Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T11:03:23.972Z Has data issue: false hasContentIssue false

Capillary surfaces in and around exotic cylinders with application to stability analysis

Published online by Cambridge University Press:  12 November 2019

Fei Zhang
Affiliation:
School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, PR ChinaDepartment of Mechanics, Huazhong University of Science and Technology, Wuhan 430074, PR China
Xinping Zhou*
Affiliation:
School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, PR ChinaDepartment of Mechanics, Huazhong University of Science and Technology, Wuhan 430074, PR China
*
†Email address for correspondence: xpzhou08@hust.edu.cn

Abstract

A capillary surface in or around exotic cylinders cannot locate itself, since the configurations of the exotic cylinders with a variable radius permit an entire continuum of equilibrium menisci, all of which have the same potential energy. The ‘exotic’ property indicates that all the menisci have the smallest eigenvalues $\unicode[STIX]{x1D706}_{1}=0$ for the corresponding Sturm–Liouville problems without a volume constraint for stability analysis. Three types of exotic cylinders are addressed and the Sturm–Liouville problems with $\unicode[STIX]{x1D706}=0$ for stability analysis are solved numerically. Notably, the two-dimensional cases can be solved analytically. In the method of Slobozhanin & Alexander (Phys. Fluids, vol. 15, 2003, pp. 3532–3545), the stability of the meniscus is determined by comparing the boundary parameter $\unicode[STIX]{x1D712}_{1}$ and the critical value $\unicode[STIX]{x1D712}_{1}^{\ast }$, which is derived directly from the solution of the Sturm–Liouville problem with $\unicode[STIX]{x1D706}=0$. Results validate that the exotic cylinders have the boundary parameters $\unicode[STIX]{x1D712}_{1}=\unicode[STIX]{x1D712}_{1}^{\ast }$. Motivated by this observation, a new way to determine the critical value $\unicode[STIX]{x1D712}_{1}^{\ast }$ under pressure disturbances for stability analysis is proposed without solving the Sturm–Liouville problem with $\unicode[STIX]{x1D706}=0$.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.The influence of the signed curvature $k_{r}$ of the cylinder cross-section on the contact line height $u_{c}$ for $\unicode[STIX]{x1D703}=\unicode[STIX]{x03C0}/6$. The following values of parameters are used: $\unicode[STIX]{x1D70E}=0.0715~\text{N}~\text{m}^{-1}$, $g=9.81~\text{m}~\text{s}^{-2}$ and $\unicode[STIX]{x1D70C}=1000~\text{kg}~\text{m}^{-3}$. The insets in (a–c) show the configurations of $k_{r}=-500$, 0 and $500~\text{m}^{-1}$ (red dots), respectively. In the insets, the red lines denote the meniscus profiles with $u=0$ located at the water line.

Figure 1

Figure 2.Two families of solution curves for $\unicode[STIX]{x1D713}\in [-\unicode[STIX]{x03C0},\unicode[STIX]{x03C0}]$ (see also figure 2 in Huh & Scriven (1969) and figure 1 in Wente (2011)): (a) $K_{r}<0$ and (b) $K_{r}>0$. The thick red lines represent the envelopes of the solution curves, which divide the solution curves into two parts: $F(\unicode[STIX]{x1D713},t)<0$ for generating the shape of the exotic cylinder (solid lines) and $F(\unicode[STIX]{x1D713},t)>0$ (dashed lines). The dot-dashed lines represent the solution curves of $K_{r}=0$ (i.e. the two-dimensional case), given by the dimensionless form of (2.1) with $\unicode[STIX]{x1D713}_{0}=\unicode[STIX]{x03C0}$.

Figure 2

Figure 3.(a) Three types of exotic cylinders with $\unicode[STIX]{x1D703}=\unicode[STIX]{x03C0}/4$ and $K_{in}=1$, 0 and $-1$ (from left to right), and (b,c) comparison between the shapes of the exotic cylinders with $K_{in}=10^{1}$, $10^{0}$ and $10^{-1}$ for (b) $\unicode[STIX]{x1D703}=\unicode[STIX]{x03C0}/4$ and (c) $\unicode[STIX]{x1D703}=\unicode[STIX]{x03C0}/2$. The thick solid red (thin blue) lines represent cases of $K_{in}>0$$({<}0)$, where the menisci are formed in (around) the exotic cylinders. In (a), the dotted lines represent the central axes and the dashed red lines represent the equilibrium menisci. The cases of $K_{in}=0$ (dashed black lines) are determined by (2.12). The abscissa $K_{in}$ indicates the reciprocal of $R_{0}$, where the central axis of the exotic cylinder is located at $R=0$. The exotic cylinders with $K_{in}<0$ are bounded by two horizontal (dot-dashed) lines $U=2\cos (\unicode[STIX]{x1D703}/2)$ and $U=-2\sin (\unicode[STIX]{x1D703}/2)$.

Figure 3

Figure 4.Stability to pressure disturbances for axisymmetric menisci: (a) the solution curves fixed at the origin for $K_{in}>0$ (see also figure 3 in Slobozhanin & Alexander (2003)) and (b,c) the solution curves with $U=0$ located at the water line for (b) $K_{in}>0$ and (c) $K_{in}<0$. Panel (b) is essentially the same as panel (a) except for the different choices of the ordinates. The thick black lines denote the maximal stable profiles to pressure disturbances and the thin red lines denote the contour lines of $\unicode[STIX]{x1D712}_{1}^{\ast }$. The end point of the maximal stable profile corresponds to $\unicode[STIX]{x1D712}_{1}^{\ast }=\infty$. In these calculations, the order $k$ for (3.8) is given as $k=12$.

Figure 4

Figure 5.(a) Numerical result of (3.16) calculated by the SPPS method and (b) relation between $\unicode[STIX]{x1D712}_{1}^{\ast }$ and $\unicode[STIX]{x1D713}$.

Figure 5

Figure 6.Comparison between the critical values $\unicode[STIX]{x1D712}_{1}^{\ast }$ and the boundary parameters of $\unicode[STIX]{x1D712}_{1}$ of the exotic cylinders with contact angle $\unicode[STIX]{x1D703}=\unicode[STIX]{x03C0}/2$ and parameters $K_{in}=1$ (a), $0$ (b) and $-1$ (c). The abscissa $Y$ denotes the height of the exotic cylinder.

Figure 6

Figure 7.Comparison between the contour lines $\unicode[STIX]{x1D712}_{1}^{\ast }=0$ by solving the Sturm–Liouville problem $L_{0}\unicode[STIX]{x1D711}_{0}=0$ and by (3.30) for (a) $K_{in}>0$ and (b) $K_{in}<0$.