Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T05:38:17.267Z Has data issue: false hasContentIssue false

Influence of nozzle external geometry on wavepackets in under-expanded supersonic impinging jets

Published online by Cambridge University Press:  27 October 2021

Shahram Karami*
Affiliation:
Laboratory for Turbulence Research in Aerospace & Combustion (LTRAC), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne 3800, Australia
Julio Soria
Affiliation:
Laboratory for Turbulence Research in Aerospace & Combustion (LTRAC), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne 3800, Australia
*
†Email address for correspondence: shahram.karami@monash.edu

Abstract

In this study, large-eddy simulations are utilised to unravel the influence of the nozzle's external geometry on upstream-travelling waves in under-expanded supersonic impinging jets. Three configurations, a thin-lipped, a thin-lipped with a sponge and an infinite-lipped nozzle are considered with the other non-dimensionalised geometrical and flow variables identical for the three cases. Spectral proper orthogonal decomposition is applied to the Mack norm, i.e. the energy norm based on the stagnation energy, to obtain the spatial modes at their corresponding frequency. The spectral decomposition of the spatial modes at optimal and suboptimal frequencies is used to isolate the wavepackets into upstream- and downstream-propagating waves based on their phase velocity. It is found that the external geometry of the nozzle has a significant influence on the first-order statistics even though the governing non-dimensional parameters are the same for all three cases. Multiple peaks emerge in the energy spectra at distinct frequencies corresponding to axisymmetric azimuthal modes for each case. The downstream-propagating wavepackets have a high amplitude at the shear layer of the three jets with the mode shapes resembling Kelvin–Helmholtz instability waves, while the upstream-travelling wavepackets exist in the three regions of the near field, shear layer and inside of the jet. The barrel shock at the nozzle exit appears as a flexible shield, which prevents upstream-travelling waves from reaching the internal region of the nozzle, where the upstream-travelling waves travel obliquely with one side of the wavefront is crawling on the reflected shock while the other side is guided by the shear layer. These latter waves can reach the nozzle lip via inside of the jet. The spectral decomposition of the spatial modes at optimal and suboptimal frequencies show that all three forms of the near field, shear layer and inside jet upstream-travelling wavepackets contribute to the receptivity process while their contributions and strength are altered by the change of the external geometry of the nozzle.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Schematic of the three configurations with the thin-lipped nozzle lip with reflecting surface (a), the thin-lipped nozzle lip with the sponge region to tapper reflected acoustic waves (b) and the infinite-lipped nozzle (c) (it is noted that the configuration is axisymmetric, hence only the $x$–$r$ plan view at $\theta = 0$ is shown).

Figure 1

Figure 2.Schematic of the domain of the simulation with different regions highlighted (it is noted that the configuration is axisymmetric, hence only the $x$–$r$ plan view at $\theta = 0$ is shown).

Figure 2

Table 1.Lengths and grid points for each block in the computational domain as depicted in figure 2. All dimensions are normalised with the nozzle diameter $d$.

Figure 3

Figure 3.Contour plots of ensemble-averaged streamwise velocity (a–c), radial velocity (d–f) and pressure (g–i) for the thin-lipped nozzle (a,d,g), thin-lipped nozzle with the sponge (b,e,h) and infinite-lipped nozzle (c,f,i).

Figure 4

Figure 4.The SPOD eigenvalue spectra of the first three azimuthal mode numbers normalised by cumulative energy of these azimuthal modes for the thin-lipped nozzle (a), thin-lipped nozzle with the sponge (b) and infinite-lipped nozzle (c).

Figure 5

Figure 5.Four dominant SPOD modes of the streamwise velocity (a,c,e,g) and the local speed of sound (b,d, f,h) for the first azimuthal wavenumber ($m =0$) for the thin-lipped nozzle.

Figure 6

Figure 6.Four dominant SPOD modes of the streamwise velocity (a,c,e,g) and the local speed of sound (b,d, f,h) for the first azimuthal wavenumber ($m =0$) for the thin-lipped nozzle with the sponge.

Figure 7

Figure 7.Four dominant SPOD mode of the streamwise velocity (a,c,e,g) and the local speed of sound (b,d, f,h) for the first azimuthal wavenumber ($m =0$) for the infinite-lipped nozzle.

Figure 8

Figure 8.Streamwise and radial velocities and local speed of sound wavenumber spectra at the dominant frequency for three cases: thin-lipped nozzle (a,d,g), thin-lipped nozzle with the sponge (b,e,h) and infinite-lipped nozzle (c, f,i). The dotted green and yellow vertical lines denote the speed of sound in the upstream and downstream directions, respectively. Negative wavenumbers correspond to waves travelling in the upstream direction and positive wavenumbers correspond to waves travelling downstream.

Figure 9

Table 2.Convection velocity of the coherent structures.

Figure 10

Figure 9.Amplitude of the local speed of sound fluctuations decomposed into the downstream-travelling (a–c) and upstream-travelling (d–f) components determined from the leading SPOD mode. All values are normalised with respect to the maximum downstream-travelling component. The dashed white lines are the isocontours of the non-dimensionalised mean velocity magnitude of 0.2, and the solid-white line is the intercepting, or barrel, shock.

Figure 11

Figure 10.The local speed of sound at the leading SPOD mode decomposed into the components with positive (a–c) and negative (d–f) phase velocity for the thin-lipped nozzle (a,d), thin-lipped nozzle with the sponge (b,e) and infinite-lipped nozzle (c, f). The dashed lines are the isocontours of the non-dimensionalised mean velocity magnitude of 0.2 and the solid line is the intercepting, or barrel, shock.

Figure 12

Figure 11.Proposed paths of the travelling aeroacoustic waves that contribute to the feedback loop as the origin of the upstream acoustic wavepackets changes. The barrel and reflected shocks are shown schematically with solid blue lines. The propagation direction of the wavefront that is crawling on the reflected shock on one side and is guided by the shear layer on the other side is marked with a solid cyan arrow.

Figure 13

Figure 12.Radial distribution of the upstream-travelling waves (the local speed of sound component) at optimal and suboptimal frequencies and at $x/d = 0.25$ for the thin-lipped nozzle (a), the thin-lipped nozzle with the sponge (b) and the infinite-lipped nozzle (c).

Figure 14

Figure 13.Radial distribution of the downstream-travelling waves (the local speed of sound component) at optimal and suboptimal frequencies at $x/d = 0.25$ for the thin-lipped nozzle (a), thin-lipped nozzle with the sponge (b) and infinite-lipped nozzle (c).

Figure 15

Figure 14.Instantaneous contours of the total energy fluctuation fields of the pressure impulse simulations for the impulses located at $(R_p, \theta _p)$ of (1.2, $-20^{\circ }$) for case $C_1$, at (1.2, $0^{\circ }$) for case $C_2$, at (1.2, $45^{\circ }$) for case $C_3$ and at (0.8, $-20^{\circ }$) for case $C_4$.

Karami and Soria supplementary movie 1

Three animations of the density gradient
Download Karami and Soria supplementary movie 1(Video)
Video 57.6 MB

Karami and Soria supplementary movie 2

Instantaneous contours of the total energy fluctuation fields of the pressure impulse simulations.

Download Karami and Soria supplementary movie 2(Video)
Video 7.4 MB