Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T22:21:13.601Z Has data issue: false hasContentIssue false

A physical conjecture for the dipolar–multipolar dynamo transition

Published online by Cambridge University Press:  15 July 2019

B. R. McDermott
Affiliation:
Department of Engineering, Cambridge University, CambridgeCB2 1PZ, UK
P. A. Davidson*
Affiliation:
Department of Engineering, Cambridge University, CambridgeCB2 1PZ, UK
*
†Email address for correspondence: pad3@eng.cam.ac.uk

Abstract

In numerical simulations of planetary dynamos there is an abrupt transition in the dynamics of both the velocity and magnetic fields at a‘local’ Rossby number of 0.1. For smaller Rossby numbers there are helical columnar structures aligned with the rotation axis, which efficiently maintain a dipolar field. However, when the thermal forcing is increased, these columns break down and the field becomes multi-polar. Similarly, in rotating turbulence experiments and simulations there is a sharp transition at a Rossby number of ${\sim}0.4$. Again, helical axial columnar structures are found for lower Rossby numbers, and there is strong evidence that these columns are created by inertial waves, at least on short time scales. We perform direct numerical simulations of the flow induced by a layer of buoyant anomalies subject to strong rotation, inspired by the equatorially biased heat flux in convective planetary dynamos. We assess the role of inertial waves in generating columnar structures. At high rotation rates (or weak forcing) we find columnar flow structures that segregate helicity either side of the buoyant layer, whose axial length scale increases linearly, as predicted by the theory of low-frequency inertial waves. As the rotation rate is weakened and the magnitude of the buoyant perturbations is increased, we identify a portion of the flow which is more strongly three-dimensional. We show that the flow in this region is turbulent, and has a Rossby number above a critical value $Ro^{crit}\sim 0.4$, consistent with previous findings in rotating turbulence. We suggest that the discrepancy between the transition value found here (and in rotating turbulence experiments), and that seen in the numerical dynamos ($Ro^{crit}\sim 0.1$), is a result of a different choice of the length scale used to define the local $Ro$. We show that when a proxy for the flow length scale perpendicular to the rotation axis is used in this definition, the numerical dynamo transition lies at $Ro^{crit}\sim 0.5$. Based on this we hypothesise that inertial waves, continually launched by buoyant anomalies, sustain the columnar structures in dynamo simulations, and that the transition documented in these simulations is due to the inability of inertial waves to propagate for $Ro>Ro^{crit}$.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.Data from Soderlund et al. (2012, 2014) as a function of local Rossby number. The symbol for each quantity is shown above the corresponding axis label. (a) Dipolarity and relative axial helicity. (b) Columnarity and relative axial helicity.

Figure 1

Figure 2.Isosurfaces of $u_{z}^{2}$ coloured by helicity at (a) $\unicode[STIX]{x1D6FA}t=2$ and (b) $\unicode[STIX]{x1D6FA}t=10$ from Davidson & Ranjan (2015). The axis of rotation points upwards and the axis labels are grid point numbers.

Figure 2

Figure 3.(a) Azimuthally ($\unicode[STIX]{x1D719}$) averaged $\unicode[STIX]{x2202}T/\unicode[STIX]{x2202}\unicode[STIX]{x1D719}$ (in spherical coordinates) from a moderately forced geodynamo simulation (Ranjan et al.2018), the heat flux is concentrated in the equatorial regions. (b) $\unicode[STIX]{x1D719}$-averaged helicity from the same simulation. (c) The buoyant cloud initial condition and the spatial extent of the box in our simulations.

Figure 3

Figure 4.Root mean square velocity in the mid-plane. Symbols are defined in table 1.

Figure 4

Table 1.Parameters for all runs. Subscripts $b$ and $w$ denote the buoyancy/turbulence region and the wave region respectively.

Figure 5

Figure 5.Isosurfaces of axial vorticity for runs R2, R4 and R6 at 5 % of the maximum value: dark purple is positive $\unicode[STIX]{x1D714}_{z}$, light yellow is negative $\unicode[STIX]{x1D714}_{z}$. The solid white horizontal lines indicate the extent of the wave packets $-z_{w}$ and $z_{w}$, and the dashed white lines bound the buoyancy/turbulence region $(-z_{b},z_{b})$.

Figure 6

Figure 6.Vorticity isosurfaces at 5 % of the maximum value, coloured by relative helicity for runs R1, R3 and R5. The white dashed lines show the extent of the buoyancy/turbulence region $-z_{b}$ to $z_{b}$, the solid white lines show the extent of the wave field $-z_{w}$ and $z_{w}$.

Figure 7

Figure 7.Buoyancy field in the mid-plane at $\unicode[STIX]{x1D6FA}t=10$ for runs R1, R3 and R6, darker colours are higher magnitude.

Figure 8

Figure 8.Perpendicular spectra (normalised by their integral) in the mid-plane for $1\leqslant \unicode[STIX]{x1D6FA}t\leqslant 10$ (see legend), for runs R3 and R5. The black dashed line is the perpendicular spectrum of the initial buoyancy field.

Figure 9

Figure 9.Dissipation in the mid-plane as a function of $\unicode[STIX]{x1D6FA}t$ and $t$ respectively for runs R2–6. Symbols are defined in table 1.

Figure 10

Figure 10.Value of $t/\unicode[STIX]{x1D70F}_{_{NL}}$ in the mid-plane as a function of $\unicode[STIX]{x1D6FA}t$ and $t$ respectively for runs R1–6. The red shaded band indicates the range of $t/\unicode[STIX]{x1D70F}_{_{NL}}$ where the peak of dissipation lies. Symbols are defined in table 1.

Figure 11

Figure 11.Perpendicular spectra (normalised by their integral) in the mid-plane at (a) $\unicode[STIX]{x1D6FA}t=2$, (b) $\unicode[STIX]{x1D6FA}t=4$, (c) the peak of dissipation – $\unicode[STIX]{x1D70F}_{peak}$ and (d) at the end of the simulation, $\unicode[STIX]{x1D6FA}t=20$, for runs R1–6. The black dashed line is the perpendicular spectrum of the initial buoyancy field.

Figure 12

Figure 12.Plane-averaged columnarity in the buoyancy/turbulence region and in the wave region. Four curves (a) are labelled with the corresponding $\overline{Ro}_{b}$ value, and the dashed line is the time-averaged columnarity from the non-rotating run $\dagger$ (see table 2). Symbols are defined in table 1.

Figure 13

Table 2.Time-averaged perpendicular length scale and columnarity in the buoyancy/turbulence region and in the wave region, and average relative helicity in the bottom half of the box. Run $\dagger$ is a double resolution non-rotating run with the same initial conditions as R2–6.

Figure 14

Figure 13.Plane-averaged r.m.s. velocity for $2\leqslant \unicode[STIX]{x1D6FA}t\leqslant 20$.

Figure 15

Figure 14.As in figure 13, but now the left ordinate is normalised by $\unicode[STIX]{x1D6FA}t$.

Figure 16

Figure 15.The perpendicular length scale for $2\leqslant \unicode[STIX]{x1D6FA}t\leqslant 20$.

Figure 17

Figure 16.Relative helicity at $\unicode[STIX]{x1D6FA}t=16$ in the plane $z=3\bar{\unicode[STIX]{x1D6FF}}$ for runs R1, R3 and R6.

Figure 18

Figure 17.Approximate probability density function (p.d.f.) of relative helicity $h_{r}$ at $z=3\bar{\unicode[STIX]{x1D6FF}}$ and $\unicode[STIX]{x1D6FA}t=16$.

Figure 19

Figure 18.Rossby number (colour scale) based on $\ell _{\bot }$ for $|z|<10\bar{\unicode[STIX]{x1D6FF}}$ and $1\leqslant \unicode[STIX]{x1D6FA}t\leqslant 20$, the green contours are labelled by their value of $Ro$. The dashed white vertical lines indicate the time corresponding to the peak of dissipation, and the roughly horizontal dashed white lines show the extent of the buoyancy/turbulence region, $-z_{b}$ and $z_{b}$.

Figure 20

Figure 19.(a–c) Comparison of the extent of the buoyancy/turbulence region $z_{b}/\bar{\unicode[STIX]{x1D6FF}}$ and the contour height for $Ro=0.3,\,0.4,\,0.5$ respectively (see green contours figure 18) for runs R2–6. The dashed lines show the linear best fit. (d) The correlation coefficient and slope for values of $0.2\leqslant Ro\leqslant 0.6$, the grey dot marks a slope of 1.

Figure 21

Figure 20.The vorticity length scale $\ell _{\unicode[STIX]{x1D714}}$ plotted against $\ell _{\bar{n}}$ for a dataset from Dormy et al. (2018). The shaded region is bounded by the lines $\ell _{\bar{n}}=4\ell _{\unicode[STIX]{x1D714}}$ and $\ell _{\bar{n}}=6\ell _{\unicode[STIX]{x1D714}}$, and the dashed black line is $\ell _{\bar{n}}=5\ell _{\unicode[STIX]{x1D714}}$.