Introduction
Widespread utilization of wireless services at a low cost is driving the demand for high bandwidth to support a variety of user-applications with better coverage. Modern phased array antenna systems are increasingly used as they facilitate highly directional transmission [Reference Balanis1] to reduce path loss and improve the signal to noise ratio as high frequency carriers are used to maximize throughput. Phased array antennas reduce interference and save power making those very resourceful in urban environments with high user equipment density. Passive networks such as the butler matrix are integral to develop phased array systems in order to provide the necessary progressive phase shift between the antenna elements to tilt the beam in the desired direction. Butler matrix is widely used in design of adaptive antenna for Wi-Fi system enhancement [Reference Abdulmonem, Elsohby, Hossam, Shokry and Eshrah2], improve diversity in MIMO systems [Reference Uthansakul and Uthansakul3] by enhancing received signal strength using beams from different antennas [Reference Liao, Tuan, Lee and Ho4]. Beamforming network such as the butler matrix is fundamental in building multi-beam phased array antenna [Reference Yu, Wan, Zhang, Teng, Lei and Liu5] for wide scanning angle in satellite communication. Also phase shifting networks for antennas provide crucial spherical coverage for excellent spatial coverage to boost the input power density for harvesting of ambient RF energy [Reference Vandelle, Bui, Vuong, Ardila, Wu and Hemour6]. Telecommunication companies have demonstrated multiplexing techniques [Reference Sasaki, Yagi, Yamada, Semoto and Lee7] using butler matrix to achieve over 100 Gbit/s wireless transmission. The extensive usage of butler matrix in phased array antennas motivates to explore novel techniques to achieve compact form factor with enhanced functionalities. Researchers have developed non-planar 3D printed W-band butler matrix [Reference Tamayo-Dominguez, Fernandez-Gonzalez and Sierra-Castaner8] and a high-power butler matrix using mechanical milling for RADAR application [Reference Paul, Harinath, Garg, Aich, Kumar, Trivedi, Kumar, Patel, Rao and Jyoti9]. However, for hand-held equipment, it is imperative to have planar and low-weight solution for beamforming networks. Microstrip technology aids in design of planar microwave/millimeter-wave butler matrix for beam scanning [Reference Liu, Xiao, Guo, Tang, Bai and Wang10–Reference Nasseri, Bemani and Ghaffarlou12] using hybrids, crossover and phase shifter with simple layout. Although microstrip-based hybrids and crossover enjoy planar form-factor, they are usually built using quarter-wavelength transmission line which occupy a large lateral area, suffer from higher order harmonics and have poor shielding due to their semi-open structure. Substrate integrated waveguide (SIW) [Reference Bozzi, Georgiadis and Wu13, Reference Chaturvedi, Kumar, Althuwayb and Ahmadfard14] technology serves as an attractive candidate to overcome the problem of semi-open microstrip technology and have lower insertion loss. Moreover, SIW maintains the planar configuration as it utilizes the traditional PCB fabrication technique to synthesize waveguides in thin dielectric substrates. Researchers have extensively studied and developed SIW-based beamforming networks [Reference Chen, Hong, Kuai, Xu, Wang, Chen, Tang, Zhou and Wu15] for a variety of wireless applications. In [Reference Sun, Ban, Zhao, Li and Zheng16, Reference Ali, Fonseca, Coccetti and Aubert17], multilayer configurations of SIW have been explored to reduce the lateral area and provide comparable performance. Although novel technologies such as integrated passive device [Reference Titz, Ferrero, Pilard, Laporte, Jan, Ezzeddine, Gianesello, Gloria, Jacquemod and Luxey18] and SiGe-based fabrication [Reference Zhang and Fusco19] have shown to build compact butler matrices in a compact size, they often come at the expense of increased manufacturing cost. An interesting solution to this problem is adopting TEM-based transmission line that provides similar signal integrity as SIW but in smaller footprint with low cost and ease of integration with other planar technologies. Recently, substrate integrated coaxial line (SICL) has gained interest due to its non-dispersive unimodal TEM-propagation [Reference Gatti, Bozzi, Perregrini, Wu and Bosisio20] for design of high performance microwave circuits. A lot of progress is made in SICL-based circuits with demonstration of bandpass filter [Reference Krishna and Mukherjee21], balun [Reference Krishna and Mukherjee22], coupler [Reference Krishna, Delmonte, Silvestri, Bozzi and Mukherjee23], oscillator [Reference Du, Yu, Zhang and Chen24] and antennas [Reference Liu, Xing, Wu, Guo, Wei, Ma and Zhao25] for wireless applications. A broadband beam scanning antenna array using butler matrix [Reference Li, Hou, Zhu, Qi, Xiao and Cao26] has been demonstrated based on SICL technology for Q-band application. But the proposed system occupies a large footprint due to utilization of traditional coupler and crossover conceived using back to back connected coupler.
This work explores the design of a compact 4 × 4 butler matrix in SICL technology. A branch line coupler with open stubs is devised in a compact size for enhanced rejection in the out of band region. The measurement results of wideband SICL-based crossover conceived for the proposed butler matrix indicates high isolation in a compact footprint. SICL-based crossover proposed in this work uses a plated through hole as transition with a square ground patch between the overlapping region of two paths. The required progressive phase shift between the input and output ports of butler matrix is achieved by a meandered SICL line to work as phase shifter. The TEM mode-based butler matrix in SICL technology is suitable for mass production using low cost PCB fabrication and has small footprint in a self-packaged and self-shielded form-factor.
Modeling of proposed SICL-based butler matrix
A substrate integrated coaxial line is realized by sandwiching a metallic conducting strip between two dielectric substrates covered with metal surfaces forming the top and bottom ground plane. The outer conductor of this planar coaxial line is created by using the plated through vias along the inner conductor connecting the top and bottom ground plane as shown in Fig. 1. The diameter of the plated via and pitch of vias are chosen such that wave-leakage from this planar shielded structure is minimized. Also the distance between via rows play an important role in determining the single-mode TEM-mode bandwidth of SICL [Reference Gatti, Bozzi, Perregrini, Wu and Bosisio20]. In this work, the design methodology and development of SICL-based coupler, crossover, and phase shifter are discussed to realize a butler matrix for beamforming applications.
Multi-layer stack up of an SICL structure.
Design of compact SICL-based branch line coupler with harmonic suppression
A SICL-based branch line coupler depicted in Fig. 2 is constructed using a set of two transmission lines of characteristic impedance 
$Z_{se1}$ and 
$Z_{se2}$ with the same electrical θa. Two open circuited stubs with unequal electrical length θx and θy are center tapped on the series transmission line with characteristic impedance 
$Z_{se1}$ and 
$Z_{se1}$ respectively as shown in Fig. 2. The electrical length of open stubs is selected such that they become quarter-wave length long in the out of band region to provide wide suppression to any spurious wave propagation. The characteristic impedance 
$Z_{se1, se2}$, 
$Z_{sh1, sh2}$ are related to the electrical length of the series and shunt branches of proposed coupler (θa, θx, θy) as derived in 1a–1d.
\begin{equation}
{Z_{se1}} = \frac{{{Z_o}}}{{\sqrt 2 }}\cot \left( \theta _a \left/\vphantom{\sum} 2\right. \right),
\end{equation}
\begin{equation}
{Z_{se2}} = {Z_o}\cot \left( \theta _a \left/\vphantom{\sum} 2\right. \right),
\end{equation}
\begin{equation}
{Z_{sh1}} = \frac{{{Z_o}}}{{\sqrt 2 \cot \left( {{\theta _x}} \right)\left( 1 - {{\tan }^2}\left( \theta _a \left/\vphantom{\sum_q^1} 2\right. \right) \right)}},
\end{equation}
\begin{equation}
{Z_{sh2}} = \frac{{{Z_o}}}{{\cot \left( {{\theta _y}} \right)\left( 1 - {{\tan }^2}\left( \theta _a \left/\vphantom{\sum_a^0} 2\right. \right)\right)}}.
\end{equation}Layout of compact SICL-based branch line coupler with unequal length stubs.
The proposed SICL coupler is designed as discussed in detail in [Reference Krishna, Delmonte, Silvestri, Bozzi and Mukherjee23] to achieve a wide out of band suppression up to 4fo with equal power division at 5 GHz.
Modeling of a compact SICL-based crossover with very high isolation
The 3D stack up and layer-wise view of the proposed SICL crossover is shown in Fig. 3. The proposed SICL-based crossover comprises of two transmission paths. The path 1 comprises of two 50 Ω SICL lines which are connected through a GCPW line. The SICL conductor in the middle layer and GCPW line co-located in the top ground of SICL line is connected using a vertical plated through hole as transition. In order to avoid shorting path 1 with the bottom ground plane, a slot with diameter Dout is created a shown in Fig. 3. Similarly path 2 consists of two 50 Ω SICL lines that are connected through a GCPW line located on the bottom ground plane of SICL line as shown in Fig. 3. The advantage of using a through via instead of blind via is it reduces the fabrication complexity. It is crucial the complete transmission path is 50 Ω in order to minimize any reflections at the SICL-GCPW junction and GCPW-SICL junction. The diameter of the plated through hole used to connect the SICL inner conductor with the GCPW line is carefully selected in order to ensure minimal discontinuity at junction as shown in Fig. 4(a). Also the GCPW line width in the top and bottom ground plane is chosen after studying the effect of overlap between path 1 and path 2 as shown in Fig. 4(b). The isolation between the two paths is an important parameter in design of a crossover. In the proposed crossover the isolation is a function of separation between the two paths which is decided by the height of substrate, dielectric constant of the substrate and area of overlap between the two paths. The main cause for degradation of isolation is coupling between the two paths through the overlap region formed by the GCPW line in the top and bottom ground plane. In order to enhance the isolation between the two paths, a square patch of side length Sp that is connected to the ground plane is introduced. The effect of the square ground patch separating the overlapping regions of path 1 and path 2 is studied in Fig. 5 through full-wave simulation. The isolation between the two paths of the proposed crossover is enhanced from 24 dB (no isolating square patch) to 72 dB when the a square patch of side length 3.1 mm is chosen.
Stack up of the proposed compact SICL-based crossover and individual metal layer with dimensions: Db = 1 mm, Din = 1.5 mm, Dout = 1.98 mm, Dv = 1 mm, Lc = 4.5 mm, Lw = 5.58 mm, Sp = 3.1 mm, Sv = 1.55 mm.
Analysis of proposed crossover to study the effect of change in (a) diameter of through hole (Db) and (b) width of GCPW line located on top/bottom ground plane of SICL.
Variation in isolation of proposed crossover with change in side length of square patch (Sp).
Design of self-packaged and self-shielded compact butler matrix in SICL technology
Branch line coupler, crossover, and phase shifter form the building blocks of a butler matrix. However, one of the major shortcomings of the traditional butler matrix is the utilization of microwave networks that consist of quarter-wavelength transmission lines. At low frequency, they occupy large lateral and increase the overall size and weight of the system. In this work, an interesting solution is proposed to address this problem by utilizing compact microwave networks developed in SICL technology. The proposed 4 × 4 butler is conceived using an compact SICL hybrid coupler, compact SICL crossover with very high isolation to minimize inter-channel interference and a meandered SICL line as phase shifter. SICL-based coupler, crossover, and phase shifter are integrated to form the proposed butler matrix as per the schematic shown in Fig. 6. It consists of four hybrid couplers, two crossovers and four phase shifters. The phase difference between the input and output ports of the butler matrix is shown in Table 1. In order to verify the performance of the proposed butler matrix, at each input and output ports of the butler matrix an SICL to GCPW transition is designed to facilitate the mounting of an SMA connector. The layout of the proposed compact SICL-based butler matrix after integration of the coupler, crossover, and phase shifter is shown in Fig. 7.
Schematic diagram of the proposed compact SICL-based butler matrix.
Phase shift between input and output ports of butler matrix
Geometrical layout of the SICL-based butler matrix.
Experimental validation and discussion
In this work, all the proposed designs have been fabricated using two layers of Taconic TLY-5 (ϵr = 2.2, tan δ = 0.0009) substrate. One of the major advantages of SICL is its low-cost fabrication and the prototypes developed in this work are built using micro-milling technique in LPKF protomat E33 machine. In order to maintain the necessary alignment between the bottom and top substrate layers along with metallic screws, standard epoxy glue has been used. Furthermore, all the via holes in the proposed SICL devices are metalized using LPKF ProConduct paste to provide lateral shielding. Also the outer conductor of the SICL formed by plated though holes and ground planes create a self-packaged structure making it an attractive candidate for deployment in densely integrated systems with good electromagnetic compatibility. The photograph of the final fabricated prototype of the proposed compact SICL coupler, crossover, and the integrated butler matrix is shown in Fig. 8. The fabricated prototype is experimentally validated by measuring the S-parameters up to 20 GHz using Keysight E5080B vector network analyzer (VNA). The full-wave simulated S-parameters generated using Ansys high-frequency structural simulator are compared with the S-parameters recorded using VNA. In Fig. 9, the branch line coupler measured results indicate return loss and isolation better than 15 dB at 5 GHz with harmonic suppression up to 20 GHz. Furthermore, the SICL coupler demonstrates low measured amplitude imbalance of ±0.5 dB and phase imbalance less than ±3∘ in the frequency range covering 4.6–5.3 GHz with a footprint of 11.6 mm × 11.6 mm, or equivalently an area of 0.078 
$\lambda_g^2$ [Reference Krishna, Delmonte, Silvestri, Bozzi and Mukherjee23].
Photograph of the fabricated SICL-based components: (a) top view of branch line coupler, (b) bottom view of branch line coupler, (c) top view of crossover, (d) bottom view of crossover, (e) top view of butler matrix, (f) bottom view of butler matrix.
Full-wave simulated and experimentally measured results of the proposed SICL-based compact branch line coupler with broad out of band rejection. (a) & (b) S-parameters, (c) phase difference and amplitude imbalance.
The measured and full-wave simulated S-parameters of the proposed SICL-based crossover are shown in Fig. 10. The proposed crossover demonstrates return loss better than 10 dB across DC to 10 GHz with return loss better than 21 dB at 5 GHz. The role of central square patch in substantially enhancing the isolation is justified in the proposed crossover with measured isolation greater than 56 dB between port 1 and port 3, and 65 dB between port 3 and port 2 at 5 GHz. The proposed compact SICL-based crossover exhibits an insertion loss of 0.84 dB in path 1 and 1.2 dB in path 2. The core part of the crossover without the additional feeding SICL lines and GCPW transition occupies 7.5 mm × 7.5 mm, covering an area of of 0.034 
$\lambda_g^2$, where λg is the guided wavelength at 5 GHz. The proposed SICL offers very high isolation and is highly compact compared to the other substrate integrated circuit (SIC) counterparts. The photograph of the fabricated SICL butler matrix is shown in Fig. 8. Comparison between the full-wave simulated and measured reflection and transmission coefficients of the SICL-based butler matrix when input ports, Port 1, Port 2, Port 3, and Port 4 are excited is shown in Fig 11. The proposed butler matrix demonstrates a measured return loss better than 16 dB at 5 GHz. Furthermore, measured insertion loss less than 1.78 dB when port 1, port 2, and port 3 are excited and 2 dB when port 4 is excited has been recorded at 5 GHz. The isolation between input ports is measured better than 16 dB between port 1 to port 2 and port 3 to port 4 as shown in Fig. 12. Whereas, the measured isolation is better than 40 dB between port 1 to port 3 and port 2 to port 4 owing to the high isolation offered by the proposed SICL crossover. The measured and full-wave simulated phase shift between the input and output ports in Fig. 13 shows a phase imbalance of ∼8.78∘ at 5 GHz. The deviation between measured and simulated results can be attributed due to the fabrication tolerance and air gaps created during bonding the multi-layered SICL structure.
Measured and full-wave simulated S-parameters of the proposed compact SICL-based crossover: (a) Port 1 is excited and (b) Port 3 is excited.
Comparison between full-wave simulated and measured transmission coefficients of SICL-based butler matrix when input: (a) Port 1, (b) Port 2, (c) Port 3, (d) Port 4 is excited and (e) reflection coefficients.
Full-wave simulated and measured isolation between input ports (Port 1–Port 4) of the proposed SICL-based butler matrix.
Comparison between full-wave simulated and measured phase difference between input and output ports of the proposed SICL butler matrix.
Conclusion
In this work, design and analysis of a compact 4 × 4 butler matrix is reported. The butler matrix operating at 5 GHz utilizes a coupler modeled using open stub that is center tapped to each arm of the coupler in order to generate transmission zeros in the out of band region and reduce the overall footprint to 0.078 
$\lambda_g^2$. A novel wideband SICL-based crossover to maintain high isolation between overlapping paths in the butler matrix is conceived with insertion loss less than 0.84 and 1.2 dB in path 1 and path 2, respectively. Moreover, the SICL crossover exhibits an measured isolation greater than 56 and 65 dB between the adjacent ports. Finally, a 45∘ and 0∘ phase shifter is realized using a meandered SICL-based transmission line for the proposed 4 × 4 butler matrix to provide required progressive phase shifts between the output ports. The integrated compact butler matrix shows a measured return loss better than 16 dB and insertion loss less than 2 dB at 5 GHz. SICL makes an worthy candidate due to its compact size and low cost fabrication for a variety of practical applications.
Acknowledgements
This work is carried out under the European Microwave Association (EuMA) internship award 2021 in the University of Pavia.
Competing interests
None declared.
Satya Krishna Idury was born in Andhra Pradesh, India, in 1993. He received the B.E. degree from the TJ Institute of Technology, Anna University, in 2014. He received his master’s degree with specialization in communication systems from the Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, India, in 2017 and Ph.D. degree with the Department of Electrical Engineering, Indian Institute of Technology Jodhpur, Jodhpur, India in 2022. His current research interests include design of substrate integrated circuits for microwave and millimeter-wave communication systems. He received the prestigious European Microwave Association (EuMA) Internship award for the year 2021 to pursue research work at University of Pavia, Italy. He has been a recipient of EuMC Student Grant Award in European Microwave Conference consecutively in 2019 and 2020, and was awarded with IEEE MTT-S MGA SSI Sponsorship to attend Asia Pacific Microwave Conference 2019, Singapore. Mr. Idury Satya Krishna was also a recipient of the CSIR Student Travel Grant. He received gold medal for excellence in academics and best thesis award for his work on “Novel dual-band crossovers with flexible frequency ratio” during his post-graduation in Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, India.
Nicoló Delmonte was born in Broni, Italy, in 1992. He received the bachelor’s degree in electronics and computer engineering and the master’s degree in electronic engineering from the University of Pavia, Italy, in February 2015 and September 2017, respectively, and the Ph.D. degree from the Microwave Laboratory research group of the University of Pavia, in April 2021. He is currently working as a Postdoctoral Researcher with the University of Pavia. His main research topics include passive microwave components in substrate integrated waveguide (SIW) technology, 3D printed electromagnetic devices, and antenna array development.
Lorenzo Silvestri was born in Novara, Italy, in July 1987. He received the M.Sc. degree in electronic engineering telecommunication system curriculum and the Ph.D. degree in electronic, electrical, and computer engineering from the University of Pavia, Pavia, Italy, in 2014 and 2019, respectively. In 2014, he was a recipient of a one year post-graduate scholarship at the University of Pavia, working on passive substrate integrated waveguide (SIW) component. After the Ph.D. until September 2020, he held a postdoctoral position with the University of Pavia, working on the design of reconfigurable SIW antennas. He is currently a Researcher at the University of Pavia. In 2015, he was a co-recipient for the Best Paper Award at 15th Mediterranean Microwave Symposium (MMS 2015).
Maurizio Bozzi received the Ph.D. degree in electronics and computer science from the University of Pavia in 2000. He held research positions with various universities, including the Technische Universitat Darmstadt, Germany, the Universitȧt de Valencia, Spain, and the École Polytechnique de Montréal, Canada. In 2002, he joined the University of Pavia, where he is currently a Full Professor. He was also a Guest Professor at Tianjin University, China, and a Visiting Professor at Gdansk University of Technology, Poland. His main research interests concern the computational electromagnetics, the substrate integrated waveguide technology, and the use of novel materials and fabrication technologies for microwave circuits. He authored or co-authored more than 160 journal papers and 350 conference papers, and the book Microstrip Lines and Slotlines (Artech House, 2013). Prof. Bozzi is the 2024 President of the IEEE Microwave Theory and Technology Society (MTT-S). He was an elected Member of the Administrative Committee of MTT-S for years 2017–2022 and a member of the General Assembly of the European Microwave Association for the term 2014–2016. He served as Track Editor of the IEEE Transactions on Microwave Theory and Techniques. He was the General Chair of the various international conferences, including the IEEE IMWS-AMP 2017, IEEE NEMO 2014, and IEEE IMWS 2011, and the General TPC Chair of EuMW 2022. He received several awards, including the 2014 Premium Award for Best Paper in Electronics Letters and the 2015 Premium Award for Best Paper in IET Microwaves, Antennas & Propagation. Prof. Bozzi is a Fellow of the IEEE.
Soumava Mukherjee was born in Kolkata, West Bengal, India, in May 1987. He received the B.Tech. degree in electronics and communication engineering from the West Bengal University of Technology, in 2009, the M.E. degree in electronics and telecommunication engineering from Bengal Engineering and Science University, Shibpur (BESUS), in 2011, with specialization in microwave and communication engineering, and the Ph.D. degree from the Department of Electrical Engineering, IIT Kanpur, in 2016. Since 2016, he has been an Assistant Professor with the Electrical Engineering Department, IIT Jodhpur, Jodhpur, India. His current research interests include substrate integrated coaxial line (SICL) antennas and circuits, substrate integrated waveguide (SIW) antennas, multifrequency and broadband antennas, and chipless RFID. He was a recipient of the European Microwave Student Grant from EuMC 2013 and EuMC 2014. He received the International Travel Grant from the Department of Science and Technology (DST), Government of India. He is a recipient of the Young Scientist Award AP-RASC-2019 (URSI Asia-Pacific Radio Science Conference) instituted by the International Union of Radio Science. He is a Reviewer of potential journals like IEEE Transactions on Antennas and Propagation, the IEEE Antenna Wireless Propagation Letters, IEEE Access, IET Microwaves, Antennas and Propagation (IET MAP), U.K., IET Electronic Letters, U.K., and IET Journal of Engineering, U.K.
