Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T14:50:47.031Z Has data issue: false hasContentIssue false

Confined self-propulsion of an isotropic active colloid

Published online by Cambridge University Press:  23 December 2021

Francesco Picella
Affiliation:
LadHyX, CNRS – Ecole Polytechnique, Institut Polytechnique de Paris, 91120 Palaiseau, France
Sébastien Michelin*
Affiliation:
LadHyX, CNRS – Ecole Polytechnique, Institut Polytechnique de Paris, 91120 Palaiseau, France
*
†Email address for correspondence: sebastien.michelin@ladhyx.polytechnique.fr

Abstract

To spontaneously break their intrinsic symmetry and self-propel at the micron scale, isotropic active colloidal particles and droplets exploit the nonlinear convective transport of chemical solutes emitted/consumed at their surface by the surface-driven fluid flows generated by these solutes. Significant progress was recently made to understand the onset of self-propulsion and nonlinear dynamics. Yet, most models ignore a fundamental experimental feature, namely the spatial confinement of the colloid, and its effect on propulsion. In this work the self-propulsion of an isotropic colloid inside a capillary tube is investigated numerically. A flexible computational framework is proposed based on a finite-volume approach on adaptative octree grids and embedded boundary methods. This method is able to account for complex geometric confinement, the nonlinear coupling of chemical transport and flow fields, and the precise resolution of the surface boundary conditions, that drive the system's dynamics. Somewhat counterintuitively, spatial confinement promotes the colloid's spontaneous motion by reducing the minimum advection-to-diffusion ratio or Péclet number, ${Pe}$, required to self-propel; furthermore, self-propulsion velocities are significantly modified as the colloid-to-capillary size ratio $\kappa$ is increased, reaching a maximum at fixed ${Pe}$ for an optimal confinement $0<\kappa <1$. These properties stem from a fundamental change in the dominant chemical transport mechanism with respect to the unbounded problem: with diffusion now restricted in most directions by the confining walls, the excess solute is predominantly convected away downstream from the colloid, enhancing front-back concentration contrasts. These results are confirmed quantitatively using conservation arguments and lubrication analysis of the tightly confined limit, $\kappa \rightarrow 1$.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Self-propulsion of a single isotropic phoretic particle of radius $a$ along the axis of a cylindrical pipe of radius $R$ (viewed here in the reference frame of the particle). The particle-to-pipe radius ratio, $\kappa =a/R$, is a measure of the level of confinement. The particle and pipe surfaces are noted $\varGamma _p$ and $\varGamma _d$, respectively. Here $\varGamma _{in}$ and $\varGamma _{out}$ denote cross-sections of the pipe far ahead and behind the particle, respectively. Inset: within a thin interaction layer of thickness $\lambda$, local surface gradients in the chemical solute (orange) released from the particle surface induce a net hydrodynamic slip.

Figure 1

Table 1.Steady-state swimming speed of a squirmer along the axis of a capillary tube for varying confinement ratio $\kappa$ and comparison with the results of Zhu et al. (2013). The swimming velocity is normalised by that in unbounded fluid domains.

Figure 2

Figure 2.Unsteady axisymmetric propulsion velocity $U_z(t)$ of an isotropic phoretic particle along the capillary's axis for increasing level of confinement $\kappa$ (colour) and ${Pe}=2.5$. The results are reported for $\kappa =1/16$, $1/8$, $1/4$, $1/2$, $2/3$ and $3/4$. During the initialisation phase ($t< t_{s}$ with $t_s=25$), the slip velocity on the particle surface is imposed (neutral squirmer), (3.4); for $t>t_{s}$, the phoretic slip velocity and particle dynamics are computed based on the actual surface concentration distribution of the solute, (2.2), and the force-free condition on the particle.

Figure 3

Table 2.Steady-state swimming velocities as a function of ${Pe}$, for an isotropic autophoretic particle in an unbounded domain, and comparison with the results of Michelin et al. (2013) for infinite domains.

Figure 4

Figure 3.(a) Steady-state axisymmetric swimming velocity $U_z$ of an isotropic active particle as a function of the convection-to-diffusion ratio, ${Pe}$, and for increasing confinement $\kappa$ (colour). (b) Same as (a) in logarithmic scale. The results for a single isolated particle in unbounded domains ($\kappa =0$, Michelin et al.2013) is shown for comparison (red dashed line). In (b) the dotted black line indicates the minimum velocity to determine the emergence of a net propulsion. The results are reported here for $\kappa =1/16$, $1/8$, $1/4$, $3/8$, $1/2$, $2/3$ and $3/4$.

Figure 5

Figure 4.(a) Evolution with confinement ($\kappa$) of the critical threshold ${Pe}_c$ for the onset of propulsion. For fixed $\kappa$, the numerical uncertainties on ${Pe}_c$ are defined using the smallest (respectively largest) value of ${Pe}$ for which the steady-state velocity is greater (respectively smaller) than a numerical threshold $U_z^*=5\times 10^{-3}$. (b) Evolution of the rescaled particle velocity with confinement $\kappa$.

Figure 6

Figure 5.Steady-state relative solute concentration distribution and representative streamlines (colour coded by the fluid velocity magnitude) around an isotropic phoretic particle in axisymmetric confinement for ${Pe}=6$ and increasing $\kappa$ (in the laboratory reference frame, i.e. fixed with respect to the capillary walls).

Figure 7

Figure 6.Relative spanwise distribution of (a) solute concentration and (b) streamwise flow velocity (in the particle's reference frame) within the fluid gap between the swimmer and the fixed walls ($z=0$) for increasing confinement $\kappa$ (colour) and ${Pe} = 6.0$. The rescaled radial variable $\hat {r}=(r-a)/(R-a)$ is defined such that $\hat {r}=0$ (respectively $\hat {r}=1$) corresponds to the particle (respectively wall) surface for all values of $\kappa$. In (b) the rescaled fluid velocity with respect to the particle is $\hat {w}=(w+U_z)/(w_{slip}+U_z)$ (note: here $w<0$ throughout the gap in the particle reference frame, and $w=-U_z$ at the wall, $\hat {r}=1$, while $w=w_{slip}<0$ at the particle surface, $\hat {r}=0$). The results are reported for $\kappa =n/10$ with $1\leq n\leq 9$.

Figure 8

Figure 7.(a) Evolution of the spanwise-averaged solute concentration in the fluid around the particle along the pipe for increasing confinement $\kappa$ (colour) for ${Pe}=6$. The particle's position and limits are shown (respectively dash-dotted and dotted lines). The results are reported for $\kappa =n/10$ with $2\leq n\leq 8$. (b) Evolution with $\kappa$ of the front-back concentration contrast measured using the spanwise-averaged concentration at $|z|\gg R$ upstream and downstream from the particle. The dashed line corresponds to the analytical prediction of § 5; see (5.26a–c).

Figure 9

Figure 8(a) Distribution of the surface slip velocity normalised by the average fluid velocity in the particle-capillary gap. The results are reported for $\kappa =n/10$ with $2\leq n\leq 8$. (b) Average fluid velocity in the particle-capillary gap $W$ at varying confinement $\kappa$. Results are shown here for ${Pe}=6.0$. The dashed line corresponds to the analytical prediction, (5.26a–c).

Figure 10

Figure 9.(a) Evolution of the spanwise-averaged fluid pressure in the fluid around the particle for increasing confinement $\kappa$ (colour). The particle's position and limits are shown (respectively dash-dotted and dotted lines). The results are reported for $\kappa =n/10$ with $1\leq n\leq 9$. (b) Evolution with $\kappa$ of the front-back mean pressure difference measured using the spanwise-averaged pressure at $|z|\gg R$ upstream and downstream from the particle. In both panels, results were obtained for ${Pe}=6$. The dashed line with $(1-\kappa )^{-3/2}$ is shown for comparison only.

Figure 11

Figure 10.Global conservation of solute: the dimensionless solute emission ($\kappa ^2$) is compared with the dimensionless excess solute convected downstream from the sphere (${Pe}\,U_z{\rm \Delta} c$).

Figure 12

Figure 11.Relative evolution of the spanwise-averaged axial velocity $W$ of the fluid (relative to the particle) at $z=0$ (narrowest fluid gap) and of the front-back solute concentration ${\rm \Delta} c$. The dotted line corresponds to ${\rm \Delta} c/3$.

Figure 13

Figure 12.(a) Evolution of the rescaled steady-state swimming velocity $U_z$ with ${Pe}$ and $\kappa$. In each plot, the dotted line corresponds to the equality of the two plotted quantities. (b) The same data are reported to identify the behaviour for $\kappa \rightarrow 1$.

Figure 14

Figure 13.Evolution of the rescaled particle velocity with ${Pe}$ for different confinement levels, $\kappa$. The dashed line corresponds to ${Pe}^{-1/2}$.