Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T18:29:56.602Z Has data issue: false hasContentIssue false

Relaxation Phenomena in GaN/ AlN/ 6H-SiC Heterostructures

Published online by Cambridge University Press:  13 June 2014

N.V. Edwards
Affiliation:
Linköping universitet, Materiefysik, Linköping, Sverige, S-58183ginger@ifm.liu.se
A.D. Batchelor
Affiliation:
Analytical Instrumentation Facility, Box 7531, N.C. State University, Raleigh, NC, USA 27695
I.A. Buyanova
Affiliation:
Linköping universitet, Materiefysik, Linköping, Sverige, S-58183
L.D. Madsen
Affiliation:
Linköping universitet, Materiefysik, Linköping, Sverige, S-58183
M.D. Bremser
Affiliation:
North Carolina State University, Raleigh, NC, USA 27695Now at Aixtron Inc., 1569 Barclay Blvd., Buffalo Grove, IL, USA 60089
R.F. Davis
Affiliation:
North Carolina State University, Raleigh, NC, USA 27695
D.E. Aspnes
Affiliation:
North Carolina State University, Raleigh, NC, USA 27695
B. Monemar
Affiliation:
Linköping universitet, Materiefysik, Linköping, Sverige, S-58183

Abstract

We have developed a method to modulate the strain state (normally > 4 kbar, tensile) of moderately thick (∼2 μm) GaN based structures grown on 6H-SiC to a range 0 to -2 kbar of compressive stresses by introducing a strain-mediating layer (SML) above the standard high-temperature AlN buffer layer. The strain characteristics of subsequently deposited nitride layers can be modulated by changing the growth parameters of the SML layer. This is achieved by in-situ techiniques during crystal growth without degrading the optical and structural properties of the deposited layers.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig. 1.Structure, compositions, layer thicknesses, and growth parameters common to all SML samples.

Figure 1

Fig. 2.EA and σXX vs. thickness d for GaN films on 6H-SiC. Points [•] represent samples without strain mediating layers (SML); X’s represent samples with SMLs.

Figure 2

Figs. 3a and b.Lower magnification SEM micrograph of Sample 1, left. Right shows high magnification view of the buffer layer/ SML/ overlying GaN film interfaces for the same sample.

Figure 3

Fig. 4.(a) Low magnification view of Sample 2 (with SML); (b) Buffer layer/ film interface at high magnification of the Sample 2; (c) Low magnification view of Sample 3 (with SML); (d) Low magnification view of Sample 4 (with SML); (e) Low magnification view of Sample 5 (without SML).

Figure 4

Fig. 5.SPM micrograph of the surface of Sample 4 (with SML). Image rms roughness was 2.7Å; rms roughness boxed region is 0.15Å

Figure 5

Fig. 6.SPM micrograph of the surface of Sample 5 (without SML). Image rms inroughness was 2.61Å; rms roughness .in boxed region is 1.48Å.

Figure 6

Fig. 7.Representative broadband PL spectrum of SML containing samples. (Sample 4)