Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T21:27:42.387Z Has data issue: false hasContentIssue false

A damage-reduced process revealed by photoluminescence in photoelectrochemical etching GaN

Published online by Cambridge University Press:  13 June 2014

J. M. Hwang
Affiliation:
Department of Electrical Engineering, National Tsing-Hua University, Hsin-Chu 300, Taiwan, R.O.C.
J. T. Hsieh
Affiliation:
Department of Electrical Engineering, National Tsing-Hua University, Hsin-Chu 300, Taiwan, R.O.C.
H. L. Hwang
Affiliation:
Department of Electrical Engineering, National Tsing-Hua University, Hsin-Chu 300, Taiwan, R.O.C.
W. H. Hung
Affiliation:
Synchrotron Radiation Research Center, Hsin-Chu 300, Taiwan, R.O.C.

Abstract

Photoelectrochemical (PEC) etching technique has been proven to be an effective method to etch GaN. Despite its success, investigations on etching-induced damage are still scare. In this work, the damage induced by PEC etching of GaN in KOH electrolyte was studied. Photoluminescence (PL) spectroscopy was used to explore the origin of etching-induced damaged layer. From the variable temperature PL measurements, the origin of etching-induced damage was attributed to be the defect complex of VGa-ON (gallium vacancy bonds to oxygeon on nitrogen antisite). With determination of the defect origin, the electronic transition in the etch damage-related yellow luminescence (YL) band was suggested to be deep donor-like state to shallow-acceptor transition. In addition, a post-treatment method with boiled KOH chemical etching was developed to remove the thin damaged layer. In this method, crystallographic etching characteristics of boiled KOH was observed to assist in the formation of smooth sidewall facets. As revealed by the reduction of yellow luminescence, we propose this novel technique as a near damage-free etching method.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Defect induce yellow luminescence in PEC etching GaN with different UV power density

Figure 1

Figure 2.Temperature dependence photoluminescence of GaN (a) as- growth GaN with PL peaks as FE and phonon replica. (b)PEC etching GaN with PL peaks as FE, dislocation, DAP and phonon replica.

Figure 2

Figure 3.Damage remove by PEC etching GaN (a) low concentration of boil KOH with remove the damage layer produced YL in short time treatment. (b) high concentration on of boil KOH and low time treatment will create damage to GaN surface

Figure 3

Figure 4.SEM of PEC etching GaN (a) PEC etching with sidewall roughness and dislocation residual at the etching surface (b)boil KOH solution post-treatment to remove residual dislocation (c) a vertical and smooth etching profile by crystallography etching with boil KOH. solution