Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T18:10:16.735Z Has data issue: false hasContentIssue false

The fluid dynamics of propagating fronts with solutal and thermal coupling

Published online by Cambridge University Press:  23 May 2022

S. Mukherjee
Affiliation:
Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA
M.R. Paul*
Affiliation:
Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA 24061, USA
*
†Email address for correspondence: mrp@vt.edu

Abstract

We numerically explore the propagation of reacting fronts in a shallow and horizontal layer of fluid. We focus on fronts that couple with the fluid due to density differences between the products and reactants and also due to heat release from the reaction. We explore fronts where this solutal and thermal coupling is cooperative or antagonistic. We quantify the fluid motion induced by the front and investigate the interactions of the front with the fluid as it propagates through quiescent, cellular and chaotic flow fields. The solutal coupling induces an extended convection roll that travels with the front, the thermal coupling due to heat release from the reaction generates a pair of convection rolls that travels with the front, and when both couplings are present there is a complex signature of these contributions. The details of the front dynamics depend significantly upon the interactions of the front-induced flow field with the fluid ahead of the front.

Information

Type
JFM Papers
Copyright
© The Author(s), 2022. Published by Cambridge University Press
Figure 0

Figure 1.The (a) two-dimensional and (b) three-dimensional domains used to study front propagation in a horizontal layer of fluid. Cartesian coordinates $(x,y,z)$ are shown with gravity $g$ opposing the $z$-direction. The bottom surface is hot (red) at $T_h$, the top surface is cold (blue) at $T_c$ and the depth of the fluid layer is $d$. (a) For the rectangular domain, $\varGamma = L_x/d$, where $L_x$ is the length of the domain and $\varGamma =30$ in our study. The front is initiated at the left wall (green) and travels to the right. (b) For the cylindrical domain, $\varGamma = r_0/d$, where $r_0$ is the radius of the domain and $\varGamma = 40$ in our study. The front is initialized at the centre (green) and propagates radially outward. The domains are not drawn to scale.

Figure 1

Figure 2.Exothermic fronts without solutal coupling propagating through a quiescent fluid ($Ra_T = 1000$, $Ra_s = 0$, $\eta > 0$). Colour contours of $c(x,z,t)$, where red is pure products and blue is pure reactants. Arrows are fluid velocity vectors; (a) $\eta = 1$, (b) $\eta = 10$, (c) $\eta = 20$, (d) $\eta = 50$. All images are at time $t = 6$ where the fronts were initiated at $t=0$. A zoomed-in view is shown to illustrate the front features: (a–c) show $2 \leq x \leq 10$ and (d) shows $8 \leq x \leq 16$. The maximum values of fluid velocity magnitudes present in (a–d) are $0.13$, $1.08$, $2.09$ and $3.85$.

Figure 2

Figure 3.The spatio-temporal dynamics of an exothermic front without solutal coupling propagating through an initially motionless fluid ($Ra_T = 1000$, $Ra_s = 0$, $\eta = 50$). (a) Space–time plot of $c(x,z=1/2,t)$, where red is products and blue is reactants. (b) The front velocity (solid line) as a function of time using the bulk-burning rate approach, see (3.1). The dashed line is the velocity of the leading edge of the front computed using a front-tracking approach.

Figure 3

Figure 4.The variation of the fluid temperature for an exothermic front propagating though an initially motionless fluid, where (a) $\eta = 1$, (b) $\eta = 10$, (c) $\eta = 20$, (d) $\eta = 50$. Colour contours of $T(x,z,t)$, where red is hot fluid and blue is cold fluid. Arrows indicate fluid velocity vectors and the solid line is the isocontour at $c=1/2$ indicating the location of the front. The concentration fields for these fronts are shown in figure 2. All images are at $t = 6$. For (a–c) the maximum temperature is $T = 1$ and for (d) it is $T \gtrsim 1$ due to the strong exothermic reaction. Remaining parameters: $Ra_T =1000$, $Ra_s=0$.

Figure 4

Figure 5.The variation of the asymptotic fluid velocity $\bar {U}$, front velocity $\bar {v}_f$ and mixing length $\bar {L}_s$ with $\eta$ for an exothermic front in a quiescent fluid $(Ra_T = 1000,\ Ra_s = 0, \eta > 0)$. Small, intermediate and large values of $\eta$ are represented using circles (blue), diamonds (green) and squares (red), respectively. (a) The variation of $\bar {U}$ with $\eta$. The solid line is $\bar {U} = 0.127 \eta$ and the dashed line is $\bar {U} = 0.465 \eta ^{1/2}$. (b) The variation of the front velocity with $\eta$, where $v_0=0.6$ is the analytical front velocity for $\eta =0$. The solid line is $( \bar {v}_f - v_0 )/v_0 = 0.151 \eta ^{3/2}$ and the dashed line is $(\bar {v}_f - v_0 )/v_0 = 0.503 \eta ^{1/2}$. (c) The variation of the mixing length with $\eta$, where $L_0=0.6$ is the analytical mixing length for $\eta =0$. The solid line is ${(\bar {L}_s - L_0)}/{L_0} = 0.49 \eta$ and the dashed line is ${(\bar {L}_s - L_0)}/{L_0} = 1.127 \eta ^{1/2}$.

Figure 5

Figure 6.Exothermic fronts with solutal feedback propagating through an initially motionless layer of fluid. Colour contours of $c(x,z,t)$, where blue is pure reactants and red is pure products. Arrows are fluid velocity vectors. (a) Cooperative feedback: $Ra_T = 1000$, $Ra_s = 300$, $\eta = 50$. (b) Antagonistic feedback: $Ra_T = 1000$, $Ra_s = -300$, $\eta = 50$. The images are at $t = 5.97$ and a close-up view is shown for $8 \leq x \leq 17$. The characteristic fluid velocities are (a) $U=3.84$ and (b) $U=3.67$.

Figure 6

Figure 7.Space–time plots of fronts with (a) cooperative feedback and (b) antagonistic feedback through an initially motionless fluid. Colour contours of $c(x,z=1/2,t)$, where red is pure products and blue is pure reactants. (a) Cooperative feedback: $Ra_T = 1000$, $Ra_s = 300$, $\eta = 50$. (b) Antagonistic feedback: $Ra_T = 1000$, $Ra_s = -300$, $\eta = 50$. Front images at $t=5.97$ (dashed line) are shown in figure 6.

Figure 7

Figure 8.The time variation of the front velocity $v_f$ for exothermic fronts with solutal feedback in a quiescent fluid. (a) The variation $v_f$ with time $t$ for cooperative feedback (upper curve, red) and antagonistic feedback (lower curve, blue). (b) The same data plotted as a phase portrait for cooperative feedback (right, red) and antagonistic feedback (left, blue). The direction in which the phase portrait is traversed is indicated by the arrows. Cooperative feedback: $Ra_T = 1000$, $Ra_s = 300$, $\eta = 50$. Antagonistic feedback: $Ra_T = 1000$, $Ra_s = -300$, $\eta = 50$.

Figure 8

Figure 9.Counter-rotating convection rolls generated by Rayleigh–Bénard convection. This flow field is used to study fronts propagating though a cellular flow field. Colour contours are of the streamfunction, where red indicates counter-clockwise rotation and blue indicates clockwise rotation. The characteristic fluid velocity is $U = 11.29$. Simulation parameters: $\varGamma = 30$, $Ra_T=3000$.

Figure 9

Figure 10.Exothermic fronts propagating through a cellular flow field generated by Rayleigh–Bénard convection. Colour contours of $c(x,z,t)$, where red is pure products and blue is pure reactants. Arrows are fluid velocity vectors. A close-up view is shown for $10 \leq x \leq 20$ to emphasize the front. (a–c) Cooperative feedback: $Ra_T=3000$, $Ra_s= 300$, $\eta =50$. (d–f ) Antagonistic feedback: $Ra_T=3000$, $Ra_s= -300$, $\eta =50$. Panels (a–c) and (d–f ) are separated by approximately 0.5 time units to illustrate the dynamics.

Figure 10

Figure 11.Space–time plots of fronts propagating through a cellular flow field. Colour contours are of $c(x,z=1/2,t)$, where red is products and blue is reactants. The locations of the centres of the Rayleigh–Bénard convection rolls are indicated by a solid (dashed) line for rolls with clockwise (counter-clockwise) rotation. (a) Cooperative feedback: $\eta = 50$, $Ra_s = 300$, and $Ra_T = 3000$. Fronts are shown in figure 10(a–c). (b) Antagonistic feedback: $\eta = 50$, $Ra_s = -300$, and $Ra_T = 3000$. Fronts are shown in figure 10(d–f ).

Figure 11

Figure 12.(a) The variation of the front velocity with time for fronts propagating through a cellular flow field with cooperative feedback (red, upper) or antagonistic feedback (blue, lower). (b) The phase portrait for cooperative feedback for $2 \le t \le 6$. (c) The phase portrait for antagonistic feedback for $2 \le t \le 8$. Arrows indicate the direction of the trajectory. Cooperative feedback: $Ra_s = 300$, $Ra_T = 3000$, $\eta = 50$. Antagonistic feedback: $Ra_s = -300$, $Ra_T = 3000$, $\eta = 50$.

Figure 12

Figure 13.A comparison of the time-averaged values of the (a) characteristic fluid velocity, (b) front velocity and (c) reaction zone length of an exothermic front with $\eta =50$ travelling through a two-dimensional layer of fluid that is initially motionless ($Ra_T = 1000$) or contains a cellular flow field ($Ra_T = 3000$). Squares (red) are for cooperative coupling with $Ra_s = 300$, circles (blue) are for antagonistic coupling with $Ra_s = -300$. The error bars represent the magnitude of the standard deviation of the time variation about the mean value.

Figure 13

Figure 14.The propagation of a front through a three-dimensional chaotic flow field. The front is initiated at the centre at $t=0$. Colour contours are shown of $c(x,y,z=1/2,t)$ at $t = 3.4$, where red is products and blue is reactants. Black lines are contours of $T = 1/2$, indicating the location of the centre of the convection rolls. (a) Without solutal coupling and without heat release: $Ra_s=\eta =0$. (b) Solutal coupling and without heat release: $Ra_s = 6000$, $\eta =0$. (c) Without solutal coupling and with heat release: $Ra_s = 0$, $\eta = 18$. (d) Cooperative feedback: $Ra_s = 6000$, $\eta = 18$. (e) Antagonistic feedback: $Ra_s = -6000$, $\eta = 18$. In all panels: $Ra_T = 6000$, $Le = 0.1$.

Figure 14

Figure 15.The fluid temperature of a chaotic flow field containing a propagating front. Red is hot rising fluid ($T = 1$) and blue is cold descending fluid ($T = 0$). (a) A front without solutal coupling and without heat release ($Ra_s = \eta = 0$). In this case, the temperature field is unaltered by the front and the state of spiral defect chaos is clearly evident. (b) A front with solutal coupling and without heat release ($Ra_s = 6000$, $\eta =0$). (c) A front without solutal coupling and with heat release ($Ra_s = 6000$, $\eta = 18$). (d) A front with cooperative feedback ($Ra_s = 6000$, $\eta = 18$). (e) A front with antagonistic feedback ($Ra_s = 6000$, $\eta = 18$). In all panels $Ra_T = 6000$ and $Le = 0.1$.

Figure 15

Figure 16.The spatial variation of the local wavenumber $q$ of the fluid patterns. Colour contours are of $q$, where blue is small and red is large over the range $1 \leq q \leq 4$. (a) The spiral defect chaos flow field ($Ra_s = \eta = 0$). (b) A front with solutal coupling and without heat release ($Ra_s = 6000$, $\eta =0$). (c) A front without solutal coupling and with heat release ($Ra_s = 0$, $\eta = 18$). (d) A front with cooperative feedback ($Ra_s = 6000$, $\eta = 18$). (e) A front with antagonistic feedback ($Ra_s =- 6000$, $\eta = 18$). In all panels, $Ra_T = 6000$ and $Le = 0.1$.

Mukherjee and Paul supplementary movie 1

See word file for movie caption

Download Mukherjee and Paul supplementary movie 1(Video)
Video 2 MB

Mukherjee and Paul supplementary movie 2

See word file for movie caption
Download Mukherjee and Paul supplementary movie 2(Video)
Video 1.9 MB

Mukherjee and Paul supplementary movie 3

See word file for movie caption

Download Mukherjee and Paul supplementary movie 3(Video)
Video 3.9 MB
Supplementary material: File

Mukherjee and Paul supplementary material

Captions for movies 1-3

Download Mukherjee and Paul supplementary material(File)
File 2.7 KB