Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T22:27:06.245Z Has data issue: false hasContentIssue false

Turbidity currents propagating down an inclined slope: particle auto-suspension

Published online by Cambridge University Press:  09 January 2023

Jiafeng Xie
Affiliation:
Ocean College, Zhejiang University, Zhoushan 316021, PR China
Peng Hu*
Affiliation:
Ocean College, Zhejiang University, Zhoushan 316021, PR ChinaOcean Research Center of Zhoushan, Zhejiang University, Zhoushan 316021, PR China
Chenlin Zhu*
Affiliation:
Key Laboratory of Intelligent Manufacturing Quality Big Data Tracing and Analysis of Zhejiang Province, China Jiliang University, Hangzhou 310018, PR China
Zhaosheng Yu
Affiliation:
State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanics, Zhejiang University, Hangzhou 310027, PR China
Thomas Pähtz
Affiliation:
Ocean College, Zhejiang University, Zhoushan 316021, PR ChinaDonghai Lab, Zhoushan 316021, PR China
*
†Email addresses for correspondence: pengphu@zju.edu.cn, zhuclgary@foxmail.com
†Email addresses for correspondence: pengphu@zju.edu.cn, zhuclgary@foxmail.com

Abstract

The turbidity current (TC), a ubiquitous fluid–particle coupled phenomenon in the natural environment and engineering, can transport over long distances on an inclined terrain due to the suspension mechanism. A large-eddy simulation and discrete element method coupled model is employed to simulate the particle-laden gravity currents over the inclined slope in order to investigate the auto-suspension mechanism from a Lagrangian perspective. The particle Reynolds number in our TC simulation is $0.01\sim 0.1$ and the slope angle is $1/20 \sim 1/5$. The influences of initial particle concentration and terrain slope on the particle flow regimes, particle movement patterns, fluid–particle interactions, energy budget and auto-suspension index are explored. The results indicate that the auto-suspension particles predominantly appear near the current head and their number increases and then decreases during the current evolution, which is positively correlated with the coherent structures around the head. When the turbidity current propagates downstream, the average particle Reynolds number of the auto-suspension particles remains basically unchanged, and is higher than that of other transported particles. The average particle Reynolds number of the transported particles exhibits a negative correlation with the Reynolds number of the current. Furthermore, the increase in particle concentration will enhance the particle velocity, which allows the turbidity current to advance faster and improves the perpendicular support, thereby increasing the turbidity current auto-suspension capacity. Increasing slope angle will result in a slightly larger front velocity, while the effect of that on the total force is insignificant.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press
Figure 0

Figure 1.Schematic view of the initial configuration of the lock-exchange TC.

Figure 1

Table 1.Parameters of numerical simulations for each case.

Figure 2

Figure 2.Fluid velocity profiles at the four selected positions ($x$ = 3.6, 4.0, 4.6 and 4.8) at $t=6$ for case 1 (a) with four different coupling intervals ($N_t=$ 20, 50, 100 and 200), (b) with three different computational grid resolutions ($300(N_x)\times 30(N_y)\times 90(N_z)$, $250\times 25\times 80$ and $200\times 20\times 60$) and (c) with three different Smagorinsky constants ($C_s=$ 0.05, 0.10 and 0.15).

Figure 3

Figure 3.Temporal evolution of simulated TC fronts under different cases, and the comparison of simulated fronts with the measured data (Gladstone et al.1998).

Figure 4

Table 2.Comparison of fitting results for present six cases.

Figure 5

Figure 4.Spatial variations of (a,c) local average particle bed-parallel velocity and (b,d) local average particle bed-normal velocity at two selected times. Black line indicates the TC profile.

Figure 6

Figure 5.(a,c) Particle bed-parallel velocity profiles and (b,d) particle bed-normal velocity profiles at 0.05 current lengths upstream from the front at $t=6$ under different cases. Here, $z'=z-z_b$ with $z_b$ denoting the bed elevation; ${\textit {Re}}_f$ (case 1) = 27, ${\textit {Re}}_f$ (case 2) = 35, ${\textit {Re}}_f$ (case 3) = 46, ${\textit {Re}}_f$ (case 4) = 37, ${\textit {Re}}_f$ (case 5) = 24, and ${\textit {Re}}_f$ (case 6) = 23.

Figure 7

Figure 6.Coherent vortex structures captured by $Q=0.125$ of case 1 at five selected moments: (a) $t=2$, (b) $t=4$, (c) $t=6$, (d) $t=8$ and (e) $t=10$. The dispersed particles are also drawn here and rendered with the bed-normal particle velocity.

Figure 8

Figure 7.Top-view visualization of the coherent vortex structures below the slice $z'=0.5$ illustrated by the $Q$-criterion with an isovalue $Q=0.25$; (a) $t=2$, (b) $t=4$, (c) $t=6$, (d) $t=8$, (e) $t=10$ and ( f) $t=12$.

Figure 9

Figure 8.Trajectory of 160 particles (a) in the tank reference system and (b) in the reference frame moving with the TC head. The trajectories of the six representative particles which have entered auto-suspension state are distinguished by coloured lines.

Figure 10

Figure 9.Time evolution of the auto-suspension particle quantity. Here, $N_p$ represents the number of all particles, and $N_{p,Auto}$ denotes the number of auto-suspension particles.

Figure 11

Figure 10.Time evolution of the average particle Reynolds number $\overline {{\textit {Re}}_p}$ for different cases. The abbreviation ‘AS’ represents ‘auto-suspension’.

Figure 12

Figure 11.Spatial distribution of auto-suspension particles at six selected times. Green dot indicates the negative $\boldsymbol {F}^T_\bot$ particle, while red dot indicates the positive $\boldsymbol {F}^T_\bot$ particle; (a) $t = 2.0$, (b) $t = 3.2$, (c) $t = 4.0$, (d) $t = 6.0$, (e) $t = 8.0$, ( f) $t = 10.0$.

Figure 13

Figure 12.Four dimensionless bed-normal force components ($\boldsymbol {F}^{Ed}_\bot$, $\boldsymbol {F}^l_\bot$, $\boldsymbol {F}^{add}_\bot$ and $\boldsymbol {F}^c_\bot$) of auto-suspension particles at $t=4.0$. (a,c,e,g) The negative $\boldsymbol {F}^T_\bot$ particles and (b,d, f,h) the positive $\boldsymbol {F}^T_\bot$ particles.

Figure 14

Figure 13.Temporal evolution of (a) average bed-parallel forces and (b) average bed-normal forces on transported head particles.

Figure 15

Figure 14.Temporal variation of bed-parallel dimensionless components of (a,e) average total force, (b, f) average effective drag force, (c,g) average lift force and (d,h) average contact force under different cases.

Figure 16

Figure 15.Temporal variation of bed-normal dimensionless components of (a, f) average total force, (b,g) average effective drag force, (c,h) average lift force, (d,i) average added mass force and (e,j) average contact force under different cases.

Figure 17

Figure 16.Temporal evolution of non-dimensionalized energy components: (a,d) $\Delta E_p^{p,\ast }$, (b,e) $\Delta E_p^{f,\ast }$, and (c, f) $\Delta E_k^{f,\ast }$, $\Delta E_k^{p,\ast }$.

Figure 18

Figure 17.Temporal evolutions of head auto-suspension index for (a) different initial particle concentrations (cases 1, 2 and 3) and for (b) different slope angles (cases 4, 1, 5 and 6).

Figure 19

Figure 18.Temporal evolutions of head auto-suspension index for various cases with three head length definition methods. The dotted lines with circles represent 0.10 times the total length of the current, the solid lines 0.15 times the total length and the dotted lines with crosses 0.20 times the total length: (a) $C_0 = 0.01, \tan \theta = 1/10$; (b) $C_0 = 0.01, \tan \theta = 1/5$; (c) $C_0 = 0.015, \tan \theta = 1/10$; (d) $C_0 = 0.01, \tan \theta = 1/15$; (e) $C_0 = 0.02, \tan \theta = 1/10$; ( f) $C_0 = 0.01, \tan \theta = 1/20$.

Figure 20

Figure 19.Temporal and spatial variations of local auto-suspension index for various cases. Black dotted line indicates the front position of the TC. (a) Case 1 $C_0 = 0.01, \tan \theta = 1/10$. (b) Case 2 $C_0 = 0.015, \tan \theta = 1/10$. (c) Case 3 $C_0 = 0.02, \tan \theta = 1/10$. (d) Case 4 $C_0 = 0.01, \tan \theta = 1/5$. (e) Case 5 $C_0 = 0.01, \tan \theta = 1/15$. ( f) Case 6 $C_0 = 0.01, \tan \theta = 1/20$.