Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T06:01:57.405Z Has data issue: false hasContentIssue false

Extreme vortex states and the growth of enstrophy in three-dimensional incompressible flows

Published online by Cambridge University Press:  06 April 2017

Diego Ayala
Affiliation:
Department of Mathematics, University of Michigan, Ann Arbor, MI 48109, USADepartment of Mathematics and Statistics, McMaster University, Hamilton, Ontario, L8S 4K1, Canada
Bartosz Protas*
Affiliation:
Department of Mathematics and Statistics, McMaster University, Hamilton, Ontario, L8S 4K1, Canada
*
†Email address for correspondence: bprotas@mcmaster.ca

Abstract

In this investigation we study extreme vortex states defined as incompressible velocity fields with prescribed enstrophy ${\mathcal{E}}_{0}$ which maximize the instantaneous rate of growth of enstrophy $\text{d}{\mathcal{E}}/\text{d}t$ . We provide an analytic characterization of these extreme vortex states in the limit of vanishing enstrophy ${\mathcal{E}}_{0}$ and, in particular, show that the Taylor–Green vortex is in fact a local maximizer of $\text{d}{\mathcal{E}}/\text{d}t$ in this limit. For finite values of enstrophy, the extreme vortex states are computed numerically by solving a constrained variational optimization problem using a suitable gradient method. In combination with a continuation approach, this allows us to construct an entire family of maximizing vortex states parameterized by their enstrophy. We also confirm the findings of the seminal study by Lu & Doering (Indiana Univ. Math. J., vol. 57, 2008, pp. 2693–2727) that these extreme vortex states saturate (up to a numerical prefactor) the fundamental bound $\text{d}{\mathcal{E}}/\text{d}t<C{\mathcal{E}}^{3}$ , for some constant $C>0$ . The time evolution corresponding to these extreme vortex states leads to a larger growth of enstrophy than the growth achieved by any of the commonly used initial conditions with the same enstrophy ${\mathcal{E}}_{0}$ . However, based on several different diagnostics, there is no evidence of any tendency towards singularity formation in finite time. Finally, we discuss possible physical reasons why the initially large growth of enstrophy is not sustained for longer times.

Information

Type
Papers
Copyright
© 2017 Cambridge University Press 
Figure 0

Table 1.Summary of selected estimates for the instantaneous rate of growth and the growth over finite time of enstrophy and palinstrophy in 1-D Burgers, 2-D and 3-D Navier–Stokes systems. The quantities ${\mathcal{K}}$ and ${\mathcal{E}}$ are defined in (2.2) and (2.4).

Figure 1

Figure 1.Extreme vortex states obtained as solutions of the maximization of Problem 3.1 in the limit ${\mathcal{E}}_{0}\rightarrow 0$ for different choices of set ${\mathcal{W}}_{k}$, as defined in (4.15). Panels (a–c) represent the isosurfaces defined by the the relation $|\unicode[STIX]{x1D735}\times \boldsymbol{u}_{1}|(\boldsymbol{x})=0.95\Vert \unicode[STIX]{x1D735}\times \boldsymbol{u}_{1}\Vert _{L_{\infty }}$, whereas panels (d–f) depict the isosurfaces and cross-sectional distributions in the $y$–$z$ plane of the $x_{1}$ component of the field $\boldsymbol{u}_{1}$. Case (i) cf. (4.17), is presented in (a,d), case (ii) cf. (4.19), in (b,e) and case (iii) cf. (4.21), in (c,f) (see also table 2).

Figure 2

Table 2.Summary of the properties of extreme vortex states $\boldsymbol{u}_{1}$ obtained as solutions of optimization Problem 3.1 in the limit ${\mathcal{E}}_{0}\rightarrow 0$.

Figure 3

Figure 2.(a) Maximum rate of growth of enstrophy ${\mathcal{R}}(\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}})$ and (b) energy of optimal states ${\mathcal{K}}(\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}})$ as functions of ${\mathcal{E}}_{0}$ for small values of enstrophy; the dashed lines represent the asymptotic relation (4.18) (a) and the Poincaré limit ${\mathcal{K}}_{0}={\mathcal{E}}_{0}/(2\unicode[STIX]{x03C0})^{2}$ (b). (c–h) Extreme vortex states $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$ obtained for the three values of enstrophy ${\mathcal{E}}_{0}$ indicated with solid symbols in (a) and (b): panels (c–e) show the isosurfaces corresponding to $Q(\boldsymbol{x})=1/2\Vert Q\Vert _{L_{\infty }}$ with $Q$ defined in (5.1), whereas panels (f–h) show the component of vorticity normal to the plane defined by $\boldsymbol{n}\boldsymbol{\cdot }(\boldsymbol{x}-\boldsymbol{x}_{0})=0$, $\boldsymbol{n}=[1,0,0]$ and $\boldsymbol{x}_{0}=[1/2,1/2,1/2]$.

Figure 4

Figure 3.(a) Maximum rate of growth of enstrophy ${\mathcal{R}}(\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}})$ (solid line) and its cubic part ${\mathcal{R}}_{cub}(\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}})$, cf. (5.3b), (dotted line) and (b) energy of optimal states ${\mathcal{K}}(\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}})$ as functions of ${\mathcal{E}}_{0}$ for large values of enstrophy. (c–h) Extreme vortex states $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$ obtained for the three values of enstrophy ${\mathcal{E}}_{0}$ indicated with solid symbols in (a) and (b): panels (c–e) show the isosurfaces corresponding to $Q(\boldsymbol{x})=1/2\Vert Q\Vert _{L_{\infty }}$ with $Q$ defined in (5.1), whereas panels (f–h) show the component of vorticity normal to the plane defined by $\boldsymbol{n}\boldsymbol{\cdot }(\boldsymbol{x}-\boldsymbol{x}_{0})=0$, $\boldsymbol{n}=[1,0,-1]$ and $\boldsymbol{x}_{0}=[1/2,1/2,1/2]$.

Figure 5

Figure 4.(a) Maximum velocity $\Vert \widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}\Vert _{L_{\infty }}$, (b) maximum vorticity $\Vert \unicode[STIX]{x1D735}\times \widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}\Vert _{L_{\infty }}$, (c) characteristic length scale $\unicode[STIX]{x1D6EC}$ and (d) characteristic radius $R_{\unicode[STIX]{x1D6F1}}$ of the extreme vortex states as functions of ${\mathcal{E}}_{0}$ (all marked with blue solid lines). In all cases two distinct behaviours, corresponding to ${\mathcal{E}}_{0}\rightarrow 0$ and ${\mathcal{E}}_{0}\rightarrow \infty$, are evident with the corresponding approximate power laws indicated with black dashed lines.

Figure 6

Figure 5.The phase space $\{{\mathcal{K}},{\mathcal{E}}\}$. The solid circles and triangles represent, respectively, the instantaneously optimal fields $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$ and $\widetilde{\boldsymbol{u}}_{{\mathcal{K}}_{0},{\mathcal{E}}_{0}}$, with the lines issuing from selected markers indicating the corresponding time-dependent trajectories (the optimal states $\widetilde{\boldsymbol{u}}_{{\mathcal{K}}_{0},{\mathcal{E}}_{0}}$ are discussed in § 8, cf. Problem 8.1). The two lines with a negative slope represent condition (5.11) with the two different constants, whereas the line with a positive slope is the Poincaré limit ${\mathcal{K}}=(2\unicode[STIX]{x03C0})^{2}{\mathcal{E}}$. The shaded areas represent regions of the phase space for which global regularity is not a priori guaranteed based on estimate (2.9) combined with fits (5.2) and (5.4).

Figure 7

Table 3.Characterization of the different initial data used in time evolution studies in § 6.

Figure 8

Figure 6.Isosurfaces corresponding to $Q(\boldsymbol{x})=1/2\Vert Q\Vert _{L_{\infty }}$ for different initial conditions, all normalized to ${\mathcal{E}}_{0}=100$: (a) Kida–Pelz flow, (b) colliding Lamb–Chaplygin dipoles and (c) perturbed antiparallel vortex tubes. Precise characterization of these different initial conditions is provided in table 3.

Figure 9

Figure 7.Time evolution of enstrophy ${\mathcal{E}}(\unicode[STIX]{x1D70F})$ for the initial enstrophy (a) ${\mathcal{E}}_{0}=10$ and (b) ${\mathcal{E}}_{0}=100$ with the initial condition $\boldsymbol{u}_{0}$ corresponding to the instantaneous optimizer $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$ (blue solid line), the Taylor–Green vortex (red dashed-dotted line), the Kida–Pelz vortex (red dashed line), the colliding Lamb–Chaplygin dipoles (black dashed-dotted lines) and the perturbed antiparallel vortex tubes (black dashed lines). Precise characterization of these different initial conditions is provided in table 3.

Figure 10

Figure 8.Evolution of functions $f(\unicode[STIX]{x1D70F})$ (blue solid lines) and $g(\unicode[STIX]{x1D70F})$ (black dashed-dotted lines), cf. (6.1a,b), for flows with the optimal initial condition $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$ with (a) ${\mathcal{E}}_{0}=10$ and (b) ${\mathcal{E}}_{0}=100$. The value $1/{\mathcal{E}}_{0}$ which must be attained in a hypothetical blow-up event is marked by the horizontal dashed line.

Figure 11

Figure 9.Dependence on ${\mathcal{E}}_{0}$ of (a) the maximum enstrophy increase over finite time $\unicode[STIX]{x1D6FF}{\mathcal{E}}$, (b) the time $T_{max}$ when the enstrophy maximum is attained, (c) the maximum achieved by the left-hand side of estimate (2.14), cf. (6.1a), and (d) the energy dissipation during $[0,T_{max}]$; all data correspond to the time evolution starting from the extreme vortex states $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$.

Figure 12

Figure 10.Trajectory of the flow corresponding to the initial condition $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$ with ${\mathcal{E}}_{0}=100$ in the coordinates $\{{\mathcal{E}},\text{d}{\mathcal{E}}/\text{d}t\}$. For comparison, in the inset the thin line represents the borderline growth at the rate $\text{d}{\mathcal{E}}/\text{d}t\sim {\mathcal{E}}^{2}$.

Figure 13

Figure 11.Vortex lines inside the region with the strongest vorticity in the extreme vortex state $\widetilde{\boldsymbol{u}}_{{\mathcal{E}}_{0}}$ with ${\mathcal{E}}_{0}=100$. The colour coding of the vortex lines is for identification purposes only.