanisms through which resistance might evolve to Bt-based toxins, the role of additional microbial traits (e.g. antibiotics) on the dynamics of pests is less well developed. Multiple pathogenic traits can influence the dynamics of pathogen transmission and virulence (Bonsall & Raymond Reference Bonsall and Raymond2008) and affect pest evolution.

Here, the population and evolution of an invertebrate pest (host)–pathogen interaction (based around the interaction between Bt and the diamondback model, Plutella xylostella) will be explored in the presence of a non-lethal synergist that the pest must tolerate but which enhances pathogen infectivity. A stage-structured model (formulated as a set of delay-differential equations) will be present to explore how host resistance evolves to different modes of infection. The framework will be extended to explore how host trade-offs in the ability to withstand infection by the pathogen and tolerate the synergist affect the likelihood of coexistence and evolution of polymorphic host strategies.

Further, the epidemiological consequences of pathogen–synergist interactions on host dynamics will be discussed. Through effects on pathogen transmission and host mass gain, investment in tolerating a non-lethal synergist can lead to highly non-linear host dynamics. Again, trade-offs underpin these patterns. Coupling pathogen yield v. speed of kill trade-offs in the presence of a synergist favours pathogens that have faster speeds of kill. This feedback affects the population dynamics leading to stable equilibrium. Conversely, evolutionary changes in tolerance to the synergist can lead to population cycles in the host–pathogen interaction.

The work was supported by The Royal Society and the BBSRC.

When able to propose a well-defined (empirical) model over time for a single response with repeated measures from individuals (e.g. plants), a traditional approach to modelling is the two-stage method (Mead et al. Reference Mead, Curnow and Hasted2003). Here, the same model is fitted to each individual and the estimated parameters (e.g. growth rates) are then analysed using, for example, analysis of variance (ANOVA) to account for the experimental design and assess differences between treatments.

To benefit fully from the underlying variation given all individuals, however, it is often preferable to combine the two stages using random effects (Laird & Ware Reference Laird and Ware1982) in, for example, a random coefficient model (Hand & Crowder Reference Hand and Crowder1996) suitable for linear relationships. Hierarchical non-linear models are investigated by Davidian & Giltinan (Reference Davidian and Giltinan1995). Furthermore, in situations where a non-linear model is not appropriate, smoothing splines may be used (Verbyla et al. Reference Verbyla, Cullis, Kenward and Welham1999).

When there are multiple responses from individuals, taken at the same or different times, the methodology needs further development. A simple approach, developing the method explained by Mead et al. (Reference Mead, Curnow and Hasted2003), is to consider a model for each individual's multiple responses together, before analysis of parameters. An example of this is shown in the analysis of numbers of live, cumulative diseased and cumulative dead leaves of individual oilseed rape plants from four different cultivars over thermal time, deriving from a randomized block design. As the first stage, a parsimonious piecewise linear model is selected which fits the stacked tri-variate repeatedly measured response for each plant. Secondly, the estimated parameters from this model are analysed using residual maximum likelihood (REML) (Patterson & Thompson Reference Patterson and Thompson1971) to account for the inconvenience of missing plants from some blocks and to allow comparison of the cultivars. The models are set up and fitted using the GenStat® (Lawes Agricultural Trust 2008) statistical system.

To provide a more comprehensive modelling of such data which combines the two stages, a method employing intra-individual effects for parameters within the responses is described. In addition, for well-defined non-linear models, if required the correlation between time points can be accounted for using a first-order autoregressive or power-distance process as part of the error structure. A simple example is shown in the modelling of a tri-variate response of contents of three different polysaccharide constituents (Beta-glucans, other glucans and Arabinoxylan) of developing grain sampled from wheat plants, using logistic curves. Although not necessary in this example, when treatments are to be compared, models with and without constraints on intra-individual effects allows the statistical significance of differences to be assessed. This provides a more robust comparison of treatments, tested using the residual variation arising from a single model of all the data rather than the residual variation at the second stage of a two-stage model.

Rothamsted Research receives grant-aided support from the BBSRC.

British agriculture's contribution to the release of greenhouse gas emissions decreased from 0·086 in 1999 to 0·078 in 2005 (http://www.statistics.gov.uk/). However, farmers are under increasing pressure to reduce the carbon equivalent footprint of their practices. In the UK, agriculture contributes 0·67 of the total nitrous oxide (N₂O) emissions and 0·37 of methane (CH₄). The measurements of carbon (C) storage in soils and C exchange can be made; however, they are technically demanding and difficult to repeat at a wide range of sites. There is a need for the development and deployment of simple tools to measure carbon footprints from land-based industries (Anon 2007). In this study, two contrasting models have been used to assess farm-gate greenhouse gas emissions, as carbon equivalents (Ceq), on a livestock farm in the north-east of Scotland. Environmental and management data were obtained from a mixed arable and livestock farm rearing cattle. The stocking rate is approximately one cow per ha and the cattle are fed on home-produced feed. The farmer also summer grazes sheep. Approximately 0·55 of the farm is rotational grass and cereal. The average nitrogen (N) fertilizer application rate is 169 kg N/ha and the 50 kg N/ha is applied as slurry or manure. The remainder of the farm is either natural grassland or natural grassland and woodland. The first approach followed the 2006 IPCC Guidelines for National Inventories (IPCC Reference Eggleston, Buendia, Miwa, Ngara and Tanabe2006) and was based on the tier 1 methodology. The second approach was the dynamic and deterministic nutrient cycling model DNDC (DeNitrificationDeComposition) (Li et al. Reference Li, Frolking and Frolkin1992, Reference Li, Farahbakhshazad, Jaynes, Dinnes, Salas and Mclaughlin2006), which has been extensively applied across agro-ecosystems around the world and is widely acknowledged as a state-of-the-art model for use assessing N and C in arable and grassland farming systems. It calculates the daily changes in pool sizes and exchange of C and N from the plant and soil systems, and hence describes the flows of carbon dioxide (CO₂), N₂O and CH₄. The enteric emissions were calculated using IPCC tier 1 methodology. The overall C budget for the farm in 2006 estimated by IPCC tier 1 was negative, with a removal from the atmosphere of 44 kg Ceq/ha/yr. This negative value resulted from a large amount of C uptake by the vegetation offsetting CO₂, N₂O and CH₄ releases. Both IPCC and DNDC predicted a significant C uptake by vegetation of 932 and 1161 kg Ceq/ha/yr, respectively. Emissions of N₂O estimated by DNDC were larger than those by IPCC, resulting in a lower net C uptake of 694 kg C/ha/yr by DNDC, and 823 kg C/ha/yr by IPCC. Less than 0·10 of emissions were associated with on farm use of fuel, with land use and animals contributing to the remainder. Improved management of farm animals and fertilizer N use are likely to be the best options for lowering still further the Ceq emissions from the farm.

We are grateful to Mr A. Adams for the provision of farm data and to QMS for funding SAC staff to collate the farm data and produce the DNDC model output reported here.

A large number of models have been developed over the last few decades in agricultural and ecological research. However, it is very difficult to obtain access to these models: the source code may no longer be available; their authors may have moved on; the documentation may be poor or missing, or the models may require compilers which no longer exist. A number of model catalogues have been developed, e.g. CAMASE (Plentinger & Penning de Vries Reference Plentinger and Penning De Vries1996) and REM (Ernst et al. Reference Ernst, Benz, Hoch, Sinowski and Gayler1997), but these simply present information about the model, rather than providing access to the model itself.

The BBSRC-funded PlaSMo (Plant Systems Biology Modelling) project aims to address this problem by converting legacy plant and crop models into a standard, XML-based format which is then accessible through a web portal. This involves re-implementing the models in Simile (Muetzelfeldt & Massheder Reference Muetzelfeldt and Massheder2003), a visual modelling environment specifically developed for ecological and environmental modelling. The models are then saved in Simile's XML-based model-representation format and uploaded to the web portal, along with model metadata (such as author and publications) describing the model. Users can then search for particular models, view a model in a variety of formats using tools provided on the portal, run the models in a web browser, or download the models into Simile.

PlaSMo currently has a particular focus on plant models because it arose out of a recognition by the plant systems biology community that such models provide a valuable resource for the community as they scale up from the cell to the whole organism (GARNet 2006), with the emergent properties of the cell-level models appearing as parameters for the organism-level model. For this reason, we aim to integrate closely with the Systems Biology Markup Language (SBML, http://www.sbml.org), an XML-based language widely used in the systems biology community for modelling biological pathways at the cell level. However, the design of the web approach itself is not at all specific to plant models and we envisage that it will rapidly grow to include models from other areas, such as epidemiology, animal husbandry, soil biology and ecology. We also expect that as the number of models grows, other groups will develop tools for building, displaying and simulating the behaviour of the models.

This paper discusses the use of the SIMS_DAIRY modelling framework (del Prado & Scholefield Reference Del Prado and Scholefield2008) to analyse the impact on greenhouse gas (GHG) emissions after setting up a trajectory to achieve sustainability in a typical dairy farm in the UK.

The whole-systems response was assessed through evaluation against a baseline dairy farm scenario. A trajectory including 13 farm improvements (steps) towards sustainability was defined. The effects of implementing this trajectory (best sequence of management improvement steps) on typical UK dairy systems on the GHG emissions and sustainability-associated side-effects were simulated and analysed. Each successive step incorporated all previous steps and the SIMS_DAIRY optimization procedure, for most parameters, was set to adjust the hectares required for forage production. Farm changes at each step included measures at the management level and at the genetic level of plants and animals. Desirable targets for pollution compared with baseline farms were set. These included, for example, compliance with EU Nitrate Directive (<11·3 mg N/l in the leachate) and GHG reduction from baseline according to Kyoto protocol targets (15%), both individually and as a whole. Thresholds were also defined for other sustainability indices, for example, biodiversity.

Desired targets for pollution sustainability were generally met on the last step. Targets related to potential eutrophication were met in all cases for NO₃^– leaching, except for some extended systems in drier areas. Those targets related to potential impacts on the climate change by production of GHG were met in all cases for methane (CH₄) and in almost all cases for nitrous oxide (N₂O), except for some fully housed systems. Farms on heavier soils generally showed greater scope to reduce N₂O emissions from soils than those on lighter ones. However, lighter soils resulted in much lower absolute values of N₂O losses per hectare than heavier soils. Although changes in the diet were sufficient in all cases to reduce CH₄ losses to the targeted values, these reductions were in all cases more modest than those predicted for N₂O emissions. Therefore, measures to reduce GHG output should be prioritized towards those targeted at limiting N₂O emissions. Ammonia losses were generally reduced through management and NO_x losses reduced through improvements in the silage and fertilizer management. Milk quality targets were met in almost all cases. Landscape, biodiversity and soil quality targets were seldom met and the scope for animal welfare and net farm income targets to be met varied with and within systems and sites.

BulkDry is an interactive simulation of near-ambient, deep-bed drying of wheat and barley intended for use as a knowledge transfer tool to communicate the principles of drier management. It was released in its present form in 2007, based on similar tools originally developed in 1984, and has been used successfully at several events. It is based on an equilibrium model of grain drying (Morey et al. Reference Morey, Cloud, Gustafson and Petersen1979). The model considers the grain bed as a set of 15 homogeneous horizontal layers through which air is blown upwards. Within each 1 h time step it is assumed that the air passing through a layer will reach a moisture and temperature equilibrium with the grain in the layer, so that the air leaving the bed is at the equilibrium relative humidity (RH) corresponding to the moisture content of the grain. The equilibrium is determined by empirically derived isotherms for adsorption and desorption. The model is driven by hourly weather data, and a variety of control strategies may be employed, including RH set points for the fan and an optional heater or dehumidifier. It includes an empirical model of the risk of spoilage (mycotoxin formation): the grain must reach the target moisture content before spoilage occurs.

Two new programs were developed based on the same model. BulkDry for Oilseed Rape was a straightforward reparameterization for a different crop. The main changes were to the isotherms and the relationship between pressure and ventilation rate. BulkCool extended the model to cooling of cereals or rapeseed following drying in order to prevent the reproduction of invertebrate pests. Although the physical model was essentially the same, systematic errors were found compared with experimental data and a more comprehensive model, known as Storedry (Sharp Reference Sharp1984), resulting in cooling times to reach 0·10 of the initial difference from ambient that were up to 80% greater. Two modifications were needed. First, sensible heat exchange was not required in the drying model, because latent heat transfer is dominant during drying. However, there is little or no evaporation during the cooling of dry grain, so sensible heat transfer dominates and was added to the model. Second, due to the slow rates of change, the number of layers had to be increased from 15 to 100. With these changes the cooling times were identical to Storedry. These two models are being released in spring 2009 and all three will be freely available from the Home-Grown Cereals Authority (HGCA) web site.

This work was funded by HGCA.

The rapid genetic changes occurring in pest and pathogen species have disrupted the balance between the introduction of novel pesticides/fungicides and the development of insensitivity to these products by pests/pathogens (Kiyosawa Reference Kiyosawa1982; Nauen & Denholm Reference Nauen and Denholm2005). For that reason and environmental considerations the emphasis of pathogen control has shifted to crop resistance breeding. The key problem of using resistant cultivars is that resistance genes exert selection pressures on the pathogen to evolve virulent strains, leading to the often rapid resistance breakdown (Sprague et al. Reference Sprague, Marcroft, Hayden and Howlett2006). To increase the durability of cultivar resistance, several deployment strategies for resistance genes have been considered (McDonald & Linde Reference McDonald and Linde2002 a). Pyramiding of multiple genes into a single cultivar is often advocated as a deployment strategy to increase the durability of resistance. However, empirical evidence for it working in practice is limited and often inconclusive; therefore, there is a requirement for theoretical underpinning (McDonald & Linde Reference McDonald and Linde2002 b). The durability of resistance obtained for pyramided deployment was investigated under the assumption of a fitness cost incurred by the pathogen associated with overcoming resistance genes. For comparison, sequential deployment of resistance genes was also considered. As yield gain is the key objective of resistance gene deployment, the additional yield obtained from deploying resistance genes as the measure for durability of resistance was utilized (van den Bosch & Gilligan Reference van den Bosch and Gilligan2003). Although the work is of a generic nature, the terminology relating to plant pathogen systems is used and an epidemiological model describing a pathosystem into which resistance genes are introduced is developed. A single strain of an avirulent pathogen was assumed and that virulence develops through mutation and migration of virulence from outside the pathosystem. It was shown that, when virulence is present in the genetic background of the pathogen population, pyramiding is often not the best strategy to maximize the yield gain from deploying resistance genes. It was also shown, when the resistance genes are deployed sequentially, that selection and mutation affect the genetic composition of the pathogen population with unexpected consequences for the relation between yield gain and the fraction of fields planted with the resistant cultivar. Additionally, it was shown that the difference between the cost of virulence of pathogen strains with one virulence factor and strains with two virulence factors determines whether pyramided or sequential deployment generates the largest yield gain.

Agriculture in the Ebonyi State region of Nigeria consists of a large number of small farms growing a diverse range of crops. Available data on crop yields and prices show that both vary considerably over time, and management of this instability is an important concern of farmers. However, the value of these data is limited: the number of observations may be small, the scale may be national rather than local and the data may not cover the full range of crops grown by farmers. At the local level, survey information (e.g. Itumoh Reference Itumoh2008) can potentially give a better indication of the variability of crop returns; however, farmers are often unable to give accurate estimates of yield. Alternatively, crop models can be used to generate yields under simulated weather conditions. Again, data are often a limiting factor: e.g. calibration data for tropical crops are often scarce.

In data-limited situations, Hardaker et al. (Reference Hardaker, Huirne, Anderson and Lien2004) recommend using triangular distributions, requiring maximum, minimum and modal data values. For Ebonyi State, these were derived from a farm survey conducted in 2004 for cassava, maize, rice, yam and bambara groundnut. For each crop, 10 years of real-terms price data were obtained from the Food and Agriculture Organization. Prices and yields were assumed to be independent; however, a strong positive correlation between movements in prices over time for the five crops exists. To explore crop-price linkages, a baseline crop price (rice, P _r) was used to estimate individual crop prices (P _c*) on the basis of known crop prices (P _c) and the correlation (r _c) between each P _c and P _r:

where PTD _r is the randomly generated real price of rice, PTD _c is the randomly generated real price of crop c, and PTD _r and PTD _c are generated from the relevant triangular distributions. One hundred draws were used to generate 100 estimates of P _c* and these were used with yield estimates generated from the relevant yield triangular distributions to give 100 estimates of gross margin variability (variable costs were assumed to remain constant). As an application of the approach, covariance matrices were generated for use in a quadratic programming model to produce expected profit and variability of profit frontiers for farms in Ebonyi province. The frontiers show the trade-off between profit and variability of profit, a major source of risk to small-scale farmers, and help to assess the extent to which price and yield variability can be managed through crop diversification.

Information on the spatial distribution of an epidemic is crucial for effective disease management. For example, a disease map can facilitate the deployment of spatially targeted control measures such as field spray applications in precision agriculture (Fleischer et al. Reference Fleischer, Blom and Weisz1999) or host removals during a disease eradication programme (Ferguson et al. Reference Ferguson, Donnelly and Anderson2001; Gottwald Reference Gottwald2007). Due to economic and logistical constraints it is not normally possible to conduct a complete census of an area from which to construct a disease map. Therefore, an incomplete sample is taken and inferences of disease status at un-sampled locations must be made. In plant disease epidemiology this has frequently been done using spatial interpolation methods, such as kriging, from the field of geostatistics (Nelson et al. Reference Nelson, Orum, Jamie-Garcia and Nadeem1999). These methods originate in mining and mineral exploration and work by estimating a continuous surface map from a set of point samples. This is a useful approximation when the variate to be mapped is continuous in space. However, in epidemiological applications the host distribution is often non-contiguous and heterogeneous and this can have a significant influence on the spatial distribution of disease. For example, the transmission of many diseases is constrained to neighbouring areas, therefore, distinct patches of hosts can be connected by the existence of several smaller host patches (i.e. a stepping stone effect). Here we introduce an epidemiologically motivated optimization procedure which estimates the probability of disease at un-sampled host locations by incorporating information on the host distribution and characteristics of local pathogen transmission. We demonstrate this generic method using two examples from plant disease epidemiology, citrus canker and Huanglongbing (Gottwald Reference Gottwald2007), and show how the accuracy of the estimated maps relates to sample size and sample placement.

Rothamsted Research receives support from the Biotechnology and Biological Sciences Research Council.

Analysis of data from variety evaluation trials collected over many years represents a valuable resource for the evaluation of interaction between genotype and environmental variables. For example, analyses published for such data, collected in the period 1947–78 (Silvey Reference Silvey1978, Reference Silvey1981, Reference Silvey1986), showed genetic gain (independent of substantial gains due to changes in husbandry) in wheat, barley and oats to be 65, 32 and 25%, respectively. This analysis has now been extended for wheat and barley to include all years up to 2007 and analysed by mixed-effect models using computational power that was not available to Silvey who was limited to using 5-year rolling means. The advances in statistical methods and computing power mean that it is now possible to analyse a whole series of trials from over 60 years as a single dataset to derive estimates of relative variety performance. For winter wheat, this encompasses about 53 000 data points from 3600 trials for over 400 varieties tested in a minimum of 3 years. Aside from the difference in scale, the analytical methods are the same as those used to derive recommended lists by analysing 3- to 5-year datasets. NIAB have then followed Silvey's approach in relating trial performance to national yields by using historical records held by DEFRA, coupled with NIAB seed certification figures (which give an estimate of the national variety mix in any year). For wheat and barley, we are able to demonstrate that the contribution to yield increase has, in the last 25 years, been almost exclusively from improved genotype. For the period 1982–2007, 0·93 of the increase in winter wheat yields are due to variety, the figures for spring and winter barley are 0·87 and 0·92 respectively. This reflects optimization of agronomic practice in the 1980s and 1990s and the more recent trend to targeted application of agrochemicals aimed at maximizing gross margin and minimizing environmental impact. A complementary analysis of trials data for some non-cereal species (oilseed rape, sugar beet and maize) provides an interesting contrast to the cereals. All the crops analysed show a positive influence of variety on trial yields over the last 25 years. The effect of non-genetic factors on oilseed rape trial yields has declined over the period, whereas for sugar beet and maize trials, yield increases can be attributed to a combination of variety and non-genetic factors.

A central element of mixed effects modelling is the prediction of performance of varieties in years and locations where they were never sown. In this context, we believe our database and modelling methodology could be extended to include meteorological data for the specific sites and years where the trials were grown. With these variables included in the model we would be able to estimate the future impact of climate change on agricultural production and identify historic varieties best suited to anticipated climatic change. Such information could inform future breeding strategies and might also guide farmer's choice of variety today.

In conclusion, we show that improved genotype has been almost the only source of agronomic gain in the past 20 years for wheat and barley and that historic data have the potential to help breeders and farmers to anticipate and respond to the new genotype×climate interactions we predict in the next 50 years.

The evolutionary responses of plant pathogens to the use of fungicides and/or resistant crops have been intensively studied. The selection pressures imposed on the evolution of a pathogen's life-cycle characteristics by other disease management strategies or changes in the environment have been studied much less frequently. Such adaptations can, however, have a major effect on epidemic dynamics and therewith host performance. This presentation aims to give an overview of theoretical and experimental approaches currently being undertaken in a BBSRC–INRA collaboration aimed at understanding the effect of discontinuous host growth on the evolution of pathogen life cycle characteristics.

Many natural and agricultural ecosystems are characterized by periodic host absence. These periods of host absence are often relatively large and are known to have profound effects on the dynamics of parasite populations (Gubbins & Gilligan Reference Gubbins and Gilligan1997; Caswell Reference Caswell2001; Altizer et al. Reference Altizer, Dobson, Hosseini, Hudson, Pascual and Rohani2006; Olinky et al. Reference Olinky, Huppert and Stone2008). However, little is known about the selection pressures such seasonality might impose on a parasite's life-cycle characteristics.

We have shown that periods of host absence can indeed put a strong selection pressure on the pathogen and that the effect a period of host absence has is different for airborne pathogens as compared to soil-borne pathogens. The key findings are evidence of a trade-off between latent period and sporulation capacity for Puccinia triticina, i.e. leaf rust of wheat; evidence of a trade-off between infection efficiency and inoculum survival in the absence of the host for Gaeumannomycus graminis, i.e. take-all of wheat; seasonal trade-off in combination with a model for discontinuous host growth cannot explain the coexistence of two genetically distinct phenotypes of take-all of wheat and increased periods of host absence seem to select for a higher reproductive capacity in airborne pathogens, yet a lower reproductive capacity in soil-borne pathogens.

Rothamsted Research receives support from the Biotechnology and Biological Sciences Research Council of the United Kingdom. This work was part of an INRA/BBSRC-funded project entitled ‘Epidemiological and evolutionary models for invasion and persistence of disease’.

As a foundation for further research to develop new ruminant nutrition regimens for simultaneously reducing methane emissions and nitrogen excretion in growing and lactating ruminants, a meta-analysis of existing data was undertaken. Measurements of energy and/or nitrogen balance obtained using respiration calorimetry and digestion trials were accumulated into a database for meta-analysis of effects of key parameters on both methane and nitrogen excretion in growing and lactating beef cattle and lactating and non-lactating dairy cows. An existing database of individual measurements of energy and nitrogen balance from the University of Reading, which included measurements of methane and nitrogen excretion, was updated and expanded using more recent data from Reading and existing data from other laboratories. Additional data were obtained from the USA, Wales and the Netherlands, giving a total of 1819 individual measurements (1335 records of methane excretion). A multivariate analysis was conducted using the Mixed Models procedures of SAS (SAS Institute Inc., Cary, NC) and linear regression models as described by St-Pierre (Reference St-Pierre2001). Adjustments were made for variance associated with location and trial effects, to determine the most important dietary factors that influence methane and nitrogen excretion, based on both linear and non-linear models. As observed in previous studies with smaller databases (Mills et al. Reference Mills, Kebreab, Yates, Crompton, Cammell, Dhanoa, Agnew and France2003), total feed dry matter intake (DMI) has an overriding effect on the amount of methane produced by cattle, across a broad range of diet types and productive states. The prediction of methane production is improved only slightly on the basis of digestible energy, which is an indicator of the amount of organic matter fermented in the diet fed. In addition to DMI, the concentration of starch relative to that of acid detergent fibre (ADF) had a significant effect on the amount of methane produced, with increasing ratios of starch to ADF causing a decline in the release of methane per unit of DMI. However, the effect of increasing amounts of starch relative to fibre was curvilinear and less pronounced at higher levels of starch feeding typical of rations fed to finishing beef cattle in the USA. Lower producing animals tend to lose more feed energy as methane per unit of milk produced. This is especially true at very low levels of milk yield, as observed in lactating beef cows. Therefore, the research demonstrates that a static estimate of the proportion of feed energy lost as methane is inappropriate. However, a reliable estimate of methane emissions can be obtained for both beef and dairy animals if information on DMI is available.

Nitrogen intake is the principal driver of nitrogen excretion, although the level of intake with respect to requirement modifies the response. As nitrogen intake relative to requirement increases, the proportion of total nitrogen excreted increases at a slower rate than nitrogen excreted as urinary nitrogen. In contrast to the results of Castillo et al. (Reference Castillo, Kebreab, Beever, Barbi, Sutton, Kirby and France2001) the increase in urinary nitrogen excretion remained linear with increasing nitrogen intake. In this large population of measurements, nitrogen excretion was relatively unaffected by the balance between structural (fibre) and non-structural (starch) carbohydrate. On average, lower producing animals excrete more nitrogen to the environment per unit of nitrogen intake, but there is much variation in nitrogen excretion relative to milk yield. Nitrogen excretion in urine and faeces can be estimated based on nitrogen intake alone.

The financial support of the Milk Development Council of England Wales (MDC 07/04/A) and the UK Department for Environment Food and Rural Affairs (DEFRA AC0209) are gratefully acknowledged.