Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T03:19:03.569Z Has data issue: false hasContentIssue false

Rapid distortion theory of turbulent flow around a porous cylinder

Published online by Cambridge University Press:  11 March 2021

R. Zamponi*
Affiliation:
von Karman Institute for Fluid Dynamics, Waterloosest. 72, 1640 Sint-Genesius-Rode, Belgium
S. Moreau
Affiliation:
Université de Sherbrooke, Boul. de l'Université 2500, J1K 2R1 Sherbrooke, QC, Canada
C. Schram
Affiliation:
von Karman Institute for Fluid Dynamics, Waterloosest. 72, 1640 Sint-Genesius-Rode, Belgium
*
†Email address for correspondence: riccardo.zamponi@vki.ac.be

Abstract

The distortion of homogeneous isotropic turbulence interacting with a porous cylinder is calculated by means of the rapid distortion theory (RDT). The porous treatment, characterised by a constant static permeability, is modelled as an impedance boundary condition accounting for the Darcy's flow within the body. The RDT algorithm is first validated through comparisons with published velocity measurements in the stagnation region of an impermeable cylinder placed downstream of a turbulence grid. Subsequently, the impact of porosity on the velocity field is investigated through the analysis of the one-dimensional spectra at different locations near the body and the velocity variance along the stagnation streamline. The porous surface affects the incoming turbulence distortion near the cylinder by reducing the blocking effect of the body and by altering the vorticity deformation caused by the mean flow. The former leads to an attenuation of the one-dimensional velocity spectrum in the low-frequency range, whereas the latter results in an amplification of the high-frequency components. This trend is found to be strongly dependent on the turbulence scale and influences the evolution of the velocity fluctuations in the stagnation region. The porous RDT is finally adapted to model the turbulence distortion in the vicinity of the leading edge of a NACA-0024 profile fitted with melamine foam. The good agreement between the calculations and the experimental results demonstrates that the present methodology can improve the understanding of the physical mechanisms involved in the aerofoil-turbulence interaction noise reduction through porosity and be instrumental in designing such passive noise-mitigation treatments.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Scheme of the regions of flow surrounding a bluff body and the relevant dimensions represented by the body characteristic length and the scale of the incident turbulence. The different regions characterising the flow field and the spatial reference systems considered in the present study are indicated. Adapted from Hunt (1973).

Figure 1

Figure 2.Pattern of the potential flow around a solid cylinder computed with the potential flow solution.

Figure 2

Figure 3.Variation of $K$ over $\theta$ for a porous cylinder with (a) $K^\star = {0.1}$ and (b) $K^\star = {0.2}$. The solid and dashed lines indicate the original and regularised $K$, respectively, whilst the grey areas denote the $\theta$ range at which the regularisation procedure is applied.

Figure 3

Figure 4.Pattern of the mean flow around a porous cylinder with (a) $K^\star = {0.1}$ and (b) $K^\star = {0.2}$ computed using an impedance boundary condition approach and following Power et al. (1984).

Figure 4

Figure 5.Domain for the computation of the velocity distortion tensor. The dots define the calculation locations, whilst the solid lines represent the mean-flow pattern for the case of a solid cylinder.

Figure 5

Table 1.Properties of the Fourier series of $\varOmega _{11}^{cn}$ for a solid ($K^\star = {0}$) and porous ($K^\star = {0.2}$) cylinder. Here $( \varOmega _{11}^{cn} )_{{max}}$ is the largest term of the series, $n_{{max}}$ is the Fourier mode at which $\varOmega _{11}^{cn}$ is maximum and $\lambda _c = |(\varOmega _{11}^{cn})_{{max}}|/|\varOmega _{11}^{c100}|$.

Figure 6

Figure 6.Comparison between the RDT spectra of the streamwise (a,c,e) and upwash (b,d,f) velocity components and the measurements of Britter et al. (1979) at two locations along the stagnation streamline for (a,b) $L_x/a = {9.09}$, (c,d) $L_x/a = {2.86}$ and (e,f) $L_x/a = {1.56}$. The undisturbed spectra computed with the von Kármán model are also reported.

Figure 7

Figure 7.Lines of constant $\varDelta _T$ for a solid ($K^\star = {0}$) and porous cylinder characterised by (a) $K^\star = {0.1}$ and (b) $K^\star = {0.2}$.

Figure 8

Figure 8.Solid and porous ($K^{\star } = {0.1}$ and $K^{\star } = {0.2}$) spectra of the streamwise (a,c,e) and upwash (b,d,f) velocity components computed at $x = {-1.1}$ and $\theta = {\rm \pi}$ for (a,b) $L_x/a = {9.09}$, (c,d) $L_x/a = {2.86}$ and (e,f) $L_x/a = {1.56}$. The undisturbed spectra are shown as opaque lines.

Figure 9

Figure 9.Solid and porous ($K^{\star } = {0.1}$ and $K^{\star } = {0.2}$) spectra of the streamwise (a,c,e) and upwash (b,d,f) velocity components computed at $x = {-1.1}$ and $\theta = 5{\rm \pi} /6$ for (a,b) $L_x/a = {9.09}$, (c,d) $L_x/a = {2.86}$ and (e,f) $L_x/a = {1.56}$. The undisturbed spectra are shown as opaque lines.

Figure 10

Figure 10.Evolution of different components of $\boldsymbol{\mathsf{M}}$ along the stagnation streamline computed for (a,b) $\kappa _1 = \kappa _2 = \kappa _3 = {0.1}$ and (c,d) $\kappa _1 = \kappa _2 = \kappa _3 = {1}$ and for a solid ($K^{\star } = {0}$) and porous ($K^{\star } = {0.2}$) cylinder.

Figure 11

Figure 11.Solid and porous ($K^{\star } = {0.1}$ and $K^{\star } = {0.2}$) variances of the streamwise (a,c,e) and upwash (b,d,f) velocity components computed along the stagnation streamline for (a,b) $L_x/a = {9.09}$, (c,d) $L_x/a = {2.86}$ and (e,f) $L_x/a = {1.56}$, and normalised by their upstream values. The asymptotic case for $L_x/a \rightarrow \infty$ is also reported.

Figure 12

Figure 12.(a) Representation of the porous NACA-0024 profile featuring the solid middle-plane that prevents the cross-flow between pressure and suction side, the hard-plastic exo-skeleton that preserves the aerofoil shape integrity and the metallic wire mesh that ensures the desired surface roughness. (b) Acoustic beamforming results exhibiting the sound pressure levels radiated by a solid and porous aerofoil configuration expressed in one-third octave bands. The wavenumber vector is made dimensionless by the aerofoil leading-edge radius. Credits: Zamponi et al. (2020).

Figure 13

Figure 13.(a) Solid and porous ($K^{\star } = {0.22}$) spectra of the upwash velocity component computed at $x = {-1.05}$ for $L_x/a = {4.2}$. The RDT calculations are compared with the hot-wire anemometry measurements performed by Zamponi et al. (2020). (b) Solid and porous ($K^{\star } = {0.22}$) normalised variances of the streamwise and upwash velocity components computed along the stagnation streamline for $L_x/a = {4.2}$.