Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T21:42:11.898Z Has data issue: false hasContentIssue false

The influence of an insoluble surfactant on capillary oscillations of a bubble in a liquid

Published online by Cambridge University Press:  06 November 2025

Tatyana Lyubimova*
Affiliation:
Institute of Continuous Media Mechanics UB RAS, 1, Koroleva Street, Perm 614013, Russia
Vladimir Konovalov
Affiliation:
Institute of Continuous Media Mechanics UB RAS, 1, Koroleva Street, Perm 614013, Russia
Evgeny Borzenko
Affiliation:
Tomsk State University, Tomsk, 36, Lenin Ave., Tomsk 634050 Russia
Alexander Nepomnyashchy
Affiliation:
Technion–Israel Institute of Technology, Haifa 32000, Israel
*
Corresponding author: Tatyana Lyubimova, lubimova@psu.ru

Abstract

This study is devoted to the analysis of capillary oscillations of a gas bubble in a liquid with an insoluble surfactant adsorbed on the surface. The influence of the Gibbs elasticity, the viscosities of the liquid and gas, as well as the shear and dilatational surface viscosities, on the damping of free oscillations is examined. Dependences of the frequency shift and the damping rate on the parameters of the problem are determined. In the limit of small viscosities and neglecting the surfactant surface diffusion, a simplified dispersion relation is obtained, which includes finite parameters of surface viscosities and Gibbs elasticity. From this relation, conditions are identified under which the damping of capillary oscillations can occur with a small frequency. Numerical solutions of the full dispersion relation demonstrate that a non-oscillatory regime is impossible for the considered configuration. An additional mode associated with Gibbs elasticity is discovered, characterized as a rule by low natural frequency and damping rate. Approximate relations for the complex natural frequency of bubble oscillations in a low-viscosity liquid in the presence of a surfactant are derived, including an estimate of the contribution of the gas inside the bubble to viscous dissipation. An original Lagrangian–Eulerian method is proposed and used to perform direct numerical simulations based on the full nonlinear Navier–Stokes equations and natural boundary conditions at the interface, accounting for shear and dilatational viscosities. The numerical data on the damping process confirm the results of the linear theory.

Information

Type
JFM Papers
Copyright
© The Author(s), 2025. Published by Cambridge University Press
Figure 0

Figure 1.Configuration and parameters of the problem.

Figure 1

Figure 2.Dependences of the frequency shift (a) and damping rate (b) on the dissipative parameters of the media, when $\delta _{1}=\delta _{2}$. The relative density of the light phase is $\tilde {\rho }_{2}=0.01$, the meridional number is $l=2$ and the Gibbs elasticity parameter is $k=0$. The surface viscosity parameters are $h_{s}=1$ and $h_{d}=0$. The surface diffusion parameter is $d_{s}=0$. The solid line presents the numerical calculation. The dashed line shows the summary result of the asymptotic formulae (3.32) and (3.36). The long-dash line presents the corresponding approximation relation in Lu & Apfel (1991).

Figure 2

Figure 3.The region of non-oscillatory solutions of (3.38) for the light bubble.

Figure 3

Figure 4.Dependences of the oscillation frequency (a) and damping rate (b) on the shear surface viscosity parameter. The dissipative parameter is $\delta _{1}=0.001$, the dilatation surface viscosity parameter is $h_{d}=2$, and the surface diffusion parameter is $d_{s}=0$. The dashed and long-dash lines show the results of the asymptotic formula (3.38). Solid lines `1’ and `2’ present two numerical solutions.

Figure 4

Figure 5.Dependences of the oscillation frequency (a) and damping rate (b) on the shear surface viscosity parameter. The dissipative parameter is $\delta _{1}=0.001$, the dilatation surface viscosity parameter is $h_{d}=0.1$ and the surface diffusion parameter is $d_{s}=0$. The dashed and long-dash lines show the results of the asymptotic formula (3.38). Solid lines `1’ and `2’ present two numerical solutions.

Figure 5

Figure 6.Dependences of the frequency shift (a) and damping rate (b) of the capillary mode on the Gibbs elasticity parameter. The dissipative parameter is $\delta _{1}=0.001$.

Figure 6

Figure 7.Dependences of the oscillation frequency (a) and damping rate (b) of the capillary mode on the Gibbs elasticity parameter. The surface diffusion parameter takes values $d_{s}=0$ (curve 1), $d_{s}=1$ (2), $d_{s}=10$ (3) and $d_{s}=100$ (4).

Figure 7

Figure 8.Dependences of the oscillation frequency (a) and damping rate (b) on the Gibbs elasticity parameter. The dissipative parameter is $\delta _{1}=1/300$. Solid lines `1’ and `2’ represent two different modes.

Figure 8

Figure 9.Dependences of the oscillation frequency (a) and damping rate (b) on the Gibbs elasticity parameter. The dissipative parameter is $\delta _{1}=1$. Solid lines `1’ and `2’ represent two different modes.

Figure 9

Figure 10.Dependences of the oscillation frequency (a) and damping rate (b) on the shear surface viscosity parameter $h_{s}$ for the `elastic’ mode. The Gibbs elasticity parameter is $k=-1$, and the dissipative parameter is $\delta _{1}=1/300$. The dilatational surface viscosity parameter takes values $h_{d}=0$ (curve 1), $h_{d}=0.1$ (2) and $h_{d}=1$ (3).

Figure 10

Figure 11.Dependences of the oscillation frequency (a) and damping rate (b) on the dilatational surface viscosity parameter $h_{d}$ for the `elastic’ mode. The Gibbs elasticity parameter is $k=-1$, and the dissipative parameter is $\delta _{1}=1/300$. The shear surface viscosity parameter takes values $h_{s}=0$ (curve 1), $h_{s}=0.1$ (2) and $h_{s}=1$ (3).

Figure 11

Figure 12.Dependences of the oscillation frequency (a) and damping rate (b) on the shear surface viscosity parameter $h_{s}$. The Gibbs elasticity parameter is $k=-1$, the dissipative parameter is $\delta _{1}=1/300$ and the dilatation surface viscosity parameter is $h_{d}=0$. Solid lines `1’ and `2’ represent two different modes.

Figure 12

Figure 13.Dependences of the oscillation frequency (a) and damping rate (b) on the dilatation surface viscosity parameter $h_{d}$. The Gibbs elasticity parameter is $k=-1$, the dissipative parameter is $\delta _{1}=1/300$ and the shear surface viscosity parameter is $h_{s}=0$. Solid lines `1’ and `2’ represent two different modes.

Figure 13

Figure 14.Dependences of the oscillation frequency (a) and damping rate (b) on the shear surface viscosity parameter $h_{s}$ for the least rapidly damping mode. The Gibbs elasticity parameter is $k=-0.05$, and the dissipative parameter is $\delta _{1}=0.001$. The dilatation surface viscosity parameter takes values $h_{d}=0$ (curve 1), $h_{d}=0.1$ (2) and $h_{d}=1$ (3).

Figure 14

Figure 15.Dependences of the oscillation frequency (a) and damping rate (b) on the dilatational surface viscosity parameter $h_{d}$ for the least rapidly damping mode. The Gibbs elasticity parameter is $k=-0.05$, and the dissipative parameter is $\delta _{1}=0.001$. The shear surface viscosity parameter takes values $h_{s}=0$ (curve 1), $h_{s}=0.1$ (2) and $h_{s}=1$ (3).

Figure 15

Figure 16.The computational domain.

Figure 16

Figure 17.Temporal dependences of the velocity of the south pole (a), the total amount of surfactant on the surface (b) and the distribution of surface concentration (c) at t = 0.5. Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$, $h_{s}=0.5$ and $h_{d}=0.5$. $\varDelta =0.005$ (1, 2, 3, 4 are $h=1/20$, $1/40$, $1/80$, $1/160)$.

Figure 17

Figure 18.Temporal dependences of the velocity of the south pole (a), the total amount of surfactant on the surface (b) and the distribution of surface concentration (c) at t = 0.5. Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$, $h_{s}=0$, and $h_{d}=0$. $\varDelta =0.005$ (1, 2, 3, 4 are $h=1/20$, $1/40$, $1/80$, $1/160)$.

Figure 18

Table 1.Values of time and velocity at the first two extremum points for different grid spacings.

Figure 19

Figure 19.Dependence of axial velocity and concentration $\varGamma$ of the north pole on time. Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$ and $\varDelta =0.005$. Here (a) $h_{s}=h_{d}=0$, (b) $0.2$ and (c) are $0.5$.

Figure 20

Figure 20.Distributions of tangential velocity (a), normal velocity (b) and concentration (c) along the free boundary. Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$ and $\varDelta =0.005$ (solid, dot–dash, dashed lines are for $h_{s}=h_{d}=0$, $0.2$, $0.5)$.

Figure 21

Figure 21.Distribution of radial (a), axial (b) velocity components, pressure (c) and streamlines (d) at $t=0.6$. $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$, $h_{s}=h_{d}=0$ and $\varDelta =0.005$.

Figure 22

Figure 22.Dependences of velocity (a), axial coordinate (b) of the north pole and amount of surfactant (c) on time for different initial surface shapes. Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$ and $h_{s}=h_{d}=0.2$ (1, 2, 3, 4, 5 are for $\varDelta =0.005$, $0.01$, $0.02$, $0.05$, $0.1$).

Figure 23

Figure 23.Dependence of natural frequency (a) and damping rate (b) on the Gibbs elasticity parameter in the absence of surface viscosity (points are for numerical results, solid and dashed lines are for linear theory). Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$ and $\varDelta =0.005$.

Figure 24

Figure 24.Dependence of natural frequency (a) and damping rate (b) on the shear surface viscosity parameter $h_{s}$ (points are for numerical results, lines are for linear theory). Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$, $h_{d}=0$ and $\varDelta =0.005$.

Figure 25

Figure 25.Dependence of natural frequency (a) and damping rate (b) on the dilatational surface viscosity parameter $h_{d}$ (points are for numerical results, lines are for linear theory). Here $\delta _{1}=1/300$, $d_{s}=1.176\times 10^{-6}$, $k=-1$ and $\varDelta =0.005$ (solid, dashed lines are for $h_{s}=0$, $1)$.