Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T22:49:31.321Z Has data issue: false hasContentIssue false

Extrinsic Performance Limitations of AlGaN/GaN Heterostructure Field Effect Transistors

Published online by Cambridge University Press:  13 June 2014

P.P. Ruden
Affiliation:
ECE Department, University of Minnesota, Minneapolis, MN 55455
J.D. Albrecht
Affiliation:
ECE Department, University of Minnesota, Minneapolis, MN 55455
A. Sutandi
Affiliation:
ECE Department, University of Minnesota, Minneapolis, MN 55455
S.C. Binari
Affiliation:
Electronics Science and Technology Div., Naval Research Laboratory, Washington, DC 20375
K. Ikossi-Anastasiou
Affiliation:
Electronics Science and Technology Div., Naval Research Laboratory, Washington, DC 20375
M.G. Ancona
Affiliation:
Electronics Science and Technology Div., Naval Research Laboratory, Washington, DC 20375
R.L. Henry
Affiliation:
Electronics Science and Technology Div., Naval Research Laboratory, Washington, DC 20375
D.D. Koleske
Affiliation:
Electronics Science and Technology Div., Naval Research Laboratory, Washington, DC 20375
A.E. Wickenden
Affiliation:
Electronics Science and Technology Div., Naval Research Laboratory, Washington, DC 20375

Abstract

Extrinsic effects on the DC output characteristics of AlGaN/GaN HFETs with 1 m gate lengths are examined. The devices investigated were fabricated on MOCVD-grown AlGaN/ GaN heterostructures on sapphire substrates. An analytical model that takes into account parasitic resistances and thermal effects is constructed, and its results are compared with experimental data. With parameters determined from characterization experiments on the same wafer and from independent theoretical results, the agreement between the data and the model predictions is found to be very good. The model is then applied to performance predictions for devices with improved series resistances and heat sinking.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1:Schematic HFET diagram.

Figure 1

Figure 2:Calculated values of d and electron concentration in the lowest subband as a function of the total sheet carrier density.

Figure 2

Figure 3:Comparison of the measured AlGaN/GaN heterostructure capacitance for a 75 μm dot with calculated results. Also shown is the resulting ns vs. Vg from the subband calculation (dots) and from equation (2).

Figure 3

Figure 4:Measured (TLM) contact resistances and Idsat for an ungated device for various anneal times and temperatures.

Figure 4

Figure 5:Comparison of the experimental (boxes 0 to 10V and diamonds 0 to 20V) and calculated (lines) drain current vs. drain-to-source bias in the absence of illumination. The gate voltages vary from 0 to −4V.

Figure 5

Figure 6:Comparison of the experimental (points) and calculated (lines) drain current vs. drain-to-source bias with device illumination. The gate voltages vary from 0 to −4V.

Figure 6

Figure 7:Comparison of expected HFET output characteristics of a device with decreased contact-to-channel spacing and reduced contact resistance (dashed curves) to the results of Figure 6 (solid curves). Also shown are the results expected for a perfectly heat sunk device (dotted curves).