Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T12:09:35.760Z Has data issue: false hasContentIssue false

Normal and Inverted Algan/Gan Based Piezoelectric Field Effect Transistors Grown by Plasma Induced Molecular Beam Epitaxy

Published online by Cambridge University Press:  13 June 2014

M. J. Murphy
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
B. E. Foutz
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
K. Chu
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
H. Wu
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
W. Yeo
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
W. J. Schaff
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
O. Ambacher
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
L. F. Eastman
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853
T. J. Eustis
Affiliation:
Department of Materials Science, Cornell University, Ithaca, NY 14853
R. Dimitrov
Affiliation:
Walter Schottky Institute, TU-Munich, Am Coulombwall, D-85748 Garching, Germany
M. Stutzmann
Affiliation:
Walter Schottky Institute, TU-Munich, Am Coulombwall, D-85748 Garching, Germany
W. Rieger
Affiliation:
School of Electrical Engineering, Cornell University, Ithaca, NY 14853

Abstract

High quality Ga-face and N-face AlGaN/GaN based heterostructures have been grown by plasma induced molecular beam epitaxy. By using Ga-face material we are able to fabricate conventional heterojunction field effect transistors. Because the N-face material confines electrons at a different heterojunction, the resulting transistors are called inverted. The Ga-face structures use a high temperature AlN nucleation layer to establish the polarity. Structures from these materials, relying only on polarization induced interface charge effects to create the two-dimensional electron gases, are used to confirm the polarity of the material as well as test the electrical properties of the layers. The resulting sheet concentrations of the two dimensional electron gases agree very well with the piezoelectric theory for this materials system. Hall mobilities of the two-dimensional gases for the N-face structures are as high as 1150 cm2/Vs and 3440 cm2/Vs for 300 K and 77 K respectively, while the Ga–face structures yield room temperature mobilities of 1190 cm2/Vs. Both structures were then fabricated into transistors and characterized. The inverted transistors, which were fabricated from the N-face material, yielded a maximum transconductance of 130 mS/mm and a current density of 905 mA/mm. Microwave measurements gave an ft of 7 GHz and an fmax of 12 GHz for a gate length of 1 µm. The normal transistors, fabricated from the Ga-face material, produced a maximum transconductance of 247 mS/mm and a current density of 938 mA/mm. Microwave measurements gave an ft of 50 GHz and an fmax of 97 GHz for a gate length of 0.25 µm. This shows that using plasma induced molecular beam epitaxy N-face and Ga(Al)-face AlGaN/GaN heterostructures can be grown with structural and electrical properties very suitable for high power field effect transistors.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Schematic of the wurtzite crystal structure for the different polarities of GaN, showing the placement of the Ga and N atoms.

Figure 1

Figure 2.Schematic layer structure for GaN/AlGaN/GaN heterostructures showing both the total polarization (P) in the AlGaN layer and the interfaces at which the 2DEG will be confined. The N-face yields a 2DEG at the upper interface and hence is called an inverted structure, while the Ga-face confines carriers at the bottom interface and is called a normal structure.

Figure 2

Figure 3.Capacitance voltage profile for the inverted HFET. The graphs clearly show a 2DEG that is confined at the upper interface. This agrees perfectly with the piezoelectric theory for N-face material.

Figure 3

Figure 4.Capacitance voltage profile for the normal HFET. The graphs clearly show a 2DEG that is confined at the lower interface. This agrees perfectly with the piezoelectric theory for Gaface material.

Figure 4

Figure 5.Results from DC and microwave measurements on a normal HFET with a gate length of 0.25 µm and a gate width of 100 µm. For the DC curves, the gate bias starts at + 1.0 V and drops by 1.0 V for each increment.