Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T16:16:31.326Z Has data issue: false hasContentIssue false

Dynamics of cellular flame deformation after a head-on interaction with a shock wave: reactive Richtmyer–Meshkov instability

Published online by Cambridge University Press:  02 August 2021

Hongxia Yang*
Affiliation:
Fire & Explosion Protection Laboratory, Northeastern University, Shenyang 110819, PR ChinaDepartment of Mechanical Engineering, University of Ottawa, 161 Louis-Pasteur, Ottawa K1N 6N5, Canada
Matei Ioan Radulescu
Affiliation:
Department of Mechanical Engineering, University of Ottawa, 161 Louis-Pasteur, Ottawa K1N 6N5, Canada
*
†Email address for correspondence: yang.hongxia@foxmail.com

Abstract

Shock-flame interactions are fundamental problems in many combustion applications ranging from flame acceleration to flame control in supersonic propulsion applications. The present paper seeks to quantify the rate of deformation of the flame surface and burning velocity caused by the interaction and to clarify the underlying mechanisms. The interaction of a single shock wave with a cellular flame in a Hele-Shaw shock tube configuration was studied experimentally, numerically and theoretically. A mixture of stoichiometric hydrogen-air at sub-atmospheric pressure was chosen such that large cells can be isolated and their deformation studied with precision subsequent to the interaction. Following passage of the incident shock and vorticity deposition along the flame surface, the flame cusps are flattened and reversed backwards into the burned gas. The reversed flame then goes through four stages. At times significantly less than the characteristic flame burning time, the flame front deforms as an inert interface due to the Richtmyer–Meshkov instability with nonlinear effects becoming noticeable. At times comparable to the laminar flame time, dilatation due to chemical energy release amplifies the growth rate of the Richtmyer–Meshkov instability. This stage is abruptly terminated by the transverse burnout of the resulting flame funnels, followed by a longer front re-adjustment to a new cellular flame evolving on the cellular time scale of the flame. The proposed flame evolution model permits us to predict the evolution of the flame geometry and burning rate for arbitrary shock strength below the shock-induced auto-ignition point and flames with unit Lewis number in two dimensions.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Schematic of the experimental set-up in the shock tube, $l_{1}=203$ mm, $l_{2}=102$ mm, $l_{3} = 406$ mm.

Figure 1

Figure 2.Superposition of flame fronts development at different times for stoichiometric hydrogen-air ignited by a hot tungsten wire. Pressure of 20.7 kPa. Recorded at 59 590 fps. The time interval between the flame front is 0.25 ms.

Figure 2

Figure 3.(a) Schlieren image sequence, (b) space–time diagram obtained every tenth pixel for stoichiometric hydrogen-air cellular flame development. Pressure of 17.2 kPa. Recorded at 59 590 fps.

Figure 3

Figure 4.Schlieren image sequence of the interaction of a $M_{s} = 1.9$ incident shock wave (ISW) with stoichiometric hydrogen-air flame (F). Here TSW is the transmitted shock wave, MF is the middle flange of the shock tube. Time 0 corresponds to the beginning of the interaction.

Figure 4

Figure 5.Sketch of the three-dimensional flame configuration (a) before and (b) after the interaction with the shock.

Figure 5

Figure 6.Sketch of the flame cells configuration. The amplitude and wavelength for cell a, b, c, d, e and f are measured separately.

Figure 6

Figure 7.Time evolution of (a) normalized cell amplitudes and (b) average flame propagation speeds following the interaction of a $M_{s}=1.9$ incident shock wave with the stoichiometric hydrogen-air flame.

Figure 7

Figure 8.Schlieren image sequence of the interaction of a $M_s = 1.75$ incident shock wave (ISW) with stoichiometric hydrogen-air flame (F). Here TSW is the transmitted shock wave, MF is the middle flange of the shock tube. Time 0 corresponds to the beginning of the interaction. Flame initial pressure of 17.2 kPa. Recorded at 59 590 fps.

Figure 8

Figure 9.Time evolution of (a) normalized cell amplitudes and (b) average flame propagation speeds following the interaction of a $M_{s}=1.75$ incident shock wave with stoichiometric hydrogen-air flame.

Figure 9

Figure 10.Schlieren image sequence of the interaction of a $M_{s} = 1.53$ incident shock wave (ISW) with stoichiometric hydrogen-air flame (F). Here TSW is the transmitted shock wave, MF is the middle flange of the shock tube. Time 0 corresponds to the beginning of the interaction. Flame initial pressure of 17.2 kPa. Recorded at 59 590 fps.

Figure 10

Figure 11.Time evolution of (a) amplitudes of cell $d$ and (b) propagation speeds subsequent to the interaction for different incident shock strengths of $M_{s} = 1.9$, 1.75 and 1.53, $\eta _{0}$ corresponds to the respective initial amplitude before the interaction.

Figure 11

Table 1.Thermo-chemical properties and model parameters for the stoichiometric hydrogen-air combustion at $T=294$ K and $p_0 = 17.24$ kPa.

Figure 12

Figure 12.Steady 1-D flame profile of temperature, pressure, density and reaction progress variable.

Figure 13

Figure 13.Time evolution of (a) maximum heat release contour at times $t/t_{fs} = 0$, 10, 20, 30, 35, 40, 45 and 49.9 illustrating the initial set-up and the cellular flame development, (b) flame shape amplitude and burning velocity.

Figure 14

Figure 14.Comparison of the flame shape from the top-half middle cell marked in figure 4(2) before the interaction (top) and the simulation (bottom), the red dashed line and the black line denote the profile of the simulation, the blue dashed line shows the difference.

Figure 15

Figure 15.Density profiles illustrating the (a) flame and (b) inert interface evolution subsequent to the interaction with the $M_{s}=1.9$ shock.

Figure 16

Figure 16.Comparison of the gradient of density from the simulation (bottom) with the Schlieren photos from the experiment (top) illustrating the time evolution of the flame following the interaction with the $M_{s}=1.9$ shock from the simulation and the experiment.

Figure 17

Figure 17.(a) Comparison of the interface amplitude as a function of time for the experiment, the simulation of the reactive and non-reactive interaction, and the prediction of Mikaelian's model, combined model of the inert simulation and the flame model, and the proposed model. (b) Zoomed-in view of interface amplitude for the experiment, the simulation of the reactive and non-reactive interaction, and the prediction of the Mikaelian model and the MB model within the time range of 0 to 0.2 $t_f$ subsequent to the interaction with the Mach 1.9 incident shock.

Figure 18

Figure 18.Time evolution of the flame burning velocity after the interaction of a Mach 1.9 incident shock.

Figure 19

Figure 19.Time evolution of the superimposed flame contour of $Y = 0.2$ for the interaction with different incident shock strengths illustrated with the same size as figure 15. The red, green, blue and black lines refer to the cases of shock Mach numbers 1.53, 1.75, 1.9 and 2.5.

Figure 20

Figure 20.Comparison of the time evolution of amplitudes of the flame subsequent to the interaction with the different incident shock Mach numbers 1.53, 1.75, 1.9 and 2.5.

Figure 21

Figure 21.Zoomed-in view of (a) the time evolution of the flame amplitudes from 0 to 0.7$t_f$ and (b) their growth rate in the amplification stages for the interaction with the different incident shock Mach numbers 1.53, 1.75, 1.9 and 2.5.

Figure 22

Figure 22.Comparison of the time evolution of amplitudes growth of the flame in the new cellular flame formation stage for the cases of different incident shock Mach numbers 1.53, 1.75, 1.9 and 2.5.

Figure 23

Figure 23.Evolution of the flame burning velocity following the interaction with the different incident shock Mach numbers 1.53, 1.75, 1.9 and 2.5.

Figure 24

Figure 24.Simplified geometrical model of flame front expansion.

Figure 25

Figure 25.Comparison of the time evolution of amplitude and growth rate of the simulation with the proposed model for the interaction of the flame with different incident shock Mach numbers 1.53, 1.75, 1.9 and 2.5.

Figure 26

Figure 26.Temperature profile illustrating the flame and contact surface evolution subsequent to the interaction with the $M_{s} = 1.9$ shock. The white curve denotes the position of the contact surface on which the initial vorticity was deposited.

Figure 27

Figure 27.Sketch of the time evolution of the flame and contact surface subsequent to the passage of the incident shock illustrating the increased distance between them.

Figure 28

Figure 28.Comparison of the time evolution of the characteristic rate of the burning velocity and the amplitude in the new cellular flame formation stage for the interaction of the flame with different incident shock Mach numbers; (a) $M_s=1.53$, (b) $M_s=1.75$, (c) $M_s=1.9$ and (d) $M_s=2.5$.

Figure 29

Figure 29.The density profile of the middle cell in the sixth frame of figure 4 illustrating the error from the measurement.

Figure 30

Figure 30.The space–time diagram evolution of interaction of figure 4 reconstructed from the one-dimensional gas dynamic model.

Figure 31

Figure 31.Comparison of the (a) density profile and (b) time evolution of burning velocity for the different resolutions considered.

Yang and Radulescu supplementary movie 1

The experimental result of the Interaction of a Ms = 1.9 incident shock wave with stoichiometric hydrogen-air flame

Download Yang and Radulescu supplementary movie 1(Video)
Video 2 MB

Yang and Radulescu supplementary movie 2

The experimental result of the Interaction of a Ms = 1.75 incident shock wave with stoichiometric hydrogen-air flame

Download Yang and Radulescu supplementary movie 2(Video)
Video 2.3 MB

Yang and Radulescu supplementary movie 3

The experimental result of the Interaction of a Ms = 1.53 incident shock wave with stoichiometric hydrogen-air flame

Download Yang and Radulescu supplementary movie 3(Video)
Video 2.3 MB

Yang and Radulescu supplementary movie 4

The initial numerical setup and cellular flame development

Download Yang and Radulescu supplementary movie 4(Video)
Video 116.5 KB

Yang and Radulescu supplementary movie 5

Density profiles illustrating the numerical result of flame evolution subsequent to the interaction with the Ms=1.9 shock

Download Yang and Radulescu supplementary movie 5(Video)
Video 388.2 KB

Yang and Radulescu supplementary movie 6

Density profiles illustrating the numerical result of inert interface evolution subsequent to the interaction with the Ms=1.9 shock

Download Yang and Radulescu supplementary movie 6(Video)
Video 215.7 KB

Yang and Radulescu supplementary movie 7

Density profiles illustrating the numerical result of flame evolution subsequent to the interaction with the Ms=2.5 shock

Download Yang and Radulescu supplementary movie 7(Video)
Video 382.9 KB

Yang and Radulescu supplementary movie 8

Density profiles illustrating the numerical result of flame evolution subsequent to the interaction with the Ms=1.75 shock

Download Yang and Radulescu supplementary movie 8(Video)
Video 408.9 KB

Yang and Radulescu supplementary movie 9

Density profiles illustrating the numerical result of flame evolution subsequent to the interaction with the Ms=1.53 shock

Download Yang and Radulescu supplementary movie 9(Video)
Video 463.3 KB

Yang and Radulescu supplementary movie 10

Density profiles illustrating the flame evolution subsequent to the interaction with the Ms=1.9 shock with the numerical refinement level of 6

Download Yang and Radulescu supplementary movie 10(Video)
Video 241.9 KB