Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T15:38:38.636Z Has data issue: false hasContentIssue false

Structure of AlN on Si (111) Deposited with Metal Organic Vapor Phase Epitaxy

Published online by Cambridge University Press:  13 June 2014

Eric Rehder
Affiliation:
Materials Science Program
M. Zhou
Affiliation:
Dept. of Materials Science
L. Zhang
Affiliation:
Dept. of Chemical Engineering University of Wisconsin – Madison, Madison, WI 53706
N. R. Perkins
Affiliation:
Materials Science Program
S. E. Babcock
Affiliation:
Materials Science ProgramDept. of Materials Science
T. F. Kuech
Affiliation:
Materials Science ProgramDept. of Chemical Engineering University of Wisconsin – Madison, Madison, WI 53706

Abstract

The surface morphology and structure of AlN deposited by metal organic vapor phase epitaxy (MOVPE) on Si (111) at growth temperatures ranging from 825 to 1175°C was investigated. Transmission electron microscopy (TEM), reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM), and secondary ion mass spectrometry (SIMS) techniques were used to study the resulting film structure. Growth at high temperatures but less than ∼1100°C, resulted in a wire texture with some degree of in-plane alignment with (0001)AlN / /(111)Si , < 10 0>AlN //< 11>Si , and 110>AlN //<10>Si . Deposition at temperatures greater than 1100°C results in single crystal films consisting of domains 60 nm across with an aspect ratio near unity. Growth below1100°C leads to degraded crystal quality with the grains developing random rotational misalignments around the AlN [0001] axis. Growth at lower temperatures produces islands elongated along the [110] direction. At the growth temperature of 825°C, the aspect ratio of the islands increased to 3 and a width of 25 nm. Cross-sectional TEM reveals that these islands are faceted due to slow growth on the {1 01}planes.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Sample images from AFM, RHEED, and TEM analysis. The TEM image contains diffraction from both Si and AlN. The diffraction patterns were obtained by TEM-selected area diffraction and obtained on the 1125, 1025, and 925°C samples.

Figure 1

Figure 2.Aspect ratio and angular distributions determined from AFM images.

Figure 2

Figure 3.An AFM line scan and cross section TEM images of the surface structure of the films detailing the faceted{1 01} planes. There is good correspondence between the TEM and AFM determined surface roughness.