Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T15:36:41.578Z Has data issue: false hasContentIssue false

Properties of the Biexciton and the Electron-Hole-Plasma in Highly Excited GaN

Published online by Cambridge University Press:  13 June 2014

J.-Chr. Holst
Affiliation:
Institut fuer Festkoeperphysik, Technische Universitaet Berlin
L. Eckey
Affiliation:
Institut fuer Festkoeperphysik, Technische Universitaet Berlin
A. Hoffmann
Affiliation:
Institut fuer Festkoeperphysik, Technische Universitaet Berlin
I. Broser
Affiliation:
Institut fuer Festkoeperphysik, Technische Universitaet Berlin
H. Amano
Affiliation:
Department of Electrical and Electronic Engineering, Meijo University
I. Akasaki
Affiliation:
Department of Electrical and Electronic Engineering, Meijo University

Abstract

High-excitation processes like biexciton decay and recombination of an electron-hole-plasma are discussed as efficient mechanisms for lasing in blue laser diodes [1]. Therefore, the investigation of these processes is of fundamental importance to the understanding of the properties of GaN as a basic material for optoelectronical applications. We report on comprehensive photoluminescence and gain measurements of highly excited GaN epilayers grown by metal-organic chemical vapor deposition (MOCVD) over a wide range of excitation densities and temperatures. For low temperatures the decay of biexcitons and the electron-hole-plasma dominate the spontaneous-emission and gain spectra. A spectral analysis of the lineshape of these emissions is performed and the properties of the biexciton and the electron-hole-plasma in GaN will be disscused in comparison to other wide-gap materials. At increased temperatures up to 300 K exciton-exciton-scattering and band-to-band recombination are the most efficient processes in the gain spectra beside the electron-hole-plasma.

Information

Type
Research Article
Copyright
Copyright © 1997 Materials Research Society
Figure 0

Figure 1.Temperature dependent PL spectra for an excitation density of 3 MW/cm2. The insert displayes the integrated intensity of the M-band versus temperature.

Figure 1

Figure 2.Temperature dependence of the observed peak position for an excitation density of 3 MW/cm2

Figure 2

Figure 3.Intensity dependence of the PL at low temperatures

Figure 3

Figure 4.Temperature dependent PL spectra for an excitation density of 30 MW/cm2 Insert: effective plasma temperature versus the external lattice temperature

Figure 4

Figure 5.Temperature dependence of the peak position for an excitation intensity of 30 MW/cm 2

Figure 5

Figure 6.Intensity dependence of the gain spectra at 1.8 K

Figure 6

Figure 7.Temperature dependent gain spectra for an exciation intensity of 8 MW/cm2