Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T00:44:39.208Z Has data issue: false hasContentIssue false

Reversal cycle in square Rayleigh–Bénard cells in turbulent regime

Published online by Cambridge University Press:  04 November 2016

Andres Castillo-Castellanos
Affiliation:
Sorbonne Universités, UPMC Université Paris 06, UMR 7190, Institut Jean Le Rond d’Alembert, F-75005, Paris, FranceLIMSI, CNRS, Université Paris-Saclay, F-91405 Orsay, France
Anne Sergent*
Affiliation:
LIMSI, CNRS, Université Paris-Saclay, F-91405 Orsay, FranceSorbonne Universités, UPMC Université Paris 06, UFR d’Ingénierie, F-75005, Paris, France
Maurice Rossi
Affiliation:
Sorbonne Universités, UPMC Université Paris 06, UMR 7190, Institut Jean Le Rond d’Alembert, F-75005, Paris, FranceCNRS, UMR 7190, Institut Jean Le Rond d’Alembert, F-75005, Paris, France
*
†Email address for correspondence: anne.sergent@limsi.fr

Abstract

We consider long-term data from direct numerical simulations of turbulent Rayleigh–Bénard convection inside two-dimensional (2-D) square cells. For the range of Rayleigh numbers $Ra=10^{7}{-}10^{8}$ and Prandtl numbers $Pr=3.0{-}4.3$ considered, two types of flow regimes are observed: a regime consisting of consecutive reversals, when the global rotation switches sign; and a regime consisting of an extended cessation, when global rotation is absent. A filtering method discriminates these two regimes and allows us to identify two characteristic time scales for the former regime. A time rescaling is then used to tune our records to a common duration, thus putting into evidence a generic reversal cycle. This cycle is composed of three successive phases: acceleration, accumulation and release including a rebound event. We complement this view in terms of a global angular impulse, available mechanical energy, global kinetic energy and their corresponding transfer rates. For a particular realisation of a reversal, each phase is described in terms of the flow patterns (large diagonal roll, counter-rotating corner flows and thermal plumes) and tied to the corresponding energy processes. We conclude by performing linear as well as nonlinear stability studies to account for the triggering mechanism of the release.

Information

Type
Papers
Copyright
© 2016 Cambridge University Press 
Figure 0

Figure 1.Time evolution of $L_{2D}(t)/\overline{|L_{2D}|}$ shown for ($Ra=5\times 10^{7}$,$Pr=3$). Light blue areas correspond to a consecutive reversal (CR) regime, while blank areas correspond to an extended cessation (EC) regime. Some events (darker blue areas) may not be clearly assigned to the CR regime, see text. The two continuous lines correspond to the thresholds used by the filtering procedure. Value of the normalised standard deviation: $\unicode[STIX]{x1D70E}(|L_{2D}|)/\overline{|L_{2D}|}=0.499$.

Figure 1

Figure 2.Temperature field $\unicode[STIX]{x1D703}(x,y,t)$ at a given instant $t$ (a), the corresponding background state $\unicode[STIX]{x1D703}_{r}(y,t)$ (b) and height $y_{r}(x,y,t)$ (c) for a square RB cell.

Figure 2

Table 1.For various Prandtl and Rayleigh numbers, the table provides the simulation length in convective time units, the number of reversal events, the average Nusselt number and maximum relative difference between $\overline{Nu}_{vol}$, $\overline{Nu}_{top}$, $\overline{Nu}_{bot}$, $\overline{Nu}_{\unicode[STIX]{x1D703}}$, and $\overline{Nu}_{\unicode[STIX]{x1D716}}$.

Figure 3

Figure 3.PDF of $\unicode[STIX]{x1D70F}_{1}$ (a,b) and $\unicode[STIX]{x1D70F}_{d}$ (c,d) for $Pr=4.3$, (a,c) $Ra=5\times 10^{7}$, (b,d) $Ra=10^{8}$. The PDF value is represented by ○ marks. For $\unicode[STIX]{x1D70F}_{1}$ it is the sum of three conditional PDFs: one shown by a thick blue line corresponding to the CR regime, a smaller one shown by an intermediate violet line corresponding to ‘rogue reversals’ and an additional part shown by a fine red line corresponding to the EC regime.

Figure 4

Table 2.Probabilities as a function of $Ra$ and $Pr$. $p_{cr}$ (respectively $p_{ec}$) denotes the probability that the system be inside the CR (respectively EC) regime. $p_{rr}$ denotes the probability of a ‘rogue’ reversal.

Figure 5

Figure 4.PDF for $\unicode[STIX]{x1D70F}_{1}$ (a–c) and $\unicode[STIX]{x1D70F}_{d}$ (d–f) for $Pr=3.0$ and $Ra=10^{7}$ (a,d), $Ra=5\times 10^{7}$ (b,e) and $Ra=10^{8}$ (c,f). Layout is similar to figure 4.

Figure 6

Figure 5.From (a) to (i): normalised global angular impulse $L_{2D}/\overline{|L_{2D}|}$, normalised kinetic energy $E_{kin}/\overline{|E_{kin}|}$ and normalised available potential energy $E_{apot}/\overline{|E_{kin}|}$ for $(Ra=5\times 10^{7},Pr=4.3)$. (a,d,g) Each reversal cycle is centred and its time is rescaled by $\overline{\unicode[STIX]{x1D70F}}_{1}$ (only $10$ reversals are displayed and each colour is a different reversal); (b,e,h) each reversal cycle is centred and its time is rescaled by $\unicode[STIX]{x1D70F}_{1,i}$; (c,f,i) average value of rescaled curves obtained from the complete time series (thick lines) and curves corresponding to one standard deviation (dashed lines).

Figure 7

Figure 6.Curves corresponding to reversals for $Pr=3.0$ as obtained using the procedure described in figure 5. The average $L_{2D}/\overline{|L_{2D}|}$ is shown in thick lines and one standard deviation in dashed lines. From (a) to (c): ($a$) $Ra=10^{7}$, ($b$) $Ra=5\times 10^{7}$ and ($c$) $Ra=10^{8}$.

Figure 8

Figure 7.Conditionally averaged fields $\boldsymbol{u}^{o}(x,y,t)$ and $y_{r}(\unicode[STIX]{x1D703}^{o}(x,y,t))$ at different instants during the generic reversal cycle for $(Ra=5\times 10^{7},Pr=3.0)$. Fields are obtained as the ensemble average over 83 particular reversal cycles. Streamlines of the velocity field $\boldsymbol{u}^{o}$ are superposed over the colour map of field $y_{r}(\unicode[STIX]{x1D703}^{o})$. Solid and dashed streamlines indicate the two senses of rotation.

Figure 9

Figure 8.Generic reversal cycle for $(Ra=5\times 10^{7},Pr=3.0)$. (a) System trajectory in phase space $(L_{2D}/\overline{|L_{2D}|},E_{kin}/\overline{|E_{kin}|},E_{apot}/\overline{|E_{kin}|})$; (b–d) average curves for $L_{2D}/\overline{|L_{2D}|}$, $E_{kin}/\overline{|E_{kin}|}$ and $E_{apot}/\overline{|E_{kin}|}$. Marks (i)–(x) and (a)–(e) indicate particular instants (see text for explanations). The accumulation phase is shaded and indicated by a blue colour bar. The release (respectively acceleration) phase is indicated by an orange (respectively green) colour bar. The same colour code is used in the phase space trajectory position.

Figure 10

Figure 9.(a,b) Generic reversal curves in the plane ($L_{2D}/\overline{|L_{2D}|}$, $E_{kin}/\overline{|E_{kin}|}$). Each curve corresponds to a different $Ra$: $Ra=3\times 10^{7}$ (black line), $Ra=5\times 10^{7}$ (blue line) and $Ra=10^{8}$ (red line). (a) Corresponds to $Pr=3.0$ and (b) to $Pr=4.3$. (c–e) Average curves during one cycle for $L_{2D}/\overline{|L_{2D}|}$, $E_{kin}/\overline{|E_{kin}|}$ and $E_{apot}/\overline{|E_{kin}|}$ for $(Ra=5\times 10^{7},Pr=4.3)$. Figures are displayed as in figure 8.

Figure 11

Figure 10.Instantaneous fields for a particular reversal cycle during the accumulation phase at regular time intervals at $(Ra=5\times 10^{7},Pr=3.0)$. The first snapshot follows point ($\text{e}_{p}^{\prime }$) while the last precedes point ($\text{a}_{p}$). Streamlines are superposed either to vorticity $\unicode[STIX]{x1D714}$ (a), or to kinetic energy $1/2u_{i}u_{i}$ (b).

Figure 12

Figure 11.Instantaneous fields for a particular reversal cycle during the accumulation phase. They are identical to those of figure 10 but streamlines are superposed either to the field $Pr(y_{r}-y)\unicode[STIX]{x1D703}$ (a) or to the field $\unicode[STIX]{x1D735}y_{r}\boldsymbol{\cdot }\unicode[STIX]{x1D735}\unicode[STIX]{x1D703}$ (b). Snapshots correspond to the same instants as in figure 10.

Figure 13

Figure 12.Evolution of $E_{apot}$ contained within the thermal boundary layers (blue line) and outside (black line) at $(Ra=5\times 10^{7},Pr=3.0)$.

Figure 14

Figure 13.Instantaneous fields for a particular reversal cycle during the early release phase (point ($\text{a}_{p}$)–($\text{b}_{p}$)) at regular time intervals $(Ra=5\times 10^{7},Pr=3.0)$. Streamlines are superposed to the field $1/2u_{i}u_{i}$. First snapshot follows point ($\text{a}_{p}$), last precedes point ($\text{b}_{p}$).

Figure 15

Figure 14.Instantaneous fields for a particular reversal cycle during the release phase at $(Ra=5\times 10^{7},Pr=3.0)$. Snapshots correspond to points ($\text{a}_{p}$) to ($\text{d}_{p}$). Streamlines are superposed to either the field $y_{r}(x,z,t)$ (a) or to field $\unicode[STIX]{x1D735}y_{r}\boldsymbol{\cdot }\unicode[STIX]{x1D735}\unicode[STIX]{x1D703}$ (b).

Figure 16

Figure 15.Instantaneous fields for a particular reversal cycle taken at regular intervals during the acceleration phase at $(Ra=5\times 10^{7},Pr=3.0)$. The first snapshot follows point ($\text{d}_{p}$); the last corresponds to point ($\text{e}_{p}$). Streamlines are superposed either to vorticity $\unicode[STIX]{x1D714}$ (a), or to $\unicode[STIX]{x1D735}y_{r}\boldsymbol{\cdot }\unicode[STIX]{x1D735}\unicode[STIX]{x1D703}$ (b).

Figure 17

Figure 16.Time evolution of the energy transfer rates. From (a) to (c) normalised $Nu_{vol}/\overline{Nu}$, $(\unicode[STIX]{x1D716}+1)/\overline{Nu}$, $\unicode[STIX]{x1D6F7}_{d}/\overline{Nu}$, $\unicode[STIX]{x1D6F7}_{b1}/\overline{Nu}$ for $(Ra=5\times 10^{7},Pr=3.0)$. Figure for $L_{2D}/\overline{|L_{2D}|}$ is given as a reference curve. (a) Corresponds the generic reversal: the curve shown by a black line corresponds to the average, while the hatched region represent one standard deviation from this average. (b) and (c) correspond to particular reversals displayed by an orange line alongside the standard deviation.

Figure 18

Figure 17.Instantaneous fields for a particular reversal cycle taken at regular intervals during the early release phase at $(Ra=5\times 10^{7},Pr=3.0)$. The first (respectively last) snapshot follows point ($\text{a}_{p}^{\prime }$) (respectively precedes point ($\text{b}_{p}^{\prime }$)). Streamlines are superposed to field $2\unicode[STIX]{x1D626}_{ij}\unicode[STIX]{x1D626}_{ij}$ the value of which is given by the colour. Corresponding values of $\unicode[STIX]{x1D716}$ and $\unicode[STIX]{x1D6F7}_{d}$ below each snapshot.

Figure 19

Figure 18.Time evolution of the angular impulse transfer rates for $(Ra=5\times 10^{7},Pr=3.0)$. From (a) to (c): evolution of $M/\overline{|M|}$, $(M-I_{b})/\overline{|M|}$, and $I_{a}/\overline{|M|}$. Figure for $L_{2D}/\overline{|L_{2D}|}$ is given as a reference curve. (a) Corresponds to the generic reversal: the average curve is displayed by a black line and the hatched region represents one standard deviation from this average. (b) and (c) depict two particular reversal cycles.

Figure 20

Figure 19.Instantaneous fields for a particular reversal cycle taken at regular intervals during the accumulation phase at $(Ra=5\times 10^{7},Pr=3.0)$. The first (respectively last) snapshot follows point ($\text{e}_{p}$) (respectively precedes point ($\text{a}_{p}^{\prime }$)). Streamlines are superposed to field $0.5(\boldsymbol{x}\boldsymbol{\cdot }\boldsymbol{x})\unicode[STIX]{x2202}_{x}\unicode[STIX]{x1D703}$ (the value is provided by the colour code). Corresponding values of $M$ and $I_{a}$ are given below each snapshot.

Figure 21

Figure 20.Linear stability analysis of the generic fields for ($Ra=5\times 10^{7}$, $Pr=3.0$). (a) Placement of the different values of $t_{o}$ with respect to the generic $L_{2D}$ and $E_{apot}$ curves. (b) Evolution of the energy of the normalised velocity and temperature perturbations for different base states (or equivalently $t_{o}$). Growth rate $\unicode[STIX]{x1D70E}$ measured for different values of $t_{o}$: ▵ (green) $\unicode[STIX]{x1D70E}=0.009$, ▴ (green) $\unicode[STIX]{x1D70E}=0.005$, ▫ (cyan) $\unicode[STIX]{x1D70E}=0.005$, ▪ (magenta) $\unicode[STIX]{x1D70E}=0.006$, ○ (orange) $\unicode[STIX]{x1D70E}=0.011$, ● (orange) $\unicode[STIX]{x1D70E}=0.250$; (c) streamlines corresponding to field $\boldsymbol{u}^{o}(x,y,t_{o})$ superposed to base state $\unicode[STIX]{x1D703}^{o}(x,y,t_{o})$ shown for two values of $t_{o}$: ○ (orange) located between points (f) and (g) and ● (orange) located on point (g). (d) Disturbance field $\unicode[STIX]{x1D703}^{\prime }\unicode[STIX]{x1D703}^{\prime }(x,y,t)$ measured at the end of the curves corresponding to ○ (orange) and ● (orange).

Figure 22

Figure 21.(a,c) Normalised angular impulse $|L_{2D}|/\overline{|L_{2D}|}$ (a,b) and normalised kinetic energy $E_{kin}/\overline{|E_{kin}|}$ (c,d) for $(Ra=5\times 10^{7},Pr=3.0)$ as a function of $t_{o}$ characterising the base state and time $(t-t_{o})$. Each curve represents different initial conditions i.e. different $t_{o}$, where solid lines indicate when a flow reversal takes place (see text). (b,d) Evolution of modal coefficients $\hat{v}_{mn}$ from two initial conditions: before and at point (g).