Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T05:38:16.535Z Has data issue: false hasContentIssue false

Water impact of a surface-patterned disk

Published online by Cambridge University Press:  15 March 2021

Taehyun Kim
Affiliation:
Department of Mechanical Engineering, KAIST, Daejeon 34141, Republic of Korea
Donghyun Kim
Affiliation:
Department of Mechanical Engineering, KAIST, Daejeon 34141, Republic of Korea
Daegyoum Kim*
Affiliation:
Department of Mechanical Engineering, KAIST, Daejeon 34141, Republic of Korea
*
†Email address for correspondence: daegyoum@kaist.ac.kr

Abstract

This study experimentally investigates the effect of a surface pattern applied to a flat disk on the impact force during water entry. A macroscale mesh-like pattern with square holes is applied to the bottom surface of a flat disk, and the shape of the pattern and the falling speed of the disk are varied to find a universal parameter that characterizes the impact force. When a surface-patterned disk impacts a free surface, air is trapped inside the holes, and the subsequent compression and depressurization of the trapped air is accompanied by a rise and fall in the impact force. Under the cushioning effect of the trapped air, the peak of the impact force decreases and its period extends as the total volume of holes in the surface pattern increases. These changes are independent of the specific shape of the pattern. In contrast, the impulse exerted on the disk remains similar, regardless of the total volume of holes and the pattern. We conduct a simple theoretical analysis based on the added mass of the disk to estimate the impact force, and confirm the trends observed in our experiments.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.(a) Schematic diagram of experimental set-up. (b) Geometry of a surface-patterned disk. Square holes on the disk are positioned regularly with an identical distance $r$ between the holes.

Figure 1

Table 1.Geometric variables $D$, $r$, $d$ and $h$ (figure 1b) and impact speed $U$ of surface-patterned disks.

Figure 2

Figure 2.General impact force profiles for (a) a flat disk ($D = 50\ \textrm {mm}$) and (b) a surface-patterned disk ($D = 50\ \textrm {mm}$, $r = 1.8\ \textrm {mm}$, $d = 4.2\ \textrm {mm}$, $h = 2\ \textrm {mm}$) impacting a free surface at $U = 1.71\ \textrm {m}\,\textrm {s}^{-1}$. The impact duration $t_{imp}$ is defined as the time interval during which the impact force exceeds $0.2F_{max}$ and is discussed in § 3.4. High-speed images for the water entry of the two disks are provided in the supplementary movie 1 available at https://doi.org/10.1017/jfm.2021.123.

Figure 3

Figure 3.Maximum impact force $F_{max}$ for different surface-patterned disks with $D = 50\ \textrm {mm}$ at $U = 1.71\ \textrm {m}\,\textrm {s}^{-1}$ as a function of $A_{hole}$. Here $F_{max}$ for a 5 mm-thick flat disk is located at $A_{hole}=0$ in black solid circles ($\bullet$). (a) Cases with the same $r$ are shown in the same colour; $h = 2\ \textrm {mm}$ in all cases. (b) Cases with the same $h$ have the same shape: circles, $h = 2\ \textrm {mm}$; five-pointed stars, 3 mm; six-pointed stars, 4 mm. For detailed information on the dimensions, see table 1.

Figure 4

Figure 4.Coefficient of maximum impact force, $F_{max}/{\rho _w}cU A$, versus dimensionless total volume of holes, $V_{hole}/D^3$. The extreme case with the maximum hole volume is denoted by the black cross symbol ($\times$) for each of $h = 2$, 3 and 4 mm; the disk image in the figure is for $h = 3\ \textrm {mm}$. The cases of a 5 mm-thick flat disk, shown in black, are located at $V_{hole}/D^3 = 0$. The dashed line is a theoretical prediction from (3.14) derived in § 3.3 for the surface-patterned disks.

Figure 5

Figure 5.Visualization of air bubbles beneath a surface-patterned disk upon water entry in (a) bottom view and (b) side view: $D = 50\ \textrm {mm}$, $r = 3.8\ \textrm {mm}$, $d = 4.2\ \textrm {mm}$, $h = 2\ \textrm {mm}$, and $U = 1.71\ \textrm {m}\,\textrm {s}^{-1}$. In the bottom view, the focal plane of the images is set near the free surface. Thus, in panels (av, avi), the images become blurred after the disk has passed the focal plane. See supplementary movies 2 and 3. The times are (ai) $t = 0.00\ \textrm {ms}$, (aii) $t = 0.45\ \textrm {ms}$, (aiii) $t = 1.15\ \textrm {ms}$, (aiv) $t = 1.80\ \textrm {ms}$, (av) $t = 11.90\ \textrm {ms}$, (avi) $t = 19.65\ \textrm {ms}$, (bi) $t = 0.35\ \textrm {ms}$, (bii) $t = 1.25\ \textrm {ms}$, (biii) $t = 4.00\ \textrm {ms}$, (biv) $t = 9.25\ \textrm {ms}$, (bv) $t = 15.00\ \textrm {ms}$, (bvi) $t = 20.60\ \textrm {ms}$.

Figure 6

Figure 6.(a) Profile of impact force for a surface-patterned disk ($D = 50\ \textrm {mm}$, $r = 1.8\ \textrm {mm}$, $d = 10.2\ \textrm {mm}$, $h = 2\ \textrm {mm}$ and $U = 1.71\ \textrm {m}\,\textrm {s}^{-1}$) and corresponding images of the bottom surface focusing on four holes at the disk centre (bottom view). (b) Schematic diagrams of the dynamics of air bubbles inside the holes. The grey block and the white area denote a surface pattern and a single hole, respectively. Subpanels (i–vi) in panel (a) correspond to subpanels (i–vi) in panel (b). See supplementary movie 4 for panel (a).

Figure 7

Figure 7.Schematic diagram after impact. (a) After the impact, air is trapped and compressed inside the hole. The mean depth of water penetration inside the hole is denoted as $x(t)$. (b) Added mass of the disk is pushed downward with an effective speed of $U_{eff}(=U_v-A_{hole}\dot {x}/A)$.

Figure 8

Figure 8.(a) Mean absolute percentage error between experimental and theoretical values of the maximum impact force $F_{max}$ as a function of $\bar {p}_c/p_0$. (b) Comparison between experimental and theoretical values of the maximum impact force coefficient $F_{max}/{\rho _w}cU A$ for $\bar {p}_c/p_0=1$.

Figure 9

Figure 9.Time history of the impact force for a surface-patterned disk: (a) $V_{hole}/D^3 = 0.014$ ($D = 50\ \textrm {mm}$, $r = 1.8\ \textrm {mm}$, $d = 4.2\ \textrm {mm}$, $h = 2\ \textrm {mm}$ and $U = 1.71\ \textrm {m}\,\textrm {s}^{-1}$); (b) $V_{hole}/D^3 = 0.025$ ($D = 50\ \textrm {mm}$, $r = 1.8\ \textrm {mm}$, $d = 6.2\ \textrm {mm}$, $h = 3\ \textrm {mm}$ and $U = 1.71\ \textrm {m}\,\textrm {s}^{-1}$). The red dashed line is given by (3.13) with a phase shift that matches the phase of the peak.

Figure 10

Figure 10.(a) Dimensionless impulse $I/MU$ versus $V_{hole}/D^3$ for two different disk diameters, $D = 50\ \textrm {mm}$ and 30 mm. (b) Maximum impact force coefficient $F_{max}/{\rho _w}cU A$ versus dimensionless impact duration $t_{imp}/(D/c)$. In panels (a,b), the dashed line shows the theoretical prediction, $I/MU =\rho _w D^3/6M$ and (3.15). The notation of the symbols is the same as in figure 4.

Figure 11

Figure 11.(a) Dimensionless impact duration $t_{imp}/(D/c)$ as a function of $V_{hole}/D^3$. The notation of the symbols is the same as in figure 4. The dashed line is given by (3.16). (b–d) Comparison of time at which the volume of the air bubbles that have escaped from the centre holes reaches a maximum for three surface-patterned disks with $V_{hole}/D^3$ = 0.008, 0.018 and 0.027, respectively ($D = 50\ \textrm {mm}$ and $U = 1.71\ \textrm {m}\,\textrm {s}^{-1}$).

Figure 12

Figure 12.(a) Three types of surface patterns. All disks have the same $D = 50\ \textrm {mm}$ and $h = 2\ \textrm {mm}$. (b) Maximum impact force coefficient $F_{max}/{\rho _w}cU A$ versus dimensionless total volume of holes $V_{hole}/D^3$ for the three pattern types. As a reference, disks with regular square holes ($r = 3.8\ \textrm {mm}$) from figure 4 are included. The dashed line is given by (3.14).

Kim et al. supplementary movie 1

Movie 1 for figure 2

Download Kim et al. supplementary movie 1(Video)
Video 4.7 MB

Kim et al. supplementary movie 2

Movie 2 for figure 5a

Download Kim et al. supplementary movie 2(Video)
Video 14.7 MB

Kim et al. supplementary movie 3

Movie 3 for figure 5b

Download Kim et al. supplementary movie 3(Video)
Video 40.6 MB

Kim et al. supplementary movie 4

Movie 4 for figure 6

Download Kim et al. supplementary movie 4(Video)
Video 6.6 MB