Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T13:16:51.998Z Has data issue: false hasContentIssue false

Advances in ice radar studies of a temperate alpine glacier, South Cascade Glacier, Washington, U.S.A.

Published online by Cambridge University Press:  20 January 2017

Andrew G. Fountain
Affiliation:
U.S. Geological Survey, P. O. Box 25046, MS-412, Denver, CO 80225, U.S.A.
Robert W. Jacobel
Affiliation:
Department of Physics, St Olaf College, Northfield, MN 55057, U.S.A.
Rights & Permissions [Opens in a new window]

Abstract

South Cascade Glacier, Washington, U.S.A., is one of the most extensively studied glaciers in the Western Hemisphere. In addition to mass-balance measurements, which date to 1958, numerous hydrological investigations have been carried out during the last three decades, and repeated ice-thickness determinations have been made using a variety of techniques. In the late 1960s, the basal topography was initially determined by gravitimetric methods. In the mid-1970s some of the fist depth measurements using radar on temperate ice were made. The basal topography was remapped soon after from a series of point radar measurements and boreholes drilled to the glacier bottom. During the 1990s, the ice thickness was remapped using digital recording of continuous profiles that obtained over 5000 ice-thickness measurements. Profiles have been corrected for the finite beamwidth of the antenna radiation pattern and reflections in steep terrain, resulting in a significantly improved depiction of the basal surface and internal structures. The map based on our recent radar profiles confirms the large-scale features of the basal topography previously depicted and reveals more structural detail. A bright reflector was detected at the base of the glacier and could be traced in adjacent profiles. Comparison with results from water-level measurements in boreholes drilled to the bed indicates that the reflector is a subglacial conduit.

Information

Type
Research Article
Copyright
Copyright © The Author(s) 1997 
Figure 0

Fig. 1.The path of radar profiles superimposed on an outline of South Cascade Glacier as it was in 1985 (Krimmel, 1989). The square box outlines a grid region with closely spaced profiles (not shown). Areas of the glacier with no profiles are highly crevassed regions where the profiling radar could not be deployed.

Figure 1

Fig. 2.(a) Typical example of a raw radar profile showing echoes from the bed and internal scattering sources, (b) Same profile after migration.

Figure 2

Fig. 3.Elevation of the basal topography at South Cascade Glacier, in meters above mean sea level, for different mappings, (a) Basal topography based on radar profiling 1990–94 (this study). (b) Basal topography based on drilling and point radar soundings made in 1975 (Hodge, 1979). (c) Basal topography based on gravimetric measurements made in 1968 (Krimmel, 1970). The differences in glacier outline are due to glacier thinning. The contours for maps (b) and (c) were interpolated from the originals to provide 50 m interval.

Figure 3

Fig. 4.(a) Radar profile 22, after migration, near the western margin. (b) A subsection of Figure 1 showing the path on the glacier surface of the radar profiles (numbered) used to trace the conduit. The view is upside down compared to that of the previous figures, such that the relation to the radar profile is correct. The thick gray line crossing each of the profiles is the inferred location of a subglacial reflector thought to be a conduit. Large dots indicate the location of boreholes drilled in 1987.