Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T16:27:43.854Z Has data issue: false hasContentIssue false

On the interfacial instabilities of a ventilation cavity induced by gaseous injection into liquid crossflow

Published online by Cambridge University Press:  06 February 2024

Chengwang Xiong
Affiliation:
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, PR China
Shengzhu Wang
Affiliation:
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, PR ChinaMarine Design and Research Institute of China, Shanghai 200011, PR China
Qianqian Dong
Affiliation:
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, PR ChinaCollege of Aerospace and Civil Engineering, Harbin Engineering University, Harbin 150001, PR China
Shi-Ping Wang
Affiliation:
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, PR China
A-Man Zhang*
Affiliation:
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, PR China
*
†Email address for correspondence: zhangaman@hrbeu.edu.cn

Abstract

This study gives insights into the interfacial instabilities of a ventilation cavity by injecting gas vertically into the horizontal liquid crossflow through both numerical and experimental investigations. We identified four distinct regimes of the ventilation cavity based on their topological characteristics: (I) discrete bubble, (II) continuous cavity, (III) bifurcated cavity, and (IV) bubble plume. The boundaries for these regimes are delineated within the parameter space of crossflow velocity and jet speed. A comprehensive analysis of the flow characteristics associated with each regime is presented, encompassing the phase mixing properties, the dominant frequency of pulsation, and the time-averaged profile of the cavity. This study conducted a detailed investigation of the periodic pulsation at the leading-edge interface of the cavity, also known as the ‘puffing phenomenon’. The results of local spectral analysis and dynamic mode decomposition indicate that the high-frequency instability in the near-field region exhibits the most significant growth rate. In contrast, the low-frequency mode with the largest amplitude spans a broader region from the orifice to the cavity branches. A conceptual model has been proposed to elucidate the mechanism behind the pulsation phenomenon observed along the cavity interface: the pulsation results from the alternate intrusion of the crossflow and the cavity recovery at the leading edge, being governed mainly by the periodic oscillating imbalance between the static pressure of gas near the orifice and the stagnation pressure of crossflow at the leading edge.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Schematic diagram of the computational set-ups in the near field, with a no-slip top wall, slip bottom wall, inlet and outlet boundary for crossflow, and the inlet for gas injection. Here, $Q_v$ and $D$ represent the gas volume flow rate and the orifice diameter of the injector, respectively, and $U_\infty$ and $\delta _0$ denote the free-stream velocity and boundary layer thickness at the inlet, respectively. The boundary layer thickness at the inlet, $\delta _0$, is defined as the vertical displacement between the top wall and the position where the local streamwise velocity satisfies $u=0.99U_\infty$. The size of the computational domain is $L_x\times L_y\times L_z = 1.2\ {\rm m} \times 1.0\ {\rm m} \times 0.5\ {\rm m}$.

Figure 1

Table 1.Physical conditions and dimensionless parameters of each case in the present numerical simulations.

Figure 2

Figure 2.Schematic diagram of the experimental set-ups.

Figure 3

Table 2.Physical and dimensionless parameters of experimental tests.

Figure 4

Table 3.Abbreviations for four distinct flow regimes of the ventilation cavity and three transitional regimes.

Figure 5

Figure 3.The typical instantaneous cavity topology in four regimes obtained by numerical simulations, from both the side and plan views: (a) bifurcated cavity (BC, case 1); (b) continuous cavity (CC, case 2); (c) bubble plume (BP, case 3); (d) discrete bubbles (DB, case 4).

Figure 6

Figure 4.The distribution of gas volume fraction on the centre plane, corresponding to the four regimes (cases 1–4) shown in figure 3. The solid black curves indicate the time-averaged boundary of the cavity in the BC and CC regimes.

Figure 7

Figure 5.Classification of flow regimes of gaseous injection into liquid crossflow through experimental observations for the orifice diameters of (a) $D = 1$ mm and (b) $D = 2$ mm. Here, BD-TR, CC-TR and BC-TR represent the transitional statuses between the adjacent flow regimes.

Figure 8

Table 4.Coefficients of the fitted transitional curves with the functional expression $y=A_{1}\, {\rm e}^{A_{2}x}$, as shown in figure 5. Here, $R^2$ denotes the coefficient of determination for these fitted curves.

Figure 9

Figure 6.A comparison of the instantaneous cavity morphologies between the typical regimes and transitional regimes through experimental observations for $D = 1$ mm.

Figure 10

Figure 7.A comparison of the instantaneous cavity morphologies of the numerical simulations with the same momentum flux ratio $J=0.54$ but different orifice diameters: (a) $D=1$ mm, case 5; (b) $D=2$ mm, case 6; and (c) $D=5$ mm, case 7.

Figure 11

Figure 8.Boundary layer profiles upstream to the orifice obtained from PIV results and their influence on cavity evolution. (a) Snapshot of the velocity vector field at $(U_\infty, U_j)=(0.75\ {\rm m}\ {\rm s}^{-1}, 4.0\ {\rm m}\ {\rm s}^{-1})$. (b) Time-averaged velocity profile of boundary layer normalized to facilitate comparison with analytical solutions, with the boundary layer thickness $\delta _{0}\approx 3.0$, 3.2, 4.9 and 6.0 mm, corresponding to Experiments 1–4, respectively. Numerical results of (c) case 8 and (d) case 9, as detailed in table 1, where the exact velocity profiles extracted from the PIV test were employed as inlet boundary condition.

Figure 12

Figure 9.The time-averaged contours of the cavity along the streamwise direction obtained from the numerical simulations: (a) case 1, BC; (b) case 2, CC; and (c) case 3, BP.

Figure 13

Figure 10.The quantification of the two-phase mixing extent along the streamwise direction based on the numerical results of cases 1–3, where $S_g$ and $C_g$ denote the area and the interfacial perimeter of the cavity on the streamwise cross-section, respectively.

Figure 14

Figure 11.(a)–(d) Time history of the gas pressure at the jet inlet of the numerical results of cases 1–4, where the horizontal and vertical axes have been normalized by $t^*=tU_\infty /D$ and $p^*=p/(\rho _\infty U^2_\infty )$. (e) The spectral diagrams of normalized frequency of jet inlet pressure $f^*=f\kern 0.03em D/u_\infty$, where the amplitude has been normalized by $\tilde {A}_p=(A_p-\bar {P})/ \sigma$. Here, $\bar {P}$ denotes the time-averaged pressure and $\sigma$ denotes the standard deviation. The dashed line marks the dominant frequency of the largest amplitude for each case.

Figure 15

Figure 12.(a–c) Comparison of the time-averaged distribution of static pressure $\bar {P}_{{sta}}$ (upper side) and the planar dynamic pressure $\bar {P}_{{dyn}}$ (lower side) at the slice $z/D_0=-0.3$ for cases 1–3. The mean cavity interface and streamlines are also denoted by the black and white solid lines. (d–f) The corresponding contours of mean spanwise vorticity $\bar {\omega }_y$ along with the cavity interface at the slice $y/D_0=0$.

Figure 16

Figure 13.Instantaneous contours of static pressure inside the cavity $P_{{sta}}$ for case 4 at $tU_\infty /D_0$ values (a) 11.1, (b) 14.1 and (c) 14.7. The greyscale interface denotes the curvature on the bubble surface. The top views at the corresponding instants of bubble development from experimental observations are also shown on the right-hand side, whose animation is also provided in supplementary movie 1, available at https://doi.org/10.1017/jfm.2024.23.

Figure 17

Figure 14.Instantaneous cavity interface of (a) case 1, (b) case 8 and (c) case 9, with the contour coloured by the magnitude of velocity.

Figure 18

Figure 15.The experimental observation of (a) the interface instability in the BC regime and (b) the close-up view of the wavy structures on the branch for $D=0.002$ m, $U_j=127.33$ m s$^{-1}$, $U_\infty =2$ m s$^{-1}$.

Figure 19

Figure 16.Instantaneous interface at the slice of $y/D_0=0$ at a series of time instants for (a) case 1, (b) case 8, and (c) case 9, with the movement of the Lagrangian points on the interface being monitored.

Figure 20

Figure 17.Spatial and temporal distributions of the wall-normal velocity along the time-averaged interface at the slice $y/D_0=0$ for (a) case 1, (b) case 8, and (c) case 9.

Figure 21

Figure 18.Local frequency spectrum of the wall-normal velocity measured on the different locations on the cavity interface of case 1, where the frequency is normalized by $f^*=f\kern 0.03em D/U_\infty$.

Figure 22

Figure 19.The spectrum of (a) the growth rate and (b) the amplitude of DMD modes for case 1, with the size and colour shading of the markers indicating the magnitude of the values for easy comparison.

Figure 23

Figure 20.Isosurfaces of two leading DMD modes from the temporal series of volume fraction fields: (a) the largest growth rate at a non-zero frequency $f^*=0.42$; and (b) the largest amplitude at a non-zero frequency $f^*=0.11$.

Figure 24

Figure 21.Schematic diagram to illustrate the development of the interfacial instability for the puffing phenomenon near the orifice, with the contours at the corners showing the static pressure at the corresponding instants.

Figure 25

Figure 22.(a) Comparison of the instantaneous dynamic pressure $P_{dyn,g}=\rho _{j} \boldsymbol {u}^2/2$ and static pressure $P_{sta,g}$ within the cavity at $(x, y, z)/D_0 = (0.0, 0.0, -0.5)$, and the total pressure of liquid crossflow, $P_{tot,l}=P_{sta,l}+\rho _\infty \boldsymbol {u}^2/2$, slightly ahead of the cavity at $(x, y, z)/D_0 =(-1.0, 0.0, -0.5)$, which were obtained from case 1. (b) Sketch of the pressure variation related to different stages of one period.

Figure 26

Figure 23.The leading frequency of puffing behaviour near the orifice with respect to different $U_j$ and $U_\infty$, which were obtained from experimental results for $D=1$ mm.

Figure 27

Figure 24.Snapshots of cavity topology development with an increase of $U_j$ at $U_\infty = 2 \ {\rm m}\ {\rm s}^{-1}$, $D=1$ mm, showing puffing instability at the higher $U_j$ values. The corresponding animation is provided in supplementary movie 3.

Figure 28

Table 5.Numerical parameters of mesh convergence study for case 1.

Figure 29

Figure 25.The validation tests for case 1: (a) the mesh convergence by a comparison of the time-averaged profile of cavity interface at $z=0$; (b) the convergence of the Courant number by a comparison of the frequency spectrum of the gas pressure at the jet inlet.

Figure 30

Figure 26.Comparison of the cavity topology between the experimental and present numerical results: (a) the experimental observation from Mäkiharju et al. (2017) and the present numerical visualization for case 1; (b) the sweep angle $\varphi$ from the experimental data of Lee (2015) and the present simulations, with the error bar indicating the fitting error of $\varphi$.

Figure 31

Figure 27.Comparison of the instantaneous cavity topology between the close-up view of the cavity obtained from the present experiment and the numerical results for $D=1$ mm, $U_\infty =3\ {\rm m}\ {\rm s}^{-1}$, $U_j=63.7\ {\rm m}\ {\rm s}^{-1}$.

Supplementary material: File

Xiong et al. supplementary movie 1

The animation of bubble development in DB regime, corresponding to case 4 in Table 1.
Download Xiong et al. supplementary movie 1(File)
File 24.6 MB
Supplementary material: File

Xiong et al. supplementary movie 2

The experimental and numerical obserbvations of interface instability in BC regime, corresponding to the cases shown in figure 15 and 14(a), respectively.
Download Xiong et al. supplementary movie 2(File)
File 13.4 MB
Supplementary material: File

Xiong et al. supplementary movie 3

The comparison of cavity topology develoment with an incresse of jet velocity, corresponding to figure 24.
Download Xiong et al. supplementary movie 3(File)
File 31.7 MB