Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T13:10:55.064Z Has data issue: false hasContentIssue false

A Lagrangian probability-density-function model for collisional turbulent fluid–particle flows

Published online by Cambridge University Press:  11 January 2019

A. Innocenti
Affiliation:
Sorbonne Université, Centre National de la Recherche Scientifique, UMR 7190, Institut Jean Le Rond D’Alembert, F-75005 Paris, FranceDipartimento di Ingegneria Civile e Industriale, Università di Pisa, Via G. Caruso 8, 56122 Pisa, Italy
R. O. Fox
Affiliation:
Department of Chemical and Biological Engineering, 618 Bissell Road, Iowa State University, Ames, IA 50011-1098, USA
M. V. Salvetti
Affiliation:
Dipartimento di Ingegneria Civile e Industriale, Università di Pisa, Via G. Caruso 8, 56122 Pisa, Italy
S. Chibbaro*
Affiliation:
Sorbonne Université, Centre National de la Recherche Scientifique, UMR 7190, Institut Jean Le Rond D’Alembert, F-75005 Paris, France
*
†Email address for correspondence: chibbaro@ida.upmc.fr

Abstract

Inertial particles in turbulent flows are characterised by preferential concentration and segregation and, at sufficient mass loading, dense particle clusters may spontaneously arise due to momentum coupling between the phases. These clusters, in turn, can generate and sustain turbulence in the fluid phase, which we refer to as cluster-induced turbulence (CIT). In the present work, we tackle the problem of developing a framework for the stochastic modelling of moderately dense particle-laden flows, based on a Lagrangian probability-density-function formalism. This framework includes the Eulerian approach, and hence can be useful also for the development of two-fluid models. A rigorous formalism and a general model have been put forward focusing, in particular, on the two ingredients that are key in moderately dense flows, namely, two-way coupling in the carrier phase, and the decomposition of the particle-phase velocity into its spatially correlated and uncorrelated components. Specifically, this last contribution allows us to identify in the stochastic model the contributions due to the correlated fluctuating energy and to the granular temperature of the particle phase, which determine the time scale for particle–particle collisions. The model is then validated and assessed against direct-numerical-simulation data for homogeneous configurations of increasing difficulty: (i) homogeneous isotropic turbulence, (ii) decaying and shear turbulence and (iii) CIT.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.Time evolution of the dimensionless particle-phase energy components for $St_{f}=0.81$. The curves correspond to the three considered sets of initial conditions: case (i) solid lines, (ii) dashed lines and (iii) $+$ line. $\unicode[STIX]{x1D705}_{p}$ is plotted in blue, $k_{p}$ in green and $(3/2)\unicode[STIX]{x1D6E9}_{p}$ in red. (a) Simulations with the complete particle model (8.1). (b) Simulations carried out with the simplified particle model (7.17) with $C_{0}=2.1$. Only total kinetic energy $\unicode[STIX]{x1D705}_{p}$ is computed. (c) Results from Fox (2014) with the same initial conditions as in (a). (d) Results of point-particle DNS from figure 8 of Février et al. (2005), where the results are in dimensional form. The notation in Février et al. (2005) is $q_{p}^{2}=\unicode[STIX]{x1D705}_{p}$, $\widetilde{q}_{p}^{2}=k_{p}$, $\unicode[STIX]{x1D6FF}q_{p}^{2}=(3/2)\unicode[STIX]{x1D6E9}_{p}$ and $\unicode[STIX]{x1D70F}_{fp}^{F}\propto \unicode[STIX]{x1D70F}_{D}$.

Figure 1

Figure 2.Fluid turbulent kinetic energy as a function of the non-dimensional time, $t/T_{e}$, in decaying fluid–particle turbulence: (a) complete particle model, (b) simplified particle model, (c) Fox (2014) Eulerian model and (d) DNS of Sundaram & Collins (1999). The curves correspond to four different Stokes numbers: $St=0$, solid line; $St=0.17$, dashed lines; $St=0.35$, dotted lines; $St=0.69$, dash-dotted lines. In panel (d) $T_{f}\propto k_{f}$.

Figure 2

Figure 3.Particle-phase fluctuating energy as a function of the non-dimensional time, $t/T_{e}$, in decaying fluid–particle turbulence: (a) complete particle model, (b) simplified particle model, (c) Eulerian model of Fox (2014) and (d) DNS of Sundaram & Collins (1999). The curves correspond to the following Stokes numbers: $St=0.17$, dashed lines; $St=0.35$, dotted lines; $St=0.69$, dash-dotted lines. In panel (d) $T_{f}\propto k_{f}$.

Figure 3

Figure 4.Homogeneous-shear flow. Fluid turbulent kinetic energy as a function of the non-dimensional time, $t/T_{e}$ with (a) the complete stochastic model, (b) the simplified stochastic model and (c) the Eulerian model by Fox (2014). The curves correspond to four different Stokes numbers: $St=0$, solid line; $St=0.17$, dashed lines; $St=0.35$, dotted lines; $St=0.69$, dash-dotted lines.

Figure 4

Figure 5.Homogeneous-shear flow. Particle-phase fluctuating energy as a function of the non-dimensional time, $t/T_{e}$ with (a) complete particle model, (b) simplified particle model and (c) Eulerian model in Fox (2014). The curves correspond to the Stokes numbers: $St=0.17$, dashed lines; $St=0.35$, dotted lines; $St=0.69$, dash-dotted lines.

Figure 5

Table 1.Fluid–particle parameters used in CIT simulations (Capecelatro et al.2015).

Figure 6

Table 2.Values of the model constants used in CIT simulations for the complete model.

Figure 7

Table 3.Values of the model constants used in CIT simulations for the simplified model.

Figure 8

Figure 6.Time evolution of the vertical mean fluid velocity seen by the particles (a) and of the vertical mean particle velocity (b) from the complete (red line) and from the simplified (blue dot-dashed line) stochastic model. The horizontal black dashed line represents the steady-state mean velocity from the DNS of Capecelatro et al. (2015).

Figure 9

Figure 7.Time evolution of second-order moments of the vertical mean fluid velocity seen by the particles (a) and of the vertical mean particle velocity (b) from the complete (red line) and from the simplified (blue dot-dashed line) stochastic model. The horizontal black dashed line represents the steady-state mean velocity from the DNS of Capecelatro et al. (2015).

Figure 10

Figure 8.Time evolution of $\langle u_{p,1}u_{s,1}\rangle$ (a) and of $k_{f}$ (b) from the complete (red line) and from the simplified (blue dot-dashed line) stochastic model. The horizontal black dashed line represents the steady-state mean velocity from the DNS of Capecelatro et al. (2015).

Figure 11

Table 4.Steady-state values of fluid-phase velocity statistics. EL simulation data are taken from Capecelatro et al. (2015).

Figure 12

Table 5.CIT: steady-state values of particle-phase velocity statistics. EL simulation data are taken from Capecelatro et al. (2015).

Figure 13

Table 6.CIT: steady-state values of fluid-phase turbulence statistics seen by particles. EL simulation data are taken from Capecelatro et al. (2015).

Figure 14

Figure 9.Time evolution of $\unicode[STIX]{x1D70C}_{fp}=k_{fp}/(k_{f@p}k_{p})^{1/2}$ from the complete stochastic model. The horizontal black dashed line represents the steady-state mean value from the DNS of Capecelatro et al. (2015).