Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T09:52:42.887Z Has data issue: false hasContentIssue false

Surface Morphology of GaN: Flat versus Vicinal Surfaces

Published online by Cambridge University Press:  13 June 2014

S.Y. Tong
Affiliation:
Department of Physics, The University of Hong Kong, Pokfulam Road, Hong Kong

Abstract

The surface morphology of GaN films grown by molecular beam epitaxy (MBE) is investigated by scanning tunneling microscopy (STM). A comparison is made between flat and vicinal surfaces. The wurtzite structure of GaN leads to special morphological features such as step pairing and triangularly shaped islands. Spiral mounds due to growth at screw threading dislocations are dominant on flat surfaces, whereas for vicinal GaN, the surfaces show no spiral mound but evenly spaced steps. This observation suggests an effective suppression of screw threading dislocations in the vicinal films. This finding is confirmed by transmission electron microscopy (TEM) studies. Continued growth of the vicinal surface leads to step bunching that is attributed to the effect of electromigration.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.STM images of GaN surfaces following deposition on flat SiC(0001) substrates at (a) and (b) 650°C, (c) 500°C. Note the scale difference between (a) and (b).

Figure 1

Figure 2.STM image of a GaN film grown on a vicinal 4H-SiC(0001) substrate at 650°C. Note the absence of spiral mounds.

Figure 2

Figure 3.A 1D model of a vicinal GaN surface. The consecutive steps belong to type-A and type-B, respectively, as required by the wurtzite crystal structure.

Figure 3

Figure 4.STM image showing step bunching of the vicinal GaN film following prolonged growth at 650°C and heated by a DC along the step-down direction (from left to right).