Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T19:24:01.630Z Has data issue: false hasContentIssue false

The modulation of coherent structures by the near-wall motions of particles

Published online by Cambridge University Press:  23 February 2024

Yuen Feng
Affiliation:
Center for Particle-Laden Turbulence, Lanzhou University, Lanzhou 730000, PR China
Hongyou Liu*
Affiliation:
Center for Particle-Laden Turbulence, Lanzhou University, Lanzhou 730000, PR China
Xiaojing Zheng
Affiliation:
Research Center for Applied Mechanics, Xidian University, Xi'an 710071, PR China
*
†Email address for correspondence: liuhongyou@lzu.edu.cn

Abstract

Particle–wall interaction generates strong particle near-wall motion, including collision bounce and impact splashing. To distinguish the effect of particles and particle near-wall motions on the turbulent coherent structure, this study carried out three different cases of sand-laden two-phase flow measurements: a uniform sand release at the top, local-laying sand bed and global-laying sand bed (Liu et al., J. Fluid Mech., vol. 943, 2022, A8). Based on large field of view particle image velocimetry/particle tracking velocimetry measurements, we obtained the velocity field of a two-dimensional gas–solid two-phase dilute faction flow $(\varPhi _{v} \sim O(10^{-4}))$ with a friction Reynolds number $R e_{\tau }$ of 3950. Results indicate that particles weaken the high- and low-velocity iso-momentum zones and hairpin vortices, resulting in the increased length scale of the coherent structure. However, the collision bounce and impact splashing break up the inner iso-momentum zone and hairpin vortices while enhancing them in the outer region, thus reducing the structure scale. In addition, the upward-moving particles increase the large-scale structure inclination angle, while the downward-moving particles decrease it. The linear coherence spectrum analysis suggests that the particles themselves do not change the structural self-similarity, but their saltation motions disrupt the similarity of the near-wall structure, making the inclination angle decrease with the scale, and the generated ascending particles reduce the aspect ratio of the streamwise to wall-normal direction in the outer region.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Experimental set-up: schematic diagram of experimental settings for (a) uniform top-release sand from the ceiling of the tunnel, (b) local-laying sand bed and (c) global-laying sand bed.

Figure 1

Table 1.Key boundary layer parameters of the sand-free and sand-laden flows. The friction velocity and the aerodynamic roughness lengths were obtained by the Clauser method.

Figure 2

Figure 2.Particle distributions at different inner-scaled wall-normal distances: (a) particle volume fraction $\varPhi _v$ normalised with the integrated concentration over $y^+$ (denoted as $\varPhi _{total}$); (b) the ratio $n_{up}/(n_{up}+n_{down})$, where $n_{up}$ and $n_{down}$ are the numbers of ascending and descending particles, respectively.

Figure 3

Figure 3.The streamwise instantaneous velocity clouds for cases 1–4; these are displayed in (a–d), respectively.

Figure 4

Figure 4.Two-point cross-correlation of streamwise velocity fluctuations at a reference height $y_ {ref} \approx 0.03 \delta$ ($y_{ref}^+=120$) for case 1–case 4 illustrated in (a–d), respectively. Contour levels are from $R_{ uu}=0.15$ to $0.95$ in increments of 0.2.

Figure 5

Figure 5.Two-point cross-correlation of streamwise velocity fluctuations at a reference height $y_ {ref}= 0.55\unicode{x2013}0.6 \delta$. Cases 1–4 are illustrated in (a–d), respectively. The contour levels are from $R_{uu}=0.15$ to 0.95 in increments of 0.2.

Figure 6

Figure 6.The Galilean decomposition of this instantaneous field is based on a convection velocity of $0.8 U_{\infty }$. Instantaneous hairpin vortex maps for four cases; cases 1–4 are displayed in (a–d), respectively.

Figure 7

Figure 7.Prograde and retrograde vortex population densities in the outer scaling for cases 1–4.

Figure 8

Figure 8.The j.p.d.f.s at $y/\delta = 0.045\unicode{x2013}0.05$ ($y^+=197.5$) and $y/\delta = 0.16\unicode{x2013}0.20$ ($y^+=790$) for the two-dimensional velocities in the particle-laden flows. Panels (a–c) represent the results of cases 2–4, respectively. The corresponding probability in each quadrant is shown to reflect the joint contribution of the entire quadrant.

Figure 9

Figure 9.(a) Autocorrelation of the particle-free velocity fluctuations at the reference height ($y_{ref}=0.05 \delta$). The circles, stars and triangles are the results of the Hutchins & Marusic (2007) at friction Reynolds numbers of 7610, 14 380 and 19 960, respectively. (b) Variation in the structure length scale with height in four cases. The results of case 1–case 4 are represented by the black circle, blue square, pink triangle and red diamond in the diagram, respectively. The grey hexagons indicate the results of Hutchins & Marusic (2007) at $Re_{\tau } =7610$, while grey pentagrams and crosses indicate the result of Tutkun et al. (2009) at $Re_{\tau } =3745$ and 7250.

Figure 10

Figure 10.(a) Correlation between the velocity fluctuations at different heights and velocity fluctuations at reference points ($y_{ref}=0.05 \delta$). (b) Variation in the structure inclination with height at different reference points. The results of case 1–case 4 are represented by the black circle, blue square, pink triangle and red diamond in the diagram, respectively.

Figure 11

Figure 11.The LCS of the velocity fluctuation in case 1 at $y/\delta = =0.05 \delta$, with the filtered LCS (${\gamma _{l}^{2}}_{ filter}$, solid blue line) constructed from the original LCS (${\gamma _{l}^{2}}_{raw}$, solid grey line) using a $30\,\%$ BMF.

Figure 12

Figure 12.Variations in the turbulent LCSs at different heights for different reference heights $(\kern0.7pt y_{ref}= 0.03\delta, 0.10\delta, 0.15\delta$ and $0.20\delta$). The gradient colour solid lines illustrate LCSs from 0.05$\delta$ to 0.35$\delta$. The blue dashed, dotted and dash dotted lines represent the equations: $\gamma _l^2=0.302 \ln (\lambda _{x}/\Delta y)-0.795$, $\gamma _l^2=0.302 \ln (\lambda _{x}/\Delta y)-0.755$ and $\gamma _l^2=0.302 \ln (\lambda _{x}/\Delta y)-0.72$, respectively. Cases 1–4 are displayed in (a–d), respectively.

Figure 13

Figure 13.Case 1 with $y=0.05 \delta$ for the particle-free condition: (a) system phase expressed as an angle and (b) filtered phase expressed as a physical inclination angle to 30 % BMF and then truncated by a wavelength of $\lambda _{xT}=0.8 \delta$. The red dashed line presents the truncated wavelength, the blue line represents the smoothed angle and the solid grey line shows the raw result.

Figure 14

Figure 14.(a) Inclination at different scales for the same height $({y}=0.05 \delta )$ for the four cases, with black, blue, pink and red solid lines for cases 1, 2, 3 and 4, respectively. (b) Inclination at different scales $(\lambda _{x} / \delta \approx 4,2,1)$ for the four cases as a function of height, with each case having a $15^{\circ }$ increment over the previous case. The black, blue, pink and red lines show the results for cases 1, 2, 3 and 4, respectively, while the solid, dashed and dotted lines represent the inclination of the structure for scales $\lambda _{x} / \delta \approx 4, 2$ and 1, respectively.

Supplementary material: File

Feng et al. supplementary movie

The particle trajectories on the erodible wall recorded by the high-speed photography.
Download Feng et al. supplementary movie(File)
File 5.2 MB