Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T13:03:02.722Z Has data issue: false hasContentIssue false

Balanced ellipsoidal vortex equilibria in a background shear flow at finite Rossby number

Published online by Cambridge University Press:  15 September 2021

William J. McKiver*
Affiliation:
ISMAR-CNR, Arsenale - Tesa 104, Castello 2737/F, 30122 Venice, Italy
*
†Email address for correspondence: william.mckiver@ve.ismar.cnr.it

Abstract

We consider a uniform ellipsoid of potential vorticity (PV), where we exploit analytical solutions derived for a balanced model at the second order in the Rossby number, the next order to quasi-geostrophic (QG) theory, the so-called QG+1 model. We consider this vortex in the presence of an external background shear flow, acting as a proxy for the effect of external vortices. For the QG model the system depends on four parameters, the height-to-width aspect ratio of the vortex, $h/r$, as well as three parameters characterising the background flow, the strain rate, $\gamma$, the ratio of the background rotation rate to the strain, $\beta$, and the angle from which the flow is applied, $\theta$. However, the QG+1 model also depends on the PV, as well as the Prandtl ratio, $f/N$ ($f$ and $N$ are the Coriolis and buoyancy frequencies, respectively). For QG and QG+1 we determine equilibria for different values of the background flow parameters for increasing values of the imposed strain rate up to the critical strain rate, $\gamma _c$, beyond which equilibria do not exist. We also compute the linear stability of this vortex to second-order modes, determining the marginal strain $\gamma _m$ at which ellipsoidal instability erupts. The results show that for QG+1 the most resilient cyclonic ellipsoids are slightly prolate, while anticyclonic ellipsoids tend to be more oblate. The highest values of $\gamma _m$ occur as $\beta \to 1$. For large values of $f/N$, changes in the marginal strain rates occur, stabilising anticyclonic ellipsoids while destabilising cyclonic ellipsoids.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Schematic of the ellipsoidal vortex of strength $\kappa _v$ whose axes of length $a$, $b$ and $c$ are directed along the unit vectors $\hat {\boldsymbol a}$, $\hat {\boldsymbol b}$ and $\hat {\boldsymbol c}$ respectively, in the presence of background flow induced by a vortex at a distance $R$ and of strength $\kappa _b$. The vortex equilibria are tilted about the $x$-axis by an angle $\eta$ while $\theta$ is the angle between the two vortices. Note $\hat {\boldsymbol a}$ is parallel to the $x$-axis which is directed out of the page in this perspective.

Figure 1

Figure 2.Plot of the growth rates as a function of the magnitude of the strain rate for QG (black solid line), QG+1 cyclonic (thin blue line with pluses) and QG+1 anticyclonic (thin red line with dots) with (a) $h/r=1.25$, $\beta =-1$, $\theta =28^{\circ }$, (b) $h/r=2.5$, $\beta =2$, $\theta =0^{\circ }$.

Figure 2

Figure 3.The ellipsoidal equilibria at the critical turning point for $h/r=2.5$, $\beta =1$ and for different values of the angle $\theta$. The top row shows the QG+1 cyclonic cases and the bottom row shows the QG+1 anticyclonic cases.

Figure 3

Figure 4.Contour maps of the tilt angle $\eta (h/r,\theta )$ for equilibria at the critical turning point $\gamma =\gamma _c$ with $\beta =1$ and showing (a) QG (black solid line) and QG+1 cyclonic (blue dashed) and (b) QG (black solid) and QG+1 anticyclonic (red dotted). The minimum and maximum contour values displayed are $0^{\circ }$ and $40^{\circ }$ respectively, and the contour interval is $10^{\circ }$. The contour corresponding to $\eta =0^{\circ }$ lies along the axis $\theta = 0^{\circ }$, and thus cannot be seen. The $\eta =40^{\circ }$ contour level is indicated.

Figure 4

Figure 5.Contour plots of the magnitude of marginal and turning point strain rates as a function of $\beta$ and $\theta$ in the case of opposite-signed interactions ($\beta <1$) and for QG and QG+1 cyclonic (a,c,e,g,i) and QG and QG+1 anticyclonic (b,d,f,h,j), with $\gamma ^{qg}_c$ (black thick solid), $\gamma ^{qg}_m$ (black dotted), $\gamma ^{cy}_c$ (blue thin solid), $\gamma ^{cy}_m$ (blue dashed), $\gamma ^{ac}_c$ (red thin solid) and $\gamma ^{ac}_m$ (red dashed). The two smallest contour values are indicated, with the maximum contour value being 0.1, and the contour interval is 0.005 for all plots.

Figure 5

Figure 6.Plots of the critical turning point and marginal average inverse strain rates, $\lambda _c$ in (a) and (b), $\lambda _m$ in (c) and (d) as a function of the aspect ratio $h/r$ in the case of opposite-signed interactions ($\beta <1$) for QG and QG+1 cyclonic (a,c) and QG and QG+1 anticyclonic (b,d). The QG values are depicted with thick solid curves, while the QG+1 cyclonic and anticyclonic values are depicted with dashed blue and dashed red curves respectively. The 5 curves shown are for $\beta =-4,-3,-2,-1,0$ with the $\beta =-4$ and $\beta =0$ curves indicated. The minimum of each curve is indicated with black triangles (QG), blue crosses (QG+1 cyclonic) and red crosses (QG+1 anticyclonic).

Figure 6

Figure 7.Plot of the magnitude of the marginal and turning point strain rates as a function of the PV anomaly $\varpi$ for an oblate (a,c,e) and prolate (b,d,f) ellipsoid with $h/r=0.6$ and $h/r=1.67$, respectively, and for $\theta =0^{\circ }$ (a,b), $\theta =30^{\circ }$ (c,d) and $\theta =60^{\circ }$ (e,f). The curves shown represent $\gamma ^{qg}_c$ (black solid line), $\gamma ^{qg}_m$ (black dashed line), $\gamma ^{cy}_c$ (blue solid line), $\gamma ^{cy}_m$ (blue pluses), $\gamma ^{ac}_c$ (red solid line) and $\gamma ^{ac}_m$ (red dots).

Figure 7

Figure 8.Plot of the magnitude of the marginal and turning point strain rates as a function of $f/N$ for an oblate (a,c) and prolate (b,d) ellipsoid with $h/r=0.6$ and $h/r=1.67$, respectively, and for $\theta =30^{\circ }$ (a,b) and $\theta =60^{\circ }$ (c,d). The curves shown represent $\gamma ^{qg}_c$ (black solid line), $\gamma ^{qg}_m$ (black dashed line), $\gamma ^{cy}_c$ (blue solid line), $\gamma ^{cy}_m$ (blue pluses), $\gamma ^{ac}_c$ (red solid line) and $\gamma ^{ac}_m$ (red dots).

Figure 8

Figure 9.As in figure 5 but now for the case of like-signed interactions ($\beta \ge 1$). The two smallest contour values are indicated, with the maximum contour value being 0.1, and the contour interval is 0.005 for all plots.

Figure 9

Figure 10.Plots of the critical turning point average inverse strain rates $\lambda _c$ as a function of the aspect ratio $h/r$ in the case of like-signed interactions ($\beta \ge 1$) for QG and QG+1 cyclonic (a) and QG and QG+1 anticyclonic (b). The 6 curves shown are for $\beta =1,2,3,4,5,6$ with $\beta =1$ and $\beta =6$ indicated. The minimum of each curve is indicated with black triangles (QG), blue crosses (QG+1 cyclonic) and red crosses (QG+1 anticyclonic).

Figure 10

Figure 11.As in figure 7 but now for like-signed interactions with $\beta =2$.

Figure 11

Figure 12.As in figure 8 but now for like-signed interactions with $\beta =2$.