Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T21:19:32.352Z Has data issue: false hasContentIssue false

Surfing of drops on moving liquid–liquid interfaces

Published online by Cambridge University Press:  08 April 2020

Teng Dong
Affiliation:
ThAMeS Multiphase, Department of Chemical Engineering, University College London, LondonWC1E 7JE, UK
Fei Wang
Affiliation:
ThAMeS Multiphase, Department of Chemical Engineering, University College London, LondonWC1E 7JE, UKBeijing Institute of Space Long March Vehicle, No. 1 Nandahongmen Road, Fengtai District,Beijing100076, PR China
Weheliye H. Weheliye
Affiliation:
ThAMeS Multiphase, Department of Chemical Engineering, University College London, LondonWC1E 7JE, UK
Panagiota Angeli*
Affiliation:
ThAMeS Multiphase, Department of Chemical Engineering, University College London, LondonWC1E 7JE, UK
*
†Email address for correspondence: p.angeli@ucl.ac.uk

Abstract

The delayed coalescence of drops with the interface between a moving aqueous layer and an oil phase is investigated in a novel flow channel. Drops are released onto oil–aqueous interfaces moving at velocities from $0~\text{cm}~\text{s}^{-1}$ up to $3.4~\text{cm}~\text{s}^{-1}$. The evolution of the drop shape, the film thickness between the drop and the bulk liquid, and the velocities of the drop surface and the bulk interface were measured with planar laser-induced fluorescence. As the interface speed increases, the drop coalescence is delayed. This is attributed to the lubrication pressure that develops in the draining film. This pressure was calculated by using the drop shape and the tangential velocities of the drop surface and the bulk interface, and was shown to increase with the interface velocity. The film forming between the drop and the bulk liquid has a dimple shape, symmetric about the centreline. With increasing interface velocity, the dimple shifts to the front part of the drop, resulting locally in a low pressure, which leads to film rupture. As the film breaks, ‘oil drops on a string’ formations are entrained into the water phase, which is rarely seen when a drop coalesces with a stationary liquid–liquid interface. The velocity fields in the drop were investigated with particle image velocimetry. It is found immediately after reaching the interface that the drops accelerate to reach the interface speed. Initially there is a strong internal circulation in the drops, which decays quickly as the drops approach the speed of the interface.

Information

Type
JFM Papers
Copyright
© The Author(s), 2020. Published by Cambridge University Press
Figure 0

Figure 1.(a) Schematic of the experimental set-up. (b) Design details of the main flow channel along with the inlet chamber and the outlet chamber. (c) Image of the PLIF tests showing the nozzle position for delivering the drops. (d) Typical PIV raw image showing a drop surfing on the interface.

Figure 1

Figure 2.Probability distribution of drop rest time at the liquid–liquid interfaces with different speeds.

Figure 2

Figure 3.Schematic of the mass conservation in the control volume (hatched area) in the thinning film.

Figure 3

Figure 4.(a) Variation of the drop deformation characterized by the diameter ratio $D_{h}/D_{v}$ and the descent depth of the drop bottom from its initial position at $t=0~\text{ms}$ when the drop contacts the interface; the data are averaged from five tests with standard deviation less than 6.8 %. (b) The impact and rebound of a single drop at the fluid interface of $v=3.4~\text{cm}~\text{s}^{-1}$.

Figure 4

Figure 5.Change of drop velocity with time (a) over the whole measuring period, and (b) during the initial impact and rebound period. The velocity values in the legend are determined by tracking the motion of the drops at the final stage when the velocity is the same as that of the bulk interface. The fitting curves of the data are plotted in solid lines to help visualization.

Figure 5

Figure 6.(a) Raw PLIF image showing the film shape. (b) Variation of the light intensity $I$ (left axis) and intensity gradient $\unicode[STIX]{x0394}I/\unicode[STIX]{x0394}z$ (right axis) along the vertical dashed (yellow) line in panel (a).

Figure 6

Figure 7.The variation of the film thickness during drop impact and rebound at bulk interface velocities (a,b) $v=1.0~\text{cm}~\text{s}^{-1}$, (c,d) $v=2.1~\text{cm}~\text{s}^{-1}$, and (e,f) $v=3.4~\text{cm}~\text{s}^{-1}$. The vertical dotted (red) lines represent the locations with the maximum film thicknesses at the last time step of the measurement.

Figure 7

Figure 8.(a) Variation of the horizontal locations of the minimum film thickness against time $t$. The initial values were taken at 5 ms after the drop contacts the bulk interface. (b) Evolution of the film width; only the cases $v=1.0~\text{cm}~\text{s}^{-1}$ and $v=3.4~\text{cm}~\text{s}^{-1}$ are shown to help visualization.

Figure 8

Figure 9.Velocity fields ($\text{m}~\text{s}^{-1}$) in the drop at different locations away from the impact point for $v=2.1~\text{cm}~\text{s}^{-1}$. The velocity is the value relative to the translational velocity of the drop, which is measured by detecting the trajectory of the centre point of the drop. The solid lines outline the drop surface.

Figure 9

Figure 10.(a) A pendent drop resting on the interface without coalescence. The origin of the axes is at the centre of the maximum width of the deformed drop, which is defined as $2R$. (b) Thickness of the film trapped between the drop surface and the liquid–liquid interface. The film thickness is averaged from five different times when a drop levitates on the interface, and the error bars show the standard deviation. (c) The magnitude of the velocity along both the drop surface and the interface of the bulk liquid. The spatial location is normalized by the drop ‘radius’ $R$.

Figure 10

Figure 11.(a) The lubrication pressure along the film. (b) Velocity profiles at different locations in the trapped film for the case of a pendent drop on the moving interface as shown in figure 10(a).

Figure 11

Figure 12.Comparison of the film pressure calculated by the local curvature of the pendent drop surface with the numerically simulated pressure. The data shown are averaged from the pressures at five different time steps. The error bars show the standard deviation.

Figure 12

Figure 13.(a) Relative lubrication pressure $\unicode[STIX]{x0394}P_{l}$ at any point $p_{i}$ in the film for the case of a moving drop on the interface with velocity $v=3.4~\text{cm}~\text{s}^{-1}$ after the rebound. The pressure at point $p_{0}$ at the film exit is taken as reference. (b) Magnitude of $\unicode[STIX]{x0394}P_{l}$ in the film between the travelling drop and the bulk interface at different velocities and at $t$= 130 ms. The pressure value is averaged over five different tests and the error bars show the standard deviation.

Figure 13

Figure 14.Distribution of rupture points for an interface with different speeds. The data acquired from different coalescence events are marked by different colours.

Figure 14

Figure 15.Film thickness at two different locations $L$ from the drop impact point for interfaces of different speeds.

Figure 15

Figure 16.Formation of the ‘drops on a string’ during the coalescence of drops with moving interfaces with speeds of (a) $v=2.1~\text{cm}~\text{s}^{-1}$, $L=0.5~\text{cm}$ and (b) $v=3.4~\text{cm}~\text{s}^{-1}$, $L=1$  cm. (c) Incomplete drop-string formation for a coalescence event at $v=3.4~\text{cm}~\text{s}^{-1}$, $L=5~\text{cm}$.

Figure 16

Figure 17.Geometric variables of drop on a deformed interface.

Figure 17

Figure 18.Variation of the total force $F_{total}$ that the drops require for the acceleration, the estimated drag force $F_{drag}$ from the surrounding liquids and the tangential force $F_{film}$ from the film at the bottom of the drop.

Figure 18

Figure 19.Computational domain and details of the grid used around the drop and in the film region (total number of cells 1 28 053).

Figure 19

Figure 20.Contour of the pressure field in the trapped film and in the surrounding area.

Dong et al. supplementary movie 1

The traveling drop along with the interface at v =3.4 cm/s from the impact position

Download Dong et al. supplementary movie 1(Video)
Video 15.6 MB

Dong et al. supplementary movie 2

Non-coalescence of pendent drop at the moving interface of v = 2.1 cm/s.

Download Dong et al. supplementary movie 2(Video)
Video 5.9 MB

Dong et al. supplementary movie 3

The coalescence where the rupture point locates in the front bottom of the drop.

Download Dong et al. supplementary movie 3(Video)
Video 18.1 MB

Dong et al. supplementary movie 4

Formation of the drops-on-string during the film breakage at the interface of v = 3.4 cm/s.

Download Dong et al. supplementary movie 4(Video)
Video 6.9 MB