Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T18:17:34.489Z Has data issue: false hasContentIssue false

Comparative Growth of AlN on Singular and Off-Axis 6H and 4H-SiC by MOCVD

Published online by Cambridge University Press:  13 June 2014

S. Wilson
Affiliation:
Materials Science Research Center of Excellence, School of Engineering, Howard University, Washington, DC 20059
C. S. Dickens
Affiliation:
Materials Science Research Center of Excellence, School of Engineering, Howard University, Washington, DC 20059
J. Griffin
Affiliation:
Materials Science Research Center of Excellence, School of Engineering, Howard University, Washington, DC 20059
M. G. Spencer
Affiliation:
Materials Science Research Center of Excellence, School of Engineering, Howard University, Washington, DC 20059

Abstract

A comparison study of the growth of aluminum nitride (AlN) single crystal epitaxy on 6H-SiC and 4H-SiC substrates has been performed. The material has been characterized using atomic force microscopy (AFM) and reflective high energy electron diffraction (RHEED). AlN crystals were deposited on the following 6H-SiC substrates: singular with and without an initial SiC epilayer, and 3.5° off-axis with and without an initial SiC epilayer. AlN crystals were deposited on 8.0° off-axis 4H-SiC with and without initial SiC epilayers. AFM shows that the deposition of AlN on 6H-SiC and 4H-SiC with an initial SiC epilayer displays high quality quasi-two dimensional growth as atomically flat or step flow epitaxy.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.RHEED patterns of (A) 6H-SiC annealed at 1200°C in H2 for 10 min (B) 6H-SiC prepared with RCA (C) 4H-SiC annealed at 1200°C in H2 for 10 min. and (D) 4H-SiC prepared with RCA. RHEED for samples annealed in vacuum resemble the RHEED for the sample annealed in H2.

Figure 1

Figure 2.Typical RHEED patterns of (A) AlN/6H-SiC smooth surface (B) AlN/6H-SiC rough surface (C) AlN/4H-SiC smooth surface and (D) AlN/4H-SiC rough surface.

Figure 2

Fig. 3.AlN/n-type epi./6H-SiC singular

Figure 3

Fig. 4.AlN/p-type epi/6H-SiC off-Axis

Figure 4

Fig. 5.AlN/p+-type epi/6H-SiC off-Axis

Figure 5

Fig. 6.AlN/6H-SiC Singular

Figure 6

Fig. 7.AlN/6H-SiC off-Axis

Figure 7

Figure 8.AlN/p-type epi/4H-SiC off-axis

Figure 8

Figure 9.AlN/4H-SiC off-axis

Figure 9

Figure 10.AlN/4H-SiC off axis